单选题As the administrator of your Windows 2000 corporate network you need to install Windows 2000 Professional on 88 computers, and you would like to do it with the least amount of administrative effort. You have 38 PXE-Compliant computers and 50 NON PXE-Compliant computers ready to go. You confirm that all 88 computers and their hardware are included on the current Windows 2000 hardware compatibility list (HCL).You create an RIS image and load it onto a Windows 2000 RIS Server. You then start the 88 computers. You find that the 38 PXE-Compliant computers connect fine to the RIS server, however the 50 NON PXE-Compliant computers cannot connect to the RIS server. What should you do to resolve this problem?（）ARun RBFG*EXE to create a Non-PXE-compliant startup disk.BRun RIPREP.*XE to create a non - PXE complaint startup disk.CGrant the ‘Everyone’ group NTFS Read permission for the RIS image.DGrant the Administrators group NTFS Read permission for the RIS image.
单选题
As the administrator of your Windows 2000 corporate network you need to install Windows 2000 Professional on 88 computers, and you would like to do it with the least amount of administrative effort. You have 38 PXE-Compliant computers and 50 NON PXE-Compliant computers ready to go. You confirm that all 88 computers and their hardware are included on the current Windows 2000 hardware compatibility list (HCL).You create an RIS image and load it onto a Windows 2000 RIS Server. You then start the 88 computers. You find that the 38 PXE-Compliant computers connect fine to the RIS server, however the 50 NON PXE-Compliant computers cannot connect to the RIS server. What should you do to resolve this problem?（）
A
Run RBFG*EXE to create a Non-PXE-compliant startup disk.
B
Run RIPREP.*XE to create a non - PXE complaint startup disk.
C
Grant the ‘Everyone’ group NTFS Read permission for the RIS image.
D
Grant the Administrators group NTFS Read permission for the RIS image.
参考解析
解析：
RBFG.exe （Remote boot floppy generator） is used to create a non PXE-compliant computer startup disk which is then used to connect the non PXE-compliant computers to RIS server. RIPREP.exe is used to create a RIS image for installation on the RIS server. Other choices are incorrect because it is a problem of connectivity to the RIS server not a problem of permissions assignment to the RIS image.
相关考题：
You are the administrator of your company's network. Your network has five Windows 2000 server computers and 75 Windows 2000 Professional computers. The Windows 2000 Professional computers were installed by using a RIS image on one of the Windows 2000 Server computers. You need to upgrade several applications on the Windows 2000 Professional computers. The applications do not have built-in support for scripted installations.You want to accomplish the following goals:1. An unattended installation of the upgraded applications will be performed on the Windows 2000 Professional computers.2. Existing user environments will be maintained on the Windows 2000 Professional computers.3. The network name of each Windows 2000 Professional computer will be changed to match its asset tag.4. The RIS image and the upgraded applications will be enabled as they are added to the network.You take the following actions:1. Install the RIS image on a Windows 2000 Professional computer named Computer1.2. Install the upgraded applications on Computers1.3. Change the network name of Computer1 to %DMI-SERIAL_NUM%.4. Run RIPrep.exe on Computer1 to load the RIS image on to the RIS server.5. Start all of the Windows 2000 Professional computers, and then load the RIS image from the RIS server.Which result or results do these actions produce? (Choose all that apply.)A．An unattended installation of the upgraded applications will be performed on the Windows 2000 Professional computers.B．Existing user environments will be maintained on the Windows 2000 Professional computers.C．The network name of each Windows 2000 Professional computer will be changed to match its asset tag.D．The RIS image and the upgraded applications will be enabled as they are added to the network.
You are the administrator of your company's network. The network is configured as shown in the exhibit.You want to install Windows 2000 Professional on 10 non-PXE-compliant computers that are on the marketing segment of your network. You start one of the computers by using a RIS boot disk. However, you cannot connect to the RIS server.You verify that the existing client computers on the network can connect to network servers, including the RIS server. The network router does not support BOOTP, so existing client computers use manually configured TCP/IP addresses. You want to enable the computers to connect to the RIS server.What should you do?A．Add a computer running DHCP Relay Agent to the marketing segment.B．Add a computer running the network monitor driver to the marketing segment.C．Move the Windows 2000 Server computer running WINS to the marketing segment.D．Move the Windows 2000 Server computer running Active Directory to the marketing segment.
