单选题Companycom is considering a large partitioned p5 590 to consolidate several smaller systems in their data center. Due to the complexity of the consolidation, the customer is asking the technical support specialist to give them a report which shows pre order PCI adapter placement and validates them against IBM's recommendations. The concern is that the factory will not install the adapters in the appropriate slots as the customer pre-selected. What IBM tool is available to provide this?（）ALPAR Validation Tool （LVT）BPersonal Systems Configurator （PSC）CIBM Configuration for eBusiness （eConfig）DAdvanced System Management Interface （ASMI）
单选题
Companycom is considering a large partitioned p5 590 to consolidate several smaller systems in their data center. Due to the complexity of the consolidation, the customer is asking the technical support specialist to give them a report which shows pre order PCI adapter placement and validates them against IBM's recommendations. The concern is that the factory will not install the adapters in the appropriate slots as the customer pre-selected. What IBM tool is available to provide this?（）
A
LPAR Validation Tool （LVT）
B
Personal Systems Configurator （PSC）
C
IBM Configuration for eBusiness （eConfig）
D
Advanced System Management Interface （ASMI）
参考解析
解析：
暂无解析
相关考题：
Companycom has seven days of vmstat data on four p5 590 production LPARs of four processors each. The data shows that all four LPARs have periodic utilizations of 90-95% lasting several minutes in duration. However, the average utilizations of the four LPARs were between 15-30%. The vmstat data shows that the peak utilizations of each LPAR do not occur at the same time. Which of the following should be set up?（）A、A shared pool with four capped LPARsB、A shared pool with four uncapped LPARsC、Four dedicated LPARs and use DLPAR to manage resources effectivelyD、The server in SMP mode and use WLM to manage resources effectively
Which IBM resource should be used to validate the results from a Disk Magic study PRIOR topresenting the final storage solution and pricing to a customer?（）A、Customer Engineer B、Storage Sales Specialist C、Competeline Representative D、Field Technical Storage Specialist (pre-sales)
A customer with an IBM SAN Volume Controller attached to Windows servers calls their BusinessPartner storage specialist asking for configuration assistance. What is the appropriate response？（）A、contact an IBM Customer EngineerB、send a Service Support Representative （SSR）C、recommend purchase of a Support Line contractD、engage a Field Technical Sales Support （FTSS）
A financial industry customer will consolidate their Intel-based servers to a p5-550 running AIX， and needs experienced technical services. What information should the account executive provide to the customer to assure them that the technical specialist has the required experience？（）A、The technical specialist has supported multiple Cluster 1350 environments. References will be provided.B、The technical specialist is Linux-certified by two industry groups. Certificate copies will be provided.C、The technical specialist has worked on multiple UNIX consolidation projects. References will be provided.D、The technical specialist has worked on Linux consolidation efforts. References will be provided.
Companycom is considering a partitioned solution which will require cumulative rPerf total of 150. The original sizing came back recommending a 32-way p5 590. However, they have a requirement for future scalability and availability is important. Which of the following would be the best reason to recommend a p5 595?（）A、The p5 595 would allow for CODB、The p5 595 includes the Advanced Power Virtualization hardware and softwareC、The p5 595 is priced the same as the p5 590 given the same number/type of CPUsD、The p5 595 performance would be equivalent to the p5 590 given the same number/type of CPUs
A customer has a large UNIX environment and has engaged a pSeries technical specialist to work on a solution with them. Which of the following statements would best establish UNIX credibility with a knowledgeable customer？（）A、The technical support specialist has completed a UNIX course at college.B、The technical specialist has supported several similar projects and has earned an IBM AIX certification.C、The technical support specialist’s company sells $3M of UNIX computer systems every year.D、The technical support specialist has sold and installed at least a dozen Apple and iSeries systems with POWER processors.
