单选题The command frame-relay map ip 10.121.16.8 102 broadcast was entered on the router. Which of the following statements is true concerning this command()。AThis command should be executed from the global configuration modeBThe IP address 10.121.16.8 is the local router port used to forward dataC102 is the remote DLCI that will receive the informationDThis command is required for all Frame Relay configurationsEThe broadcast option allows packets, such as RIP updates, to be forwarded across the PVC

单选题
The command frame-relay map ip 10.121.16.8 102 broadcast was entered on the router. Which of the following statements is true concerning this command()。
A

This command should be executed from the global configuration mode

B

The IP address 10.121.16.8 is the local router port used to forward data

C

102 is the remote DLCI that will receive the information

D

This command is required for all Frame Relay configurations

E

The broadcast option allows packets, such as RIP updates, to be forwarded across the PVC


参考解析

解析: 暂无解析

相关考题:

在配置命令frame-relay map ip10.1.1.17broadcast中,数字7的含义是()。A.本端逻辑通道编号B.本端DLC编号C.对端接口编号D.对端节点编号

下面是某路由器的部分配置信息,解释(n)处标有下划线的含义。【配置路由器信息】Current configuration:!version 11.3no service password-encryption!hostname r1//第(1)处!enable password 123456//第(2)处!interface Ethemet0ip address 192.4.1.1 255.255.255.0!interface Sefta10ip address 192.3.1.1 255.255.255.0encapsulation frame-relay IETF//第(3)处no ip mroute-cachebandwidth 4000//第(4)处frame-relay map ip 192.163.0.2 100 broadcast//第(5)处frame-relay lmi-type cisco!router ospf 1//第(6)处network 202.1.1.0 0.0.0.255 area 0//第(7)处network 202.3.1.0 0.0.0.255 area 0network 202.4.1.0 0.0.0.255 area 0neighbor 202.1.1.2//第(8)处!……End

在配置命令frame-relay map ip 192.168.1.1 dlci 101 broadcast中,数字101的含义是(53)。A.本端逻辑通道编号B.本端数据链路编号C.对端物理接口编号D.对端链路节点编号

在图8-7所示的网络拓扑结构的分支机构路由器上,正确的拨号映射配置语句是(53)。A.dialer map ip 192.168.0.2 name branch MODEM-script. dialout broadcast 2083150B.dialer map ip 192.168.0.2 name center MODEM-script. dialout broadcast 2083703C.dialer map ip 192.168.0.1 name branch MODEM-script. dialout broadcast 2083150D.dialer map ip 192.168.0.1 name center MODEM-script. dialout broadcast 2083703

OSPF is configured over a Frame Relay network as shown in the exhibit. All PVCs are active.However, R1 and R3 fail to see all OSPF routes in their routing tables. The show ip ospf neighbor command executed on R2 shows the state of t he neighbors. What should be done to fix the problem? ()A. The ip ospf network broadcast command should be configured on each Frame Relay interfaceB. The ip ospf network non -broadcast command should be configured on each Frame Relay interfaceC. Th e ip ospf priority value on the spoke routers should be set to 0D. The ip ospf priority value on the hub router should be set to 0E. The neighbor command should be configured under the OSPF routing process on all routers

Refer to the exhibit.What is the meaning of the term dynamic as displayed in the output of the show frame-relay map command shown?() A.The Seria l0/0interface is passing traffic.B.The DLCI 100 was dynamic allyallocated by the routerC.The Seria l0/0 interf aceacquired the IP address of 172.16.3.1 from a DHCP serverD.The DLCI 100 will be dynamically changed as required to adapt to changes in the Frame Relay cloudE.The mapping between DLCI 100 and the end station IP address 172.16.3.1 was learned through Inverse ARP

当输入frame-relay map ip10.12.168.1105 broadcast时,以下选项正确的是()。 A.该命令该在全局下配置执行B.ip地址10.12.168.1是本地路由器用来转发数据的接口C.105是远端的DLICI,他将接受信息D.这个命令要求被配置为所有的帧中继配置E.该广播选项允许一些数据包,ospf更新信息被转发通过PVC

