当输入frame－relay map ip10.12.168.1105 broadcast时,以下选项正确的是()。 A.该命令该在全局下配置执行B.ip地址10.12.168.1是本地路由器用来转发数据的接口C.105是远端的DLICI，他将接受信息D.这个命令要求被配置为所有的帧中继配置E.该广播选项允许一些数据包，ospf更新信息被转发通过PVC
当输入frame－relay map ip10.12.168.1105 broadcast时,以下选项正确的是()。
A.该命令该在全局下配置执行
B.ip地址10.12.168.1是本地路由器用来转发数据的接口
C.105是远端的DLICI，他将接受信息
D.这个命令要求被配置为所有的帧中继配置
E.该广播选项允许一些数据包，ospf更新信息被转发通过PVC
相关考题：
下面是某路由器的部分配置信息，解释(n)处标有下划线的含义。【配置路由器信息】Current configuration：!version 11.3no service password-encryption!hostname r1//第(1)处!enable password 123456//第(2)处!interface Ethemet0ip address 192.4.1.1 255.255.255.0!interface Sefta10ip address 192.3.1.1 255.255.255.0encapsulation frame-relay IETF//第(3)处no ip mroute-cachebandwidth 4000//第(4)处frame-relay map ip 192.163.0.2 100 broadcast//第(5)处frame-relay lmi-type cisco!router ospf 1//第(6)处network 202.1.1.0 0.0.0.255 area 0//第(7)处network 202.3.1.0 0.0.0.255 area 0network 202.4.1.0 0.0.0.255 area 0neighbor 202.1.1.2//第(8)处!……End
在如图4-3所示的网络拓扑结构的分支机构路由器上，正确的拨号映射配置语句是(29)。A．dialer map中192.168.0.2 name branch MODEM-script. dialout broadcast 2083150B．dialer map中192.168.0.2 name center MODEM-script. dialout broadcast 2083703C．dialer map中192.168.0.1 name branch MODEM-script. dialout broadcast 2083150D．dialer map中192.168.0.1 name center MODEM-script. dialout broadcast 2083703
在配置命令frame-relay map ip 192.168.1.1 dlci 101 broadcast中，数字101的含义是(53)。A．本端逻辑通道编号B．本端数据链路编号C．对端物理接口编号D．对端链路节点编号
查看帧中继PVC路由表的命令是（ ） A、 show frame-relay pvc B、 show frame-relay route C、 show frame-relay pvc route D、 show rame-relay map
In regard to a hub and spoke Frame－Relay data network, what kind of physical network is it classified as?() A. point-to-pointB. broadcast multi-accessC. nonbroadcast multipointD. nonbroadcast multi-accessE. broadcast point-to-multipoint
In regard to a hub and spoke Frame-Relay data network, what kind of physical network is it classified as?（）A、point-to-pointB、broadcast multi-accessC、nonbroadcast multipointD、nonbroadcast multi-accessE、broadcast point-to-multipoint
Which of the following statements correctly describes the characteristics of a Frame Relay point-to-point subinterface?（）A、Needs to use Inverse ARP.B、Maps a single IP subnet per DLCI.C、Maps a single IP subnet across multiple DLCIs.D、Resolves NBMA (non broadcast multi access) split horizon issues.E、Requires use of the frame-relay map command.F、None of the above
“frame-relay map ip 10.121.16.8 102 broadcast”被输入路由器上。以下哪项关于这个命令的陈述是正确的？（）A、广播选项允许数据包，如RIP更新，转发访问PVCB、命令768，16从戈布尔配置模式下执行C、102是他的远程DLCI，将recive的信息D、IP地址10.121.16.8是用来转发日期本地路由器端口E、该命令要求所有帧依靠配置
The command frame-relay map ip 10.121.16.8 102 broadcast was entered on the router. Which of the following statements is true concerning this command？（）A、This command should be executed from the global configuration mode.B、The IP address 10.121.16.8 is the local router port used to forward data.C、102 is the remote DLCI that will receive the information.D、This command is required for all Frame Relay configurations.E、The broadcast option allows packets， such as RIP updates， to be forwarded across the PVC
在配置命令frame-relay map ip 10.1.1.1 dlci 7 broadcast中，数字7含义是（）A、本端逻辑通道编号B、本端DLCI编号C、对端接口编号D、对端节点编号
The Frame Relay network in the diagram is not functioning properly. What is the cause of the problem?（）A、The Gallant router has the wrong LMI type configuredB、Inverse ARP is providing the wrong PVC information to the Gallant routerC、The S3 interface of the Steele router has been configured with the frame-relay encapsulation ietf commandD、The frame-relay map statement in the Attalla router for the PVC to Steele is not correctE、The IP address on the serial interface of the Attalla router is configured incorrectly