Companycom is considering a large partitioned p5 590 to consolidate several smaller systems in their data center. Due to the complexity of the consolidation, the customer is asking the technical support specialist to give them a report which shows pre order PCI adapter placement and validates them against IBM's recommendations. The concern is that the factory will not install the adapters in the appropriate slots as the customer pre-selected. What IBM tool is available to provide this?（）A、LPAR Validation Tool （LVT）B、Personal Systems Configurator （PSC）C、IBM Configuration for eBusiness （eConfig）D、Advanced System Management Interface （ASMI）
The account executive is asking about post-sales support for a new p5 HMC. They need the pSeries technical specialist to configure an HMC with software support for the customer. Which of the following should the specialist include in the configuration？（）A、SupportlineB、ServiceSuiteC、Software Maintenance Agreement （SWMA）D、Machine Control Program Remote Support Agreement （MCPRSA）
A customer is getting ready to install a new pSeries system into their data center. They are concerned about providing the appropriate clearance around their 7014-T42 to allow for maintenance. What reference material should the pSeries technical specialist provide to the customer？（）A、Sales ManualB、Announcement LetterC、Site and Hardware Planning InformationD、Adapter， Devices， and Cable Information for Multiple Bus Systems
When designing a single tier AIX database solution for a customer， what other technical specialist would be most instrumental in putting together a total solution and why？（）A、xSeries specialist，as the customer may have some Intel-based systems.B、Hardware customer engineer，as they will be installing the entire solution.C、Services specialist，as they can provide education recommendations for the entire solution. D、Storage specialist，as the customer may need disk to store the data and tape to backup the data.
A pSeries technical specialist has been asked to provide a server consolidation solution to replace several AIX servers running typical commercial database workloads. Benchmarks for SPECint， SPECfp， SPECjbb as well as estimates of ROLTP and rPerf are available for all the current systems. Which of the following could be used as a first approximation of total performance required for one large server？（）A、Sum of SPECfp valuesB、Sum of rPerf values onlyC、Sum of rPerf and ROLTP valuesD、Sum of SPECint and SPECjbb values
A customer currently has five partitioned POWER4 systems and is adding new systems. When the pSeries technical specialist introduces the first p5 system with CoD into this environment， how should the HMC be handled？（）A、Order a new HMC to support the p5 system.B、Attach the new p5 system to the existing HMC.C、Upgrade the existing HMC to accommodate both the POWER4 and p5 systems.D、Do nothing. This system does not require an HMC.
Companycom is considering a partitioned solution with one of the LPARs utilizing 12 CPUs. Multiple applications will be loaded on this large LPAR. However, the customer wants to ensure some tasks will have higher priority access to the CPU and memory resources. Which of the following solutions would best satisfy the requirement?（）A、LoadlevelerB、AIX Workload ManagerC、Partition Load ManagerD、Tivoli Provisioning Manager
The account team is putting together a very complex solution for the customer. During the solution design phase， many of the customer’s requirements have changed and additional requirements are being identified. What should the pSeries technical specialist do to ensure the greatest possible customer satisfaction？（）A、Use eConfig to configure and validate each pSeries and p5 system.B、Engage Advanced Technical Support to review any outstanding technical issues.C、Confirm with the customer that the solution design meets their requirements.D、Perform a Pre-Install Solution Assurance Review to validate required power requirements.
单选题When designing a single tier AIX database solution for a customer， what other technical specialist would be most instrumental in putting together a total solution and why？（）AxSeries specialist，as the customer may have some Intel-based systems.BHardware customer engineer，as they will be installing the entire solution.CServices specialist，as they can provide education recommendations for the entire solution. DStorage specialist，as the customer may need disk to store the data and tape to backup the data.
单选题A pSeries technical specialist has been asked to provide a server consolidation solution to replace several AIX servers running typical commercial database workloads. Benchmarks for SPECint， SPECfp， SPECjbb as well as estimates of ROLTP and rPerf are available for all the current systems. Which of the following could be used as a first approximation of total performance required for one large server？（）ASum of SPECfp valuesBSum of rPerf values onlyCSum of rPerf and ROLTP valuesDSum of SPECint and SPECjbb values
单选题Companycom has seven days of vmstat data on four p5 590 production LPARs of four processors each. The data shows that all four LPARs have periodic utilizations of 90-95% lasting several minutes in duration. However, the average utilizations of the four LPARs were between 15-30%. The vmstat data shows that the peak utilizations of each LPAR do not occur at the same time. Which of the following should be set up?（）AA shared pool with four capped LPARsBA shared pool with four uncapped LPARsCFour dedicated LPARs and use DLPAR to manage resources effectivelyDThe server in SMP mode and use WLM to manage resources effectively
单选题A customer has a large UNIX environment and has engaged a pSeries technical specialist to work on a solution with them. Which of the following statements would best establish UNIX credibility with a knowledgeable customer？（）AThe technical support specialist has completed a UNIX course at college.BThe technical specialist has supported several similar projects and has earned an IBM AIX certification.CThe technical support specialist’s company sells $3M of UNIX computer systems every year.DThe technical support specialist has sold and installed at least a dozen Apple and iSeries systems with POWER processors.
