单选题The conventions under which the port state control inspection is carried out include all the following except （）.ASOLAS 74BMARPOL 73/78CSTCW 78/95DISM Code
单选题
The conventions under which the port state control inspection is carried out include all the following except （）.
A
SOLAS 74
B
MARPOL 73/78
C
STCW 78/95
D
ISM Code
参考解析
解析：
暂无解析
相关考题：
Which statement is True?A.The Port State Control Officer has no right to check a SSPB.The Master has the right to refuse the request from a Port State Control Officer to check the confidential part of the SSP on boardC.The Confidential part of a SSP can never be subject to non-flag StateD.Even the flag State has no right to check the SSP thoroughly
Which port state is introduced by Rapid－PVST?() A. learningB. listeningC. discardingD. forwarding
Drunk driving,which was once a occurrence , is now under control.A.generalB.frepuentC.normalD.particular
材料：Port State Control (PSC) is the inspection of foreign ships in national ports for the purpose of verifying that the condition of the ship and its equipment comply with the requirements of international conventions and that the ship is manned and operated in compliance with applicable international laws. The primary responsibility for ensuring that a ship maintains a standard at least equivalent to that specified in international conventions rests with the flag State and if all flag States performed their duties satisfactorily there would be no need for port State control. Unfortunately this is not the case as evidenced by the many marine accidents around the world - hence the need for additional control.The authority for exercising PSC is the national law based on relevant conventions. It is therefore necessary for a port State to be Party to those conventions and to have promulgated the necessary legislation before exercising PSC.In accordance with the provisions of the applicable conventions, Parties may conduct inspections of foreign ships in their ports through Port State Control Officers (PSCOs).问题：The purpose of PSC is ______.① to check and inspect foreign ships② to verify the condition of a ship in compliance with requirements of international conventions;③ to make sure that the ship is manned and operated well;④to detain shipsA.①②B.②③C.①③D.①②③④Who will be responsible for ensuring that a ship maintains a standard at least equivalent to that specified in international conventions?A.PSCOsB.Ship ownersC.Flag statesD.Port statesBefore exercising PSC, a port state should______.A.become a contracting Party and promulgate regulations for implementing PSCB.inform ship ownersC.establish proceduresD.inform shipping companiesPSC inspection is implemented by______ through______.A.flag states/PSCOsB.flag states/ship ownersC.port states/PSCOsD.port states/ship owners请帮忙给出每个问题的正确答案和分析，谢谢！
The port State control officer or the surveyor authorized by the port State Administration must be aware that ______ may be carried on product carriers．A.category A substancesB.crude oilC.certain“oil like”noxious liquid substancesD.category B，C and D substances
Drunk driving,which was once a__________occurrence,is now under control.A.generalB.frequentC.normalD.particular
Which three flow-control port states lead to enabled link flow control？ （）A、 Receive port： Enabled， Transmit port： EnabledB、 Receive port： Enabled， Transmit port： DesiredC、 Receive port： Enabled， Transmit port： DisabledD、 Receive port： Disabled， Transmit port： DesiredE、 Receive port： Desired， Transmit port： Desired
Which of the following will generate an RSTP topology change notification？（）A、 an edge port that transitions to the forwarding stateB、 a non-edge port that transitions to the blocking stateC、 a non-edge port that transitions to the forwarding stateD、 an edge port that transitions to the blocking stateE、 any port that transitions to the blocking stateF、 any port that transitions to the forwarding state
Which of the following allows verification of the port that a printer is currently using?（）A、The print queue window from system trayB、Properties of the printer from the Printers Control PanelC、Print spooler view in the Printers Control PanelD、Properties of the port within Device Manager
Which of the following characteristics describe the Root Guard feature？（Choose all that apply.）（）A、The port must be put into forwarding state manually after root-inconsistent state has beencorrectedB、A Root Guard port receiving superior BPDU goes into a root-inconsistent stateC、A Root Guard port receiving inferior BPDU goes into a root-inconsistent stateD、While the port is in a root-inconsistent state no user data is sent across that portE、The port returns to a forwarding state if inferior BPDUs stopF、It should be applied to all switch ports
Under which two circumstances would an RSTP bridge flush its CAM table？（）A、upon a port state changeB、upon receiving a topology change notificationC、when transitioning from discarding to forwardingD、when transitioning from forwarding to discardingE、only when changing from listening to discardingF、when CAM resources have been completely used up
Which statement is correct about RSTP port roles？（）A、The designated port is the switch port on every nonroot bridge that is the chosen path to theroot bridge. There can be only one designated port on every switch. The designated portassumes the forwarding state in a stable active topology. All switches connected to a given segment listen to all BPDUs and determine the switch that will be the root switch for a particular segment.B、The disabled port is an additional switch port on the designated switch with a redundant link to the segment for which the switch is designated. A disabled port has a higher port ID than the disabled port on the designated switch. The disabled port assumes the discarding state in astable active topology.C、The backup port is a switch port that offers an alternate path toward the root bridge. The backup port assumes a discarding state in a stable， active topology. The backup port will be present on nondesignated switches and will make a transition to a designated port if the current designated path fails.D、The root port is the switch port on every nonroot bridge that is the chosen path to the root bridge. There can be only one root port on every switch. The root port assumes the forwarding state in a stable active topology.