What is the result of issuing the frame-relay map ip 192.168.1.2 202 broadcast command?（）A、defines the source IP address that is used in all broadcast packets on DLCI 202B、defines the DLCI that is used for all packets that are sent to the 192.168.1.2 IP addressC、defines the destination IP address that is used in all broadcast packets on DLCI 202D、defines the DLCI on which packets from the 192.168.1.2 IP address are received
What two statistics appear in show frame-relay map output?（）A、The number of FECN packets that are received by the routerB、The number of BECN packets that are received by the router.C、The ip address of the local routerD、The value of the local DLCIE、The status of the PVC that is configured on the router
What is the result of issuing the frame-relay map ip 192.168.1.2 202 broadcast command?（）A、defines the source IP address that i s used in all broadcast packets on DLCI 202B、defines the DLCI that is used for all packets that are sent to the 192.168.1.2 IP addressC、defines the destination IP address that is used in all broadcast packets on DLCI 202D、defines the DLCI on which packets from the 192.168.1.2 IP address are received
What two statistics appear in show frame-relay map output?（）A、The number of FECN packets that are received by the routerB、The number of BECN packets that are received by the routerC、The ip address of the local routerD、The value of the local DLCIE、The status of the PVC that is configured on the router
The command frame-relay map ip 10.121.16.8 102 broadcast was entered on the router. Which of the following statements is true concerning this command（）。A、This command should be executed from the global configuration modeB、The IP address 10.121.16.8 is the local router port used to forward dataC、102 is the remote DLCI that will receive the informationD、This command is required for all Frame Relay configurationsE、The broadcast option allows packets, such as RIP updates, to be forwarded across the PVC
关于SPEED BRAKE ARMED灯，以下说法正确的是（）A、当减速板手柄在UP位时，该灯不作动B、是绿色的灯，当减速板手柄在ARM位时，该灯亮，表明自动减速板系统各项输入信号正确C、是绿色的灯，当减速板手柄在ARM位时，该灯亮，表明自动减速板系统各项输入信号正确D、是绿色的灯，当减速板手柄在的down位时，该灯亮，表明自动减速板系统各项输入信号正确
当输入frame-relay map ip10.12.168.1105 broadcast时，以下选项正确的是（）。A、该命令该在全局下配置执行B、ip地址10.12.168.1是本地路由器用来转发数据的接口C、105是远端的DLICI，他将接受信息D、这个命令要求被配置为所有的帧中继配置E、该广播选项允许一些数据包，ospf更新信息被转发通过PVC
单选题The command frame-relay map ip 10.121.16.8 102 broadcast was entered on the router. Which of the following statements is true concerning this command？（）AThis command should be executed from the global configuration mode.BThe IP address 10.121.16.8 is the local router port used to forward data.C102 is the remote DLCI that will receive the information.DThis command is required for all Frame Relay configurations.EThe broadcast option allows packets， such as RIP updates， to be forwarded across the PVC
单选题“frame-relay map ip 10.121.16.8 102 broadcast”被输入路由器上。以下哪项关于这个命令的陈述是正确的？（）A广播选项允许数据包，如RIP更新，转发访问PVCB命令768，16从戈布尔配置模式下执行C102是他的远程DLCI，将recive的信息DIP地址10.121.16.8是用来转发日期本地路由器端口E该命令要求所有帧依靠配置
单选题当输入frame-relay map ip10.12.168.1105 broadcast时，以下选项正确的是（）。A该命令该在全局下配置执行Bip地址10.12.168.1是本地路由器用来转发数据的接口C105是远端的DLICI，他将接受信息D这个命令要求被配置为所有的帧中继配置E该广播选项允许一些数据包，ospf更新信息被转发通过PVC
单选题The command frame-relay map ip 10.121.16.8 102 broadcast was entered on the router. Which of the following statements is true concerning this command（）。AThis command should be executed from the global configuration modeBThe IP address 10.121.16.8 is the local router port used to forward dataC102 is the remote DLCI that will receive the informationDThis command is required for all Frame Relay configurationsEThe broadcast option allows packets, such as RIP updates, to be forwarded across the PVC
多选题Which of the following statements correctly describes the characteristics of a Frame Relay point-to-point subinterface?（）ANeeds to use Inverse ARP.BMaps a single IP subnet per DLCI.CMaps a single IP subnet across multiple DLCIs.DResolves NBMA (non broadcast multi access) split horizon issues.ERequires use of the frame-relay map command.FNone of the above