单选题A technician purchases a new 120 GB IDE hard disk to use in an old server as a swap drive. After adding the drive to the server， the technician discovers that the operating system does not detect the drive. After rebooting the server， the technician notices the drive is missing from POST and comes to the conclusion that the BIOS needs to be updated. The technician downloads the latest version of the BIOS update from the manufacturer website. Which action should the technician take next？（）A backup the BIOS configuration to use laterB install the BIOS update from a command promptC create a bootable floppy and copy the BIOS update tools to the floppyD read the manufacturer’s guidelines and recommendations on installing the update
单选题
A technician purchases a new 120 GB IDE hard disk to use in an old server as a swap drive. After adding the drive to the server， the technician discovers that the operating system does not detect the drive. After rebooting the server， the technician notices the drive is missing from POST and comes to the conclusion that the BIOS needs to be updated. The technician downloads the latest version of the BIOS update from the manufacturer website. Which action should the technician take next？（）
A
backup the BIOS configuration to use later
B
install the BIOS update from a command prompt
C
create a bootable floppy and copy the BIOS update tools to the floppy
D
read the manufacturer’s guidelines and recommendations on installing the update
参考解析
解析：
暂无解析
相关考题：
After installing a new hard drive into a server for the purpose of mirroring the data from the first drive to the second one， the server displays an “operating system not found” error. Which of the following should the technician do to boot the server from the original drive？（）A、Replace the second drive with a hot swappable one.B、Swap the drive boot order in the BIOSC、Make the second disk active under the disk management tool.D、Rebuild the array using the hardware RAID tool at boot.
A network technician arrives to work and discovers users are having a problem connecting the company server. The server operator was working on upgrades the night before. Which of the following documents should the technician use to attempt to discover the problem?（）A、Network mapsB、Change managementC、BaselinesD、Cable management
A technician has just finished installing a new server into a server rack. Which of the following should the technician do NEXT to complete the installation documentation？（）A、Update drivers， update operating system （e.g. Windows Update）， create server baseline， createa new network diagram， update change management proceduresB、Create server baseline， label server， store vendor-specific documentation， update networkdiagrams， update asset tracking informationC、Create server baseline， assign server roles， install tape drive， delete network diagram， labelserver， update operating system （e.g. Windows Update）D、Install applications on server， install external drives， toss vendor-specific documentation，update network diagrams
A technician purchases a new 120 GB IDE hard disk to use in an old server as a swap drive. After adding the drive to the server， the technician discovers that the operating system does not detect the drive. After rebooting the server， the technician notices the drive is missing from POST and comes to the conclusion that the BIOS needs to be updated. The technician downloads the latest version of the BIOS update from the manufacturer website. Which action should the technician take next？（）A、 backup the BIOS configuration to use laterB、 install the BIOS update from a command promptC、 create a bootable floppy and copy the BIOS update tools to the floppyD、 read the manufacturer’s guidelines and recommendations on installing the update
A technician wants to compare a new server performance over a period of time. Which of the following should the technician do FIRST?（）A、Monitor processor performance logsB、Constantly check the task managerC、Use performance server logsD、Establish a baseline for the server
A technician manages a server that contains sensitive data. The server currently has two hard drives， one hosting the operating system and other generic files and the second hosting sensitive data. The technician needs to implement a technology that would guard against data loss for only the sensitive data， while adding only one additional hard drive. Which of the following should the technician implement to avoid reformatting any drives？（）A、RAID 0B、RAID 1C、RAID 3D、RAID 5
After installing a new SATA hard drive the technician notices the drive is hot to the touch and is giving off a slight odor. Which of the following should the technician do? （）A、Install a larger fan near the hard drive to cool the system.B、Clean the drive with compressed air and continue to use it.C、Remove and replace the drive.D、Apply more thermal compound and reseat the drive.
A technician is working on a new computer running Windows XP and the hard drive is formatted at 20GB but is an 80GB hard drive. There is not another partition and no extra space can be foundunder Windows explorer. Which of the following would be the BEST way to partition the remainder of the hard drive without data loss？ （）A、Add another hard drive and use that available space.B、Run FDISK.C、Use the Disk Management tool.D、Back up all important data to an external drive then reformat the hard drive.