You are an administrator of Ezonexam.com's network. You want to perform. routine upgrades on your Windows 2000 Server computer. You use your non-administrator user account in the domain to logon to the server.You want to upgrade all of the critical system files and patches on the server in the shortest possible time.What should you do?A．Use Windows Update.B．Run System File Checker.C．Log on as administrator and run Windows Update.D．Log on as administrator and run System File Checker.
You are the administrator for Ezonexam's network.Your network includes Windows 2000 Professional client computers, Windows 2000 Server computers, Windows XP Professional computers, and UNIX client computers. Users of the UNIX operating system send print jobs to shared printers on a UNIX computer named PrintServ.You want to make the shared printers on PrintServ available to the Windows 2000 Professional computers, the Windows 2000 Server computers and the Windows XP Professional computers.What should you do?A．Use the SRVANY utility from the Windows NT Resource Kit to run the LPR program as a service.B．Configure each of the printers to support TCP/IP printing.C．Create an LPR port on each client that is configured to use PrintServ.D．Configure each of the printers to use LPR port
You are a network administrator for Ezonexam.com's Windows 2000 network.Your network has 200 Windows 2000 Professional computers and 15 Windows 2000 Server computers.Users on the network save their work files in home folders on a network server. The NTFS partition that contains the home folders has Encrypting File System (EFS) enabled. A user named Jack Bauer leaves the company. You grant her manager the Full Control NTFS permission to Jack's home folder. When the manager attempts to open any of the files, she receives the following error message: "Access is denied."What should you do?A．Use System File Checker (SFC) to decrypt the file.B．Log on the network as the Recovery Agent. Decrypt the files for the manager.C．Log on the network as the administrator. Use the cipher command to decrypt the files.D．Log on the network as a member of the Backup Operators group. Decrypt the files for the manager.
You are the administrator for Ezonexam.com's network.Your network includes Windows 2000 Professional client computers, Windows NT Workstation 4.0 client computers, Windows 98 client computers, and UNIX client computers. Users of the Windows operating systems store files on shared folders on a Windows 2000 Server computer named FileServ.You want to make the shared folders on FileServ available to the UNIX computers.What should you do?A．Install and configure Network File System (NFS) on FileServ.B．Configure data volumes on FileServ to be FAT volumes.C．Disable Server Message Block (SMB) signing on FileServ.D．Install Simple TCP/IP Services on FileServ.
Your network consists of a single Active Directory domain. The functional level of the domain is Windows Server 2008 R2. All servers run Windows Server 2008 R2. A corporate security policy requires complex passwords for user accounts that have administrator privileges. You need to design a strategy that meets the following requirements： èEnsures that administrators use complex passwords èMinimizes the number of servers required to support the solution What should you include in your design？（）A、Implement Network Access Protection （NAP）.B、Implement Active Directory Rights Management Services （AD RMS）.C、Create a new Password Settings Object （PSO） for administrator accounts.D、Create a new child domain in the forest. Move all non-administrator accounts to the new domain.Configure a complex password policy in the root domain.
As the administrator of your company’s network， you have implemented encryption for extra security of data on your network. A user moves an encrypted file from an NTFS partition on her Windows 2000 Workstation to an NTFS folder on a remote Windows 2000 Server. What effect will this have on the encrypted file？（）A、The encrypted file will automatically be decrypted.B、Encrypted files and folders cannot be moved or copied， decrypt it first then move or copy thefile or folder.C、The encrypted file will remain encrypted in the Windows 2000 folder.D、The encrypted file will inherit the encryption state of the remote NTFS folder.
You are the administrator of B G Enterprises. Your Windows 2000 Server is configured to use the NWLink IPX/SPX compatible protocol. Your network clients also use NWLink IPX/SPX protocol. Your clients complain that they are not able to connect to the Windows 2000 Server； they can however connect to each other. What is the most likely cause of the problem？ （）A、The SUBNET Mask was set incorrectly.B、File permissions were set to no access.C、An incorrect frame type was selected on the server.D、The workstation service on the Windows 2000 Server failed to start.
