单选题A user has just moved a PC from one office to another. The patch cable and the NIC do notappear to be functioning in the new office but were working before the move. The patch cable is plugged in correctly to both the NIC and the wall jack. Which of the following actions should the technician take FIRST?()AVerify that the network card is compatible with the operating system.BVerify that the port on the switch is enabled.CUpdate the network card driver.DReplace the network cable with a crossover cable.

单选题
A user has just moved a PC from one office to another. The patch cable and the NIC do notappear to be functioning in the new office but were working before the move. The patch cable is plugged in correctly to both the NIC and the wall jack. Which of the following actions should the technician take FIRST?()
A

Verify that the network card is compatible with the operating system.

B

Verify that the port on the switch is enabled.

C

Update the network card driver.

D

Replace the network cable with a crossover cable.


参考解析

解析: 暂无解析

相关考题:

An administrator is having a hard time adding a new switch to the network. After verifying that allthe ports are configured correctly on each switch, which of the following should the administratorverily NEXT?()A. Straight-through cable is used to connect both switchesB. Loopback plug is connectedC. Crossover cable is used to connect both switchesD. Cable is a rollover cable

An administrator has just installed a new NIC into the server. The system POSTs fine and the NIC is recognized by the OS, but it does not receive an IP address. Which of the following is the MOST likely cause of this?()A. The NIC is not on the HCL.B. The driver is incorrect on the server.C. The patch cable has not been seated properly.D. The NIC is not seated properly.

Which of the following cables can be used to directly connect a laptop to a PC for ICS?()A、IEEE 1394 cableB、CAT5 crossover cableC、CAT5e patch cableD、Parallel cable

An administrator just installed a new RAID controller card into a server. The firmware is current for the controller card. When the server is powered up the administrator notices that the RAID controller card is not recognized during POST. Which of the following is the cause of the problem?()A、The hard drives were not plugged into the server correctly.B、The controller driver is outdated and needs to be updated from the OEMs website.C、The firmware for the server is too old and does not support the new RAID controller card.D、The cable from the controller to the hard drive backplane is not connected.

A user explains that after the office was vacuumed the previous night their sound is not working and they cannot get onto the network. The user has verified that all of the PC’s cables are plugged into their respective ports. Which of the following is the MOST likely cause?()A、Frayed or broken cablesB、UPS is unpluggedC、NIC and sound card are disabled in Device ManagerD、Speakers are muted

An administrator has just installed a new NIC into the server. The system POSTs fine and the NIC is recognized by the OS, but it does not receive an IP address. Which of the following is the MOST likely cause of this?()A、The NIC is not on the HCL.B、The driver is incorrect on the server.C、The patch cable has not been seated properly.D、The NIC is not seated properly.

A user is attempting to connect to the network remotely using a laptop and dial-up. The user plugsthe cable into the only available laptop connection, but the connector is loose inside the port. TheMOST likely reason the connector is loose is the:()A、RJ-11 connector needs to be re-crimpedB、User has plugged into the laptop's NIC portC、User has plugged the wrong end of the cable into the portD、RJ-11 connector needs to be replaced with an RJ-45 connector

An administrator is having a hard time adding a new switch to the network. After verifying that allthe ports are configured correctly on each switch, which of the following should the administratorverily NEXT?()A、Straight-through cable is used to connect both switchesB、Loopback plug is connectedC、Crossover cable is used to connect both switchesD、Cable is a rollover cable

Which of the following should be used to test an internal NIC without having to connect it to thenetwork?()A、Loopback cableB、Crossover cableC、Rollover cableD、Straight cable

A frustrated customer has called about their computer that is not functioning correctly. Which of the following is the BEST question to ask the user?()A、“Can you avoid using the PC that crashed?”B、“What was the last thing that occurred before the PC had problems?”C、“What were you doing before the PC went down?”D、“What was the last thing you did before the PC crashed?”

A user has just moved a PC from one office to another. The patch cable and the NIC do notappear to be functioning in the new office but were working before the move. The patch cable is plugged in correctly to both the NIC and the wall jack. Which of the following actions should the technician take FIRST?()A、Verify that the network card is compatible with the operating system.B、Verify that the port on the switch is enabled.C、Update the network card driver.D、Replace the network cable with a crossover cable.