A server technician has been attempting to install an operating system on the company test server for several days. The technician has experienced error messages at several points of theinstallation and the system has frozen during various parts of the boot process. The technician has replaced the power supply， graphics card and installation disk with known good components.Which of the following could be causing these issues？（）A、Storage driver not loadedB、Fragmented hard driveC、Damaged or faulty NIC chipsetD、Damaged or faulty system boardE、Memory incompatible with the processorF、Missing voltage regulator
Two new servers are purchased and need to be installed to allow sharing of a single external hard drive enclosure. One server is configured as a local file server， and the other as a database server for a different network. The onsite technician notices that when both servers are running at the same time， they each receive SCSI errors. When they are running individually， no errors are reported. Which of the following is the BEST source of information to use for troubleshooting this problem？（）A、 the server vendor’s FAQ websiteB、 the SCSI controller vendor’s user manualC、 the drive enclosure vendor’s user manualD、 the network operating system vendor’s website
Bob, a technician, is adding a secondary IDE hard drive to an older system. After installation and the first boot, the drive is not showing in Disk Management. Which of the following is the MOST likely cause of the issue?（）A、The new drive’s jumper is set for master.B、The new drive is connected to the secondary bus as a slave drive.C、Both drives’ jumpers are set for cable select.D、The old drive’s jumper is set for master and the new drive is set for slave.
The technician is working on a system and has determined that the hard drive must be reimaged. However, the customer wants to retain all the data. Which of the following would take the LEAST amount of time to implement?（）A、Create a new partition on the hard drive, copy all data to the new partition, reimage the drive, and the old data will be on the new partition and accessible.B、Install a new hard drive, slave the old drive, image the new drive, and show the customer how to access their data on the old drive.C、Upload the data to an external FTP server, reimage the drive, and then restore the data to the newly imaged drive.D、Copy data to a USB connected hard drive, reimage the drive, and then restore the data to the newly imaged drive.
A client asks a technician to add a DVD+R burner to a computer system. The technician does this and successfully tests the drive. Three weeks later， the client calls and says that the burner is no longer working. The technician learns that the drive reads CDs and DVDs， but will no longer burn DVDs. When arriving on site， what is the FIRST action that the technician should take？（）A、check for a faulty IDE cableB、be sure that the DVD+R is formatted before using itC、check for incompatible mediaD、re-install the DVD burning software
多选题A server technician has been attempting to install an operating system on the company test server for several days. The technician has experienced error messages at several points of theinstallation and the system has frozen during various parts of the boot process. The technician has replaced the power supply， graphics card and installation disk with known good components.Which of the following could be causing these issues？（）AStorage driver not loadedBFragmented hard driveCDamaged or faulty NIC chipsetDDamaged or faulty system boardEMemory incompatible with the processorFMissing voltage regulator
单选题Two new servers are purchased and need to be installed to allow sharing of a single external hard drive enclosure. One server is configured as a local file server， and the other as a database server for a different network. The onsite technician notices that when both servers are running at the same time， they each receive SCSI errors. When they are running individually， no errors are reported. Which of the following is the BEST source of information to use for troubleshooting this problem？（）A the server vendor’s FAQ websiteB the SCSI controller vendor’s user manualC the drive enclosure vendor’s user manualD the network operating system vendor’s website
单选题A technician has just finished installing a new server into a server rack. Which of the following should the technician do NEXT to complete the installation documentation？（）AUpdate drivers， update operating system （e.g. Windows Update）， create server baseline， createa new network diagram， update change management proceduresBCreate server baseline， label server， store vendor-specific documentation， update networkdiagrams， update asset tracking informationCCreate server baseline， assign server roles， install tape drive， delete network diagram， labelserver， update operating system （e.g. Windows Update）DInstall applications on server， install external drives， toss vendor-specific documentation，update network diagrams
单选题Bob, a technician, is adding a secondary IDE hard drive to an older system. After installation and the first boot, the drive is not showing in Disk Management. Which of the following is the MOST likely cause of the issue?（）AThe new drive’s jumper is set for master.BThe new drive is connected to the secondary bus as a slave drive.CBoth drives’ jumpers are set for cable select.DThe old drive’s jumper is set for master and the new drive is set for slave.