在“frame-relay map ip192.168.0.1100”这条命令中192.168.0.1和100指的是对端路由器的IP地址和DLCI。

Which of the following statements correctly describes the characteristics of a Frame Relay point-to-point subinterface?()A、Needs to use Inverse ARP.B、Maps a single IP subnet per DLCI.C、Maps a single IP subnet across multiple DLCIs.D、Resolves NBMA (non broadcast multi access) split horizon issues.E、Requires use of the frame-relay map command.F、None of the above

“frame-relay map ip 10.121.16.8 102 broadcast”被输入路由器上。以下哪项关于这个命令的陈述是正确的?()A、广播选项允许数据包,如RIP更新,转发访问PVCB、命令768,16从戈布尔配置模式下执行C、102是他的远程DLCI,将recive的信息D、IP地址10.121.16.8是用来转发日期本地路由器端口E、该命令要求所有帧依靠配置

The command frame-relay map ip 10.121.16.8 102 broadcast was entered on the router. Which of the following statements is true concerning this command?()A、This command should be executed from the global configuration mode.B、The IP address 10.121.16.8 is the local router port used to forward data.C、102 is the remote DLCI that will receive the information.D、This command is required for all Frame Relay configurations.E、The broadcast option allows packets, such as RIP updates, to be forwarded across the PVC

在配置命令frame-relay map ip 10.1.1.1 dlci 7 broadcast中,数字7含义是()A、本端逻辑通道编号B、本端DLCI编号C、对端接口编号D、对端节点编号

What is the result of issuing the frame-relay map ip 192.168.1.2 202 broadcast command?()A、defines the source IP address that is used in all broadcast packets on DLCI 202B、defines the DLCI that is used for all packets that are sent to the 192.168.1.2 IP addressC、defines the destination IP address that is used in all broadcast packets on DLCI 202D、defines the DLCI on which packets from the 192.168.1.2 IP address are received

Refer to the exhibit. What is the meaning of the term dynamic as displayed in the output of the show frame-relay map command shown?()A、The Serial0/0 interface is passing traffic.B、The DLCI 100 was dynamically allocated by the routerC、The Serial0/0 interface acquired the IP address of 172.16.3.1 from a DHCP serverD、The DLCI 100 will be dynamically changed as required to adapt to changes in the Frame Relay cloudE、The mapping between DLCI 100 and the end station IP address 172.16.3.1 was learned through Inverse ARP

What are the steps for configuring stateful NBAR for dynamic protocols? ()A、use the command ip nbar protocol-discovery to allow identification of stateful protocols. Use the command ip nbar port-map to attach the protocols to an interfaceB、use the command match protocol rtp to allow identification of real-time audio and video traffic. Use the command ip nbar port-map to extend the NBAR functionality for well-known protocols to new port numbersC、use the command match protocol to allow identification of stateful protocols. Use the command ip nbar port-map to attach the protocols to an interfaceD、configure a traffic class. Configure a traffic policy. Attach the traffic policy to an interface. E、configure video streaming. Configure audio streaming. Attach the codec to an interface

What two statistics appear in show frame-relay map output?()A、The number of FECN packets that are received by the routerB、The number of BECN packets that are received by the router.C、The ip address of the local routerD、The value of the local DLCIE、The status of the PVC that is configured on the router

What are the steps for configuring stateful NBAR for dynamic protocols?()A、Use the command ip nbar protocol-discovery to allow identification of stateful protocols. Use the command ip nbar port-map to attach the protocols to an interface.B、Use the command match protocol rtp to allow identification of real-time audio and video traffic. Use thecommand ip nbar port-map to extend the NBAR functionality for well-known protocols to new port numbers.C、Use the command match protocol to allow identification of stateful protocols. Use the command ip nbar port-map to attach the protocols to an interface.D、Configure a traffic class. Configure a traffic policy. Attach the traffic policy to an interface.E、Configure video streaming. Configure audio streaming. Attach the codec to an interface.