You are the administrator of WXYZ.com Incorporation. Your company’s network consists of Windows 2000 Professional clients and Windows 2000 Servers. Users have started reporting that the network performance has degraded in recent times. Most of the Windows 2000 Professional clients on your network use the TCP/IP protocol to communicate with the Server. You want to increase network performance. Where do you change the binding order？（）A、Windows 2000 Server Network Binding Server TCP/IP on the top.B、Windows 2000 Server Network Binding Workstation TCP/IP on the top.C、Windows 2000 Professional Network Binding Server TCP/IP on the top.D、Windows 2000 Professional Network Binding Server TCP/IP on the bottom.E、Windows 2000 Professional Network Binding Workstation TCP/IP on the top.F、Windows 2000 Professional Network Binding Workstation TCP/IP on thebottom.
You are the network administrator for ExamSheet.net. You install Windows 2000 Professional on your portable computer. You use a docking station for your portable computer when you are in the office. You install a ISA-based network adapter in your docking station. You insert your computer into the docking station and start the computer. The network adapter is not detected during the startup process. You obtain a disk that contains the supported driver from the network adapter manufacturer. You want to allow Windows 2000 Professional to use the network adapter. What should you do?（）A、Restart the computer in the docking station.B、Run the Add/Remove Hardware wizard.C、Use Device Manager to scan for hardware changes.D、Copy the network adapter driver to the Winnt/Driver Cache/i386 folder.E、Install the new network adapter driver.
Your network administrator has assigned you an IP address of 192.168.0.20 with subnet mask of 255.255.255.0.Your network is running in pure Windows 2000 domain. What else should know in order to join your computer to the Windows 2000 domain. （）A、 Address of DHCP server.B、 Address of WINS server.C、 Address of DNS server.D、 Address of default gateway
Most of the Windows 2000 Professional clients on your network use the TCP/IP Protocol to communicate with Server. You want to increase network performance. Where do you change the binding order of your protocols？ （）A、On the Windows 2000 Server， set TCP/IP for the Server service at the top.B、On the Windows 2000 Professional computers， set TCP/IP for the Workstation service at the top.C、On the Windows 2000 Server， set TCP/IP for the Workstation service at the top.D、On the Windows 2000 Professional computers， set TCP/IP for the Server service at the top.
You are a network administrator for ExamSheet.net's Windows 2000 network. Your computer is installed with Windows 2000 Professional. You schedule a task that will copy files from your computer to another computer on the network. You notice that the task is not completing correctly. You manually copy the files from your computer to other computers on the network without any errors. You verify that all of your other tasks are working correctly. You want the task to complete successfully. What should you do? （）A、Start the Remote Procedure Call （RPC） Locater service and configure the service to start automatically.B、Start the RunAs service and configure the service to start automatically.C、Configure the Task Scheduler service account to use the local Administrator account and password. Restart the service.D、Use Scheduled Tasks to configure the task to run under the security context of your account.
You are the network administrator for ExamSheet. Computers on your network run Windows 2000 Professional, Windows NT Workstation 4.0 and Windows 98. Ten Windows 2000 Professional computers are located in the research department. These computers contain highly confidential information. You want the 10 Windows 2000 Professional computers to be able to communicate only with other Windows 2000 computers. What should you do?（）A、On the research computers use the Local Computer Policy to disable theAccess this computer from the networkoption.B、Use Security Configuration and Analysis to apply the Highly Secure security template to the research computers.C、Add the users of the research computers to the Power Users group on each computer.D、On the research computers configure the security settings to prevent anonymous access.
You are the administrator of a small network supporting Windows NT 4.0 computers. You configure a setup script to automatically upgrade Windows NT Workstation 4.0 computers to Windows 2000 Professional. When you attempt to test the process on a single computer， you receive this error message： "The specified Setup script file （path：/unattend.txt） is inaccessible or invalid. Contact your system administrator." Which action will most likely resolve this error？ （）A、Add the UnattendedInstall="Yes" parameter to the [Unattended] section of your Unattend.txt fileB、Add the UnattendMode=FullUnattended parameter to the [Data] section of your Unattend.txt fileC、Add the UnattendedInstall="Yes" parameter to the [GuiUnattended] section of your Unattend.txt fileD、Add the UnattendMode=FullUnattended parameter to the [Unattended] section of your Unattend.txt file
You are an administrator for a corporate network. At a branch office，you want to deploy Windows Vista to21 client computers and Windows Server 2008 to four servers. For which operating systems is the branchoffice eligible for KMS licensing？（）A、Windows VistaB、Windows Server 2008C、Both Windows Vista and Windows Server 2008D、Neither Windows Vista nor Windows Server 2008
You are the network administrator for ExamSheet.net. You administer ExamSheet's Windows 2000 network. You want to update the device driver for the network adapter in your Windows 2000 Professional computer. You log on the computer by using the local Administrator account. You use Device Manager to verify that the network adapter is installed on your computer. You select the Driver tab and Update Driver option, and install a new driver from the network adapter manufacturer. You restart the computer. After displaying the Windows 2000 Professional startup screen, your computer displays aCkernel stop error message. You want to configure your computer to start successfully. Which two methods can you use to resolve the problem?（）A、Perform an emergency repair of the system from the Windows 2000 Professional CD-ROM by using the Emergency Repair Disk for the computer.B、Restart the computer. In the Recovery Console， use the Extract utility to reinstall the loopback driver from the Windows 2000 Professional CD-ROM.C、Restart the computer by using the last know good configuration.D、Restart the computer in safe mode and reinstall the original network adapter driver. E、Restart the computer and disable Plug and Play in the computer BIOS.