单选题After installing a new SATA hard drive the technician notices the drive is hot to the touch and is giving off a slight odor. Which of the following should the technician do? （）AInstall a larger fan near the hard drive to cool the system.BClean the drive with compressed air and continue to use it.CRemove and replace the drive.DApply more thermal compound and reseat the drive.
单选题After installing a new hard drive into a server for the purpose of mirroring the data from the first drive to the second one， the server displays an “operating system not found” error. Which of the following should the technician do to boot the server from the original drive？（）AReplace the second drive with a hot swappable one.BSwap the drive boot order in the BIOSCMake the second disk active under the disk management tool.DRebuild the array using the hardware RAID tool at boot.
单选题A technician manages a server that contains sensitive data. The server currently has two hard drives， one hosting the operating system and other generic files and the second hosting sensitive data. The technician needs to implement a technology that would guard against data loss for only the sensitive data， while adding only one additional hard drive. Which of the following should the technician implement to avoid reformatting any drives？（）ARAID 0BRAID 1CRAID 3DRAID 5
单选题A technician is working on a new computer running Windows XP and the hard drive is formatted at 20GB but is an 80GB hard drive. There is not another partition and no extra space can be foundunder Windows explorer. Which of the following would be the BEST way to partition the remainder of the hard drive without data loss？ （）AAdd another hard drive and use that available space.BRun FDISK.CUse the Disk Management tool.DBack up all important data to an external drive then reformat the hard drive.
单选题A client asks a technician to add a DVD+R burner to a computer system. The technician does this and successfully tests the drive. Three weeks later， the client calls and says that the burner is no longer working. The technician learns that the drive reads CDs and DVDs， but will no longer burn DVDs. When arriving on site， what is the FIRST action that the technician should take？（）Acheck for a faulty IDE cableBbe sure that the DVD+R is formatted before using itCcheck for incompatible mediaDre-install the DVD burning software
单选题A technician is troubleshooting a CD/DVD drive. There is a disk in the drive and the tray wont eject. Which of the following actions should the technician take FIRST？ （）AShutdown， restart and verify that the BIOS recognizes the drive and try again.BReplace the CD/DVD drive.CPry the tray open with a small， flat head screwdriver.DPlace the end of a paper clip in the emergency eject pinhole on the CD/DVD drive.
单选题A network technician arrives to work and discovers users are having a problem connecting the company server. The server operator was working on upgrades the night before. Which of the following documents should the technician use to attempt to discover the problem?（）ANetwork mapsBChange managementCBaselinesDCable management
多选题A technician wants to secure a Windows 7 Ultimate notebook hard drive. Which of the following should the technician do to implement BitLocker?（） (Select TWO).ADisable TPM in the system BIOSBRun the BitLocker wizard and any necessary partitionsCEnable TPM in the system BIOSDEnable TPM in the Windows 7 OS filesESet up the OS and the system files on the same partition
单选题The technician is working on a system and has determined that the hard drive must be reimaged. However, the customer wants to retain all the data. Which of the following would take the LEAST amount of time to implement?（）ACreate a new partition on the hard drive, copy all data to the new partition, reimage the drive, and the old data will be on the new partition and accessible.BInstall a new hard drive, slave the old drive, image the new drive, and show the customer how to access their data on the old drive.CUpload the data to an external FTP server, reimage the drive, and then restore the data to the newly imaged drive.DCopy data to a USB connected hard drive, reimage the drive, and then restore the data to the newly imaged drive.
单选题A technician notices that there is a second partition on the primary hard drive. This partitionis notassigned a drive letter and is not accessible from Windows. Which of the following is the MOST likely explanation for this extra partition?（）ASpace reserved by the drive manufacturer for firmware.BSpace set aside by Windows for use by the virtual memory swap file.CA potentially dangerous virus has been downloaded onto the system.DA recovery partition put there by the manufacturer.