单选题A customer with an IBM SAN Volume Controller attached to Windows servers calls their BusinessPartner storage specialist asking for configuration assistance. What is the appropriate response？（）Acontact an IBM Customer EngineerBsend a Service Support Representative （SSR）Crecommend purchase of a Support Line contractDengage a Field Technical Sales Support （FTSS）
单选题A customer is getting ready to install a new pSeries system into their data center. They are concerned about providing the appropriate clearance around their 7014-T42 to allow for maintenance. What reference material should the pSeries technical specialist provide to the customer？（）ASales ManualBAnnouncement LetterCSite and Hardware Planning InformationDAdapter， Devices， and Cable Information for Multiple Bus Systems
单选题A financial industry customer will consolidate their Intel-based servers to a p5-550 running AIX， and needs experienced technical services. What information should the account executive provide to the customer to assure them that the technical specialist has the required experience？（）AThe technical specialist has supported multiple Cluster 1350 environments. References will be provided.BThe technical specialist is Linux-certified by two industry groups. Certificate copies will be provided.CThe technical specialist has worked on multiple UNIX consolidation projects. References will be provided.DThe technical specialist has worked on Linux consolidation efforts. References will be provided.
单选题The account executive is asking about post-sales support for a new p5 HMC. They need the pSeries technical specialist to configure an HMC with software support for the customer. Which of the following should the specialist include in the configuration？（）ASupportlineBServiceSuiteCSoftware Maintenance Agreement （SWMA）DMachine Control Program Remote Support Agreement （MCPRSA）
单选题A new p5 customer has just installed a partitioned p5-550 alongside some older POWER4 servers. The pSeries technical specialist has received a call to say that the existing HMC （7315） cannot connect to the new server. How can the specialist help the customer？（）AExplain to the customer that they need an additional HMC for the POWER5 system.BObtain a PO from the customer to purchase additional serial connections to the HMC.CObtain a PO from the customer to purchase additional Ethernet connections to the HMC.DExplain to the customer that they need a firmware update on the HMC to support both POWER4 and POWER5.
单选题The account team is putting together a very complex solution for the customer. During the solution design phase， many of the customer’s requirements have changed and additional requirements are being identified. What should the pSeries technical specialist do to ensure the greatest possible customer satisfaction？（）AUse eConfig to configure and validate each pSeries and p5 system.BEngage Advanced Technical Support to review any outstanding technical issues.CConfirm with the customer that the solution design meets their requirements.DPerform a Pre-Install Solution Assurance Review to validate required power requirements.
单选题A customer currently has five partitioned POWER4 systems and is adding new systems. When the pSeries technical specialist introduces the first p5 system with CoD into this environment， how should the HMC be handled？（）AOrder a new HMC to support the p5 system.BAttach the new p5 system to the existing HMC.CUpgrade the existing HMC to accommodate both the POWER4 and p5 systems.DDo nothing. This system does not require an HMC.
单选题Companycom is considering a partitioned solution with one of the LPARs utilizing 12 CPUs. Multiple applications will be loaded on this large LPAR. However, the customer wants to ensure some tasks will have higher priority access to the CPU and memory resources. Which of the following solutions would best satisfy the requirement?（）ALoadlevelerBAIX Workload ManagerCPartition Load ManagerDTivoli Provisioning Manager
单选题Companycom is considering a partitioned solution which will require cumulative rPerf total of 150. The original sizing came back recommending a 32-way p5 590. However, they have a requirement for future scalability and availability is important. Which of the following would be the best reason to recommend a p5 595?（）AThe p5 595 would allow for CODBThe p5 595 includes the Advanced Power Virtualization hardware and softwareCThe p5 595 is priced the same as the p5 590 given the same number/type of CPUsDThe p5 595 performance would be equivalent to the p5 590 given the same number/type of CPUs