A technician is told to make 50 foot (15.24 meters) patch cables, and is given a spool of CAT6UTP cable and a bag of RG-45 connectors. Which of the following tools would BEST be used todo this task?()A、A cable testerB、A crimperC、A cable wiring chartD、A toner probeE、A multimeterF、A cutting shear

When making a serial connection between two Windows 2000 machines, which type of cable is needed for proper communications?()A、RG-59 coaxial cableB、RS-232 Null Modem cableC、telephone cableD、UTP CAT5 patch cable

Your company has a main office and 40 branch offices. Each branch office is configured as a  separate Active Directory site that has a dedicated read-only domain controller (RODC). An  RODC server is stolen from one of the branch offices.     You need to identify the user accounts that were cached on the stolen RODC server.     Which utility should you use()A、Dsmod.exeB、Ntdsutil.exeC、Active Directory Sites and ServicesD、Active Directory Users and Computers

A manufacturing company has a large facility which has its offices at one end and a manufacturing floor at the other.  The company is looking to implement new equipment that requires access to the company’s SAN that is over 2.4 kilometers away in the office area. Which of the following solutions will satisfy this requirement?()A、Install a longwave GBIC in the office SAN switch and string a multimode fibre from the office to the manufacturing floorB、Install a longwave GBIC in the office SAN switch and string a singlemode fibre from the office to the manufacturing floorC、Install a shortwave GBIC in the office SAN switch and string a multimode fibre from the office to the manufacturing floorD、Install a shortwave GBIC in the office SAN switch and string a singlemode fibre from the office to the manufacturing floor

单选题An administrator has just installed a new NIC into the server. The system POSTs fine and the NIC is recognized by the OS, but it does not receive an IP address. Which of the following is the MOST likely cause of this?()AThe NIC is not on the HCL.BThe driver is incorrect on the server.CThe patch cable has not been seated properly.DThe NIC is not seated properly.

单选题Your company has a main office and a branch office. The branch office has an Active Directory  site that contains a read-only domain controller (RODC).   A user from the branch office reports that his account is locked out. From a writable domain  controller in the main office, you discover that the user’s account is not locked out.     You need to ensure that the user can log on to the domain.     What should you do()AModify the Password Replication Policy.BReset the password of the user account.CRun the Knowledge Consistency Checker (KCC) on the RODC.DRestore network communication between the branch office and the main office.

单选题An administrator is having a hard time adding a new switch to the network. After verifying that allthe ports are configured correctly on each switch, which of the following should the administratorverily NEXT?()AStraight-through cable is used to connect both switchesBLoopback plug is connectedCCrossover cable is used to connect both switchesDCable is a rollover cable

单选题An administrator just installed a new RAID controller card into a server. The firmware is current for the controller card. When the server is powered up the administrator notices that the RAID controller card is not recognized during POST. Which of the following is the cause of the problem?()AThe hard drives were not plugged into the server correctly.BThe controller driver is outdated and needs to be updated from the OEMs website.CThe firmware for the server is too old and does not support the new RAID controller card.DThe cable from the controller to the hard drive backplane is not connected.

单选题Which of the following should be used to test an internal NIC without having to connect it to thenetwork?()ALoopback cableBCrossover cableCRollover cableDStraight cable

单选题When making a serial connection between two Windows 2000 machines, which type of cable is needed for proper communications?()ARG-59 coaxial cableBRS-232 Null Modem cableCtelephone cableDUTP CAT5 patch cable

单选题Which of the following cables can be used to directly connect a laptop to a PC for ICS?()AIEEE 1394 cableBCAT5 crossover cableCCAT5e patch cableDParallel cable

单选题Your company has a main office and 40 branch offices. Each branch office is configured as a  separate Active Directory site that has a dedicated read-only domain controller (RODC). An  RODC server is stolen from one of the branch offices.     You need to identify the user accounts that were cached on the stolen RODC server.     Which utility should you use()ADsmod.exeBNtdsutil.exeCActive Directory Sites and ServicesDActive Directory Users and Computers

单选题A frustrated customer has called about their computer that is not functioning correctly. Which of the following is the BEST question to ask the user?()A“Can you avoid using the PC that crashed?”B“What was the last thing that occurred before the PC had problems?”C“What were you doing before the PC went down?”D“What was the last thing you did before the PC crashed?”

单选题A user is attempting to connect to the network remotely using a laptop and dial-up. The user plugsthe cable into the only available laptop connection, but the connector is loose inside the port. TheMOST likely reason the connector is loose is the:()ARJ-11 connector needs to be re-crimpedBUser has plugged into the laptop's NIC portCUser has plugged the wrong end of the cable into the portDRJ-11 connector needs to be replaced with an RJ-45 connector

单选题A manufacturing company has a large facility which has its offices at one end and a manufacturing floor at the other.  The company is looking to implement new equipment that requires access to the company’s SAN that is over 2.4 kilometers away in the office area. Which of the following solutions will satisfy this requirement?()AInstall a longwave GBIC in the office SAN switch and string a multimode fibre from the office to the manufacturing floorBInstall a longwave GBIC in the office SAN switch and string a singlemode fibre from the office to the manufacturing floorCInstall a shortwave GBIC in the office SAN switch and string a multimode fibre from the office to the manufacturing floorDInstall a shortwave GBIC in the office SAN switch and string a singlemode fibre from the office to the manufacturing floor

单选题A user explains that after the office was vacuumed the previous night their sound is not working and they cannot get onto the network. The user has verified that all of the PC’s cables are plugged into their respective ports. Which of the following is the MOST likely cause?()AFrayed or broken cablesBUPS is unpluggedCNIC and sound card are disabled in Device ManagerDSpeakers are muted