单选题An administrator has just installed a new NIC into the server. The system POSTs fine and the NIC is recognized by the OS, but it does not receive an IP address. Which of the following is the MOST likely cause of this?()AThe NIC is not on the HCL.BThe driver is incorrect on the server.CThe patch cable has not been seated properly.DThe NIC is not seated properly.

单选题
An administrator has just installed a new NIC into the server. The system POSTs fine and the NIC is recognized by the OS, but it does not receive an IP address. Which of the following is the MOST likely cause of this?()
A

The NIC is not on the HCL.

B

The driver is incorrect on the server.

C

The patch cable has not been seated properly.

D

The NIC is not seated properly.


参考解析

解析: 暂无解析

相关考题:

The network administrator has just finished installing a new 10/100/1000 switch, but receives reports from the server administrator that servers connected to the new switch seem to be experiencing slow LAN connections. The network administrator checks the port connecting the new switch to the core switch and sees the following information:Which of the following is the MOST likely cause of the slow connections?()A. The servers have not had VLAN tagging enabled on their NICs.B. Speed and duplex have not been set.C. VLAN tagging was not set on the trunk.D. The servers have been connected with CAT5 cable.

A technician has just finished installing a new NIC into a customer’s desktop. Which of thefollowing should the technician do NEXT?() A. Perform a full system backup.B. Follow up with the customer, verifying satisfaction.C. Ask their manager to contact the customer.D. Perform a complimentary virus scan.

An administrator has just installed a new NIC into the server. The system POSTs fine and the NIC is recognized by the OS, but it does not receive an IP address. Which of the following is the MOST likely cause of this?()A. The NIC is not on the HCL.B. The driver is incorrect on the server.C. The patch cable has not been seated properly.D. The NIC is not seated properly.

The technician has suspicions that a browser has been hijacked. Which of the following should the technician look for in this situation?()A、A new default gateway has been setup.B、A new Internet shortcut has been added.C、A new web browser has been installed and is now the default.D、A proxy server has been enabled.

An administrator just installed a new RAID controller card into a server. The firmware is current for the controller card. When the server is powered up the administrator notices that the RAID controller card is not recognized during POST. Which of the following is the cause of the problem?()A、The hard drives were not plugged into the server correctly.B、The controller driver is outdated and needs to be updated from the OEMs website.C、The firmware for the server is too old and does not support the new RAID controller card.D、The cable from the controller to the hard drive backplane is not connected.

A technician has installed an additional NIC on a server. Which of the following can now be set up?()A、TeamingB、VLANsC、Port forwardingD、Full duplex

An administrator has just installed a new NIC into the server. The system POSTs fine and the NIC is recognized by the OS, but it does not receive an IP address. Which of the following is the MOST likely cause of this?()A、The NIC is not on the HCL.B、The driver is incorrect on the server.C、The patch cable has not been seated properly.D、The NIC is not seated properly.

A technician has just installed a new power supply into a desktop computer and now the computer will not turn on. Which of the following is the MOST likely cause?()A、The voltage selector switch on the power supply is set incorrectly.B、The 3.3v power line is connected to the wrong input on the motherboard.C、The new power supply voltage rating is too high.D、The 12v power cord is installed incorrectly.

A new server was installed for the purpose of monitoring network traffic. The network has been configured in such a way that all traffic will be mirrored out the port this server is connected to. When reviewing the network traffic logs on the server only traffic destined to the server is listed in the logs. Which of the following is preventing the server from seeing all network traffic?()A、NIC filtering is enabled.B、Port security is configured.C、NIC is not in promiscuous mode.D、NIC is in promiscuous mode.

The administrator has just installed a new memory module into the server. Now, the server is not showing the new memory. Which of the following should the administrator perform FIRST?()A、System rebootB、Reseat the memoryC、Install the latest firmwareD、Install the latest driver

An administrator has just installed a web server for the companys Internet site. After bringing the system online, customers notify the administrator that they cannot connect to the server. The administrator tests the web server from a workstation and can access the website. The customers continue to report issues.  Which of the following is the MOST likely reason for this?()A、 The servers firewall is misconfigured.B、 The server’s timeout feature is set incorrectly.C、 The web server was not installed properly.D、 The company firewall is misconfigured.

The server administrator has just brought a new Windows server online. Permissions are set, but the server administrator cannot connect remotely. Which of the following is MOST likely the problem?()A、WMI was not enabled.B、Server service was not enabled.C、RDP was not enabled.D、Workstation service was not enabled.

An administrator recently installed a new array controller into a server. When the server is running POST the controller does not appear as present. Which of the following could be the reason for this?()A、The server BIOS firmware is out-of-date.B、The server does not have the correct drivers.C、The server hard drives have not begun to spin.D、The server has too little memory installed.