单选题Under the provisions of applicable international conventions, the officers to conduct port state control inspection must be duly authorized by （）.Athe companyBthe Government of the countryCthe organization recognized by the AdministrationDthe IMO
单选题Which Cisco IOS command globally enables port-based authentication on a switch？ （）Aaaa port-auth enableBradius port-control enableCdot1x system-auth-controlDswitchport aaa-control enable
单选题The port State control officer may ensure that（）are exhibited in conspicuous places throughout the ship.Asurvey planning documentBmuster listsCbulk carrier bookletDbulk carrier loading triangle
单选题The port State control officer or the surveyor authorized by the port State Administration must be aware that（）may be carried on product carriers.Acategory A substancesBcrude oilCcertain“oil like”noxious liquid substancesDcategory B,C and D substances
单选题Which of the following allows verification of the port that a printer is currently using?（）AThe print queue window from system trayBProperties of the printer from the Printers Control PanelCPrint spooler view in the Printers Control PanelDProperties of the port within Device Manager
单选题If a port configured with STP loop guard stops receiving BPDUs，the port will be put into which state？（）Alearning stateBlistening stateCforwarding stateDroot-inconsistent state
单选题Which statement is correct about RSTP port roles？（）AThe designated port is the switch port on every nonroot bridge that is the chosen path to theroot bridge. There can be only one designated port on every switch. The designated portassumes the forwarding state in a stable active topology. All switches connected to a given segment listen to all BPDUs and determine the switch that will be the root switch for a particular segment.BThe disabled port is an additional switch port on the designated switch with a redundant link to the segment for which the switch is designated. A disabled port has a higher port ID than the disabled port on the designated switch. The disabled port assumes the discarding state in astable active topology.CThe backup port is a switch port that offers an alternate path toward the root bridge. The backup port assumes a discarding state in a stable， active topology. The backup port will be present on nondesignated switches and will make a transition to a designated port if the current designated path fails.DThe root port is the switch port on every nonroot bridge that is the chosen path to the root bridge. There can be only one root port on every switch. The root port assumes the forwarding state in a stable active topology.
多选题Under which two circumstances would an RSTP bridge flush its CAM table？（）Aupon a port state changeBupon receiving a topology change notificationCwhen transitioning from discarding to forwardingDwhen transitioning from forwarding to discardingEonly when changing from listening to discardingFwhen CAM resources have been completely used up
多选题Which of the following characteristics describe the Root Guard feature？（Choose all that apply.）（）AThe port must be put into forwarding state manually after root-inconsistent state has beencorrectedBA Root Guard port receiving superior BPDU goes into a root-inconsistent stateCA Root Guard port receiving inferior BPDU goes into a root-inconsistent stateDWhile the port is in a root-inconsistent state no user data is sent across that portEThe port returns to a forwarding state if inferior BPDUs stopFIt should be applied to all switch ports
多选题Which three flow-control port states lead to enabled link flow control？ （）AReceive port： Enabled， Transmit port： EnabledBReceive port： Enabled， Transmit port： DesiredCReceive port： Enabled， Transmit port： DisabledDReceive port： Disabled， Transmit port： DesiredEReceive port： Desired， Transmit port： Desired
单选题The port state control inspection is carried out on the basis of the following international conventionsAmong them, which one was not set by IMO?（）ALL66BITC69CILO No147DSOLAS 74
单选题The main purpose of port State control is not to（）Aprevent an unsafe ship proceeding to seaBprevent a ship threatening the marine environmentCfine the shipsDconfirm a safe sailing
单选题Under the provisions of applicable international conventions, ships entitled to fly the flag of a Party are subject, while in the port of a Party, to control by officers duly authorized by the Party Ships of non-parties or below convention size shall be given （）.Amore favorable treatmentBless favorable treatmentCno more favorable treatmentDthe most favorable treatment