What is the result of issuing the frame-relay map ip 192.168.1.2 202 broadcast command?()A、defines the source IP address that i s used in all broadcast packets on DLCI 202B、defines the DLCI that is used for all packets that are sent to the 192.168.1.2 IP addressC、defines the destination IP address that is used in all broadcast packets on DLCI 202D、defines the DLCI on which packets from the 192.168.1.2 IP address are received

What two statistics appear in show frame-relay map output?()A、The number of FECN packets that are received by the routerB、The number of BECN packets that are received by the routerC、The ip address of the local routerD、The value of the local DLCIE、The status of the PVC that is configured on the router

The command frame-relay map ip 10.121.16.8 102 broadcast was entered on the router. Which of the following statements is true concerning this command()。A、This command should be executed from the global configuration modeB、The IP address 10.121.16.8 is the local router port used to forward dataC、102 is the remote DLCI that will receive the informationD、This command is required for all Frame Relay configurationsE、The broadcast option allows packets, such as RIP updates, to be forwarded across the PVC

当输入frame-relay map ip10.12.168.1105 broadcast时,以下选项正确的是()。A、该命令该在全局下配置执行B、ip地址10.12.168.1是本地路由器用来转发数据的接口C、105是远端的DLICI,他将接受信息D、这个命令要求被配置为所有的帧中继配置E、该广播选项允许一些数据包,ospf更新信息被转发通过PVC

单选题The command frame-relay map ip 10.121.16.8 102 broadcast was entered on the router. Which of the following statements is true concerning this command?()AThis command should be executed from the global configuration mode.BThe IP address 10.121.16.8 is the local router port used to forward data.C102 is the remote DLCI that will receive the information.DThis command is required for all Frame Relay configurations.EThe broadcast option allows packets, such as RIP updates, to be forwarded across the PVC

单选题“frame-relay map ip 10.121.16.8 102 broadcast”被输入路由器上。以下哪项关于这个命令的陈述是正确的?()A广播选项允许数据包,如RIP更新,转发访问PVCB命令768,16从戈布尔配置模式下执行C102是他的远程DLCI,将recive的信息DIP地址10.121.16.8是用来转发日期本地路由器端口E该命令要求所有帧依靠配置

单选题The command frame-relay map ip 10.121.16.8 102 broadcast was entered on the router. Which of the following statements is true concerning this command()。AThis command should be executed from the global configuration modeBThe IP address 10.121.16.8 is the local router port used to forward dataC102 is the remote DLCI that will receive the informationDThis command is required for all Frame Relay configurationsEThe broadcast option allows packets, such as RIP updates, to be forwarded across the PVC

单选题In order to troubleshoot an issue with the Testking frame relay network, you log into a remote router via a telnet session and issue the command "debug frame-relay lmi". After a long wait, you fail to see any output. What could be the cause of this problem?()AThe IP addresses are configured incorrectly.BFrame Relay LMI messages not displayed in real time.CThe administrator must issue the enable frame-relay lmi debug command.DThe administrator must issue the terminal monitor command.EDebug messages can only be received once through the console port.FThe administrator must issue the show frame-relay lmi vty 0 4 command

单选题Refer to the exhibit. What is the meaning of the term dynamic as displayed in the output of the show frame-relay map command shown?()AThe Serial0/0 interface is passing traffic.BThe DLCI 100 was dynamically allocated by the routerCThe Serial0/0 interface acquired the IP address of 172.16.3.1 from a DHCP serverDThe DLCI 100 will be dynamically changed as required to adapt to changes in the Frame Relay cloudEThe mapping between DLCI 100 and the end station IP address 172.16.3.1 was learned through Inverse ARP

多选题Which of the following statements correctly describes the characteristics of a Frame Relay point-to-point subinterface?()ANeeds to use Inverse ARP.BMaps a single IP subnet per DLCI.CMaps a single IP subnet across multiple DLCIs.DResolves NBMA (non broadcast multi access) split horizon issues.ERequires use of the frame-relay map command.FNone of the above

单选题What are the steps for configuring stateful NBAR for dynamic protocols? ()Ause the command ip nbar protocol-discovery to allow identification of stateful protocols. Use the command ip nbar port-map to attach the protocols to an interfaceBuse the command match protocol rtp to allow identification of real-time audio and video traffic. Use the command ip nbar port-map to extend the NBAR functionality for well-known protocols to new port numbersCuse the command match protocol to allow identification of stateful protocols. Use the command ip nbar port-map to attach the protocols to an interfaceDconfigure a traffic class. Configure a traffic policy. Attach the traffic policy to an interface. Econfigure video streaming. Configure audio streaming. Attach the codec to an interface