A user has just moved a PC from one office to another. The patch cable and the NIC do notappear to be functioning in the new office but were working before the move. The patch cable is plugged in correctly to both the NIC and the wall jack. Which of the following actions should the technician take FIRST?()A、Verify that the network card is compatible with the operating system.B、Verify that the port on the switch is enabled.C、Update the network card driver.D、Replace the network cable with a crossover cable.

A technician has just installed an upgraded graphics card. The computers power turns off before itfinishes booting. Which of the following is the cause of the problem? ()A、The monitor cannot display the increased resolution that is a feature of the new graphics card.B、The power supply does not provide enough wattage to power the new graphics card.C、The new graphics card is incompatible with the existing processor.D、The computer does not have enough RAM to support the new graphics card.

A customer has just purchased six x346 servers running Windows 2003 Web Edition.They are expecting to add six additional x346’s in three months.They have a requirement to automatically deploy the current server image upon the new servers. What TWO actions are required to complete this task?()A、Ensure Director Agent is installed on the new servers.B、Ensure a DHCP Sever is installed and configured in the environment.C、Ensure Server Plus Pack option has been installed and configured.D、Ensure Software Distribution has been installed on the IBM Director Server and an image has been created.E、Ensure Remote Deployment Manager has been installed on the IBM Director Server and an image has been created.

A system administrator has just installed a new maintenance level, but "oslevel -r" does not show the correct maintenance level. What command can be used to determine which filesets are downlevel?()A、lppchkB、instfixC、fixdistD、maintlvl

A System p administrator has just installed a new technology level, but "oslevel -r" does not show the expected technology level.  Which of the following commands would determine which filesets are downlevel()A、lppchkB、instfixC、oslevelD、installp

An administrator just completed an AIX installation but suspects that not all filesets installed completely. Which of the following commands would verify that all filesets are completely installed?()A、installp -EB、lslpp -EC、lppchk -cD、instfix -c

As an administrator at Certkiller.com, you have installed an Active Directory forest that has a single domain. You have installed an Active Directory Federation services (AD FS) on the domain member server.  What should you do to configure AD FS to make sure that AD FS token contains information from the active directory domain()A、Add a new account store and configure it.B、Add a new resource partner and configure itC、Add a new resource store and configure itD、Add a new administrator account on AD FS and configure itE、None of the above

单选题A system administrator just completed an AIX installation but suspects that not all filesets installed completely. Which command should be run to verify that all filesets are completely installed?()AinstallpBlslppClppchkDoslevel

单选题A technician has just finished installing a new NIC into a customer’s desktop. Which of thefollowing should the technician do NEXT?()APerform a full system backup.BFollow up with the customer, verifying satisfaction.CAsk their manager to contact the customer.DPerform a complimentary virus scan.

单选题An administrator wants to rackmount a new server.  Power and network outlets are available and cooling in the room is adequate to support the additional server. The new server is identical to the other servers already installed.  Which of the following items should the administrator FIRST verify before installing the server?()AHBA is compatible with the SAN fiber switch.BUpdate the newly installed server with the latest KVM drivers.CThe UPS will continue to perform as expected with the additional load.DVerify the server NIC is compatible with the NAS.

单选题A new server was installed for the purpose of monitoring network traffic. The network has been configured in such a way that all traffic will be mirrored out the port this server is connected to. When reviewing the network traffic logs on the server only traffic destined to the server is listed in the logs. Which of the following is preventing the server from seeing all network traffic? ()A NIC filtering is enabled.B Port security is configured.C NIC is not in promiscuous mode.D NIC is in promiscuous mode.

单选题An administrator has just installed a web server for the company's Internet site. After bringing the system online, customers notify the administrator that they cannot connect to the server. The administrator tests the web server from a workstation and can access the website. The customers continue to report issues. Which of the following is the MOST likely reason for this?()AThe server's firewall is misconfigured.BThe server's timeout feature is set incorrectly.CThe web server was not installed properly.DThe company firewall is misconfigured.

单选题A technician has just installed a new power supply into a desktop computer and now the computer will not turn on. Which of the following is the MOST likely cause?()AThe voltage selector switch on the power supply is set incorrectly.BThe 3.3v power line is connected to the wrong input on the motherboard.CThe new power supply voltage rating is too high.DThe 12v power cord is installed incorrectly.

单选题An administrator recently installed a new array controller into a server. When the server is running POST the controller does not appear as present.  Which of the following could be the reason for this?()A The server BIOS firmware is out-of-date.B The server does not have the correct drivers.C The server hard drives have not begun to spin.D The server has too little memory installed.

单选题An administrator has just installed a new NIC into the server. The system POSTs fine and the NIC is recognized by the OS, but it does not receive an IP address. Which of the following is the MOST likely cause of this?()AThe NIC is not on the HCL.BThe driver is incorrect on the server.CThe patch cable has not been seated properly.DThe NIC is not seated properly.