You are the administrator of Etechsol.com Enterprises. Your company consists of a small 20-user network. Management has decided to upgrade all computers to Windows 2000. After having a closer examination of your company’s network, you realize that only half of the network interface cards are Net PC compliant. You decide to create Windows 2000 remote boot floppies. What executable is used for creating RIS boot disks for non-PXE compliant clients?（）A、RBFG*EXEB、RIPREP*EXEC、RIS*EXED、RISPXE*EXEE、RISBOO*EXE
单选题You are the administrator of a Windows 2000 network. Your network includes 75 Windows NT Workstation 4.0 computers. You are adding 50 new PXE-compliant computers to the network. The hardware on each computer is configured identically. You are using a RIS image to deploy Windows 2000 Professional to the 50 computers. You successfully install Windows 2000 Professional on the first 10 computers. However, you cannot install Windows 2000 Professional on remaining 40 computers. What should you do?（）AConfigure the DHCP scope to add additional IP addresses.BRun Rbfg.exe from the RemoteInstall/Admin folder on the RIS server.CModify the startup sequence in the CMOS of the remaining computers.DCreate computer accounts on the remaining computers in the active directory.
单选题You are the administrator of WXYZ.com Incorporation. Your company’s network consists of Windows 2000 Professional clients and Windows 2000 Servers. Users have started reporting that the network performance has degraded in recent times. Most of the Windows 2000 Professional clients on your network use the TCP/IP protocol to communicate with the Server. You want to increase network performance. Where do you change the binding order？（）AWindows 2000 Server Network Binding Server TCP/IP on the top.BWindows 2000 Server Network Binding Workstation TCP/IP on the top.CWindows 2000 Professional Network Binding Server TCP/IP on the top.DWindows 2000 Professional Network Binding Server TCP/IP on the bottom.EWindows 2000 Professional Network Binding Workstation TCP/IP on the top.FWindows 2000 Professional Network Binding Workstation TCP/IP on thebottom.
单选题You are an administrator for a corporate network. At a branch office，you want to deploy Windows Vista to21 client computers and Windows Server 2008 to four servers. For which operating systems is the branchoffice eligible for KMS licensing？（）AWindows VistaBWindows Server 2008CBoth Windows Vista and Windows Server 2008DNeither Windows Vista nor Windows Server 2008
单选题Your network administrator has assigned you an IP address of 192.168.0.20 with subnet mask of 255.255.255.0.Your network is running in pure Windows 2000 domain. What else should know in order to join your computer to the Windows 2000 domain. （）A Address of DHCP server.B Address of WINS server.C Address of DNS server.D Address of default gateway
多选题You are the administrator of your company’s network. Your network consists of 20 Windows 2000 Professional computers. You want to configure all of the computers to allow access to the Internet. Your Budget does not allow for installing a permanent Internet connection for the network. You do have a single dial-up account at a local Internet service provider （ISP） and a 56-Kbps modem. You want the computer to be able to access the Internet when web resources are requested. What should you do？（）AConfigure the shared modem to use software handshakingBConfigure the dial-up connection to enable on-demand dialing.CConfigure the dial-up connection to enable the Internet connection sharing.DConfigure all the other computers to have a dial-up connection that uses the shared modem.EAttach the modem to one of the Windows 2000 Professional computer， and create a dial-up connection to the ISP.FAttach the modem to one of the Windows 2000 Professional computers， and share the modem on the network.
多选题You are a network administrator for ExamSheet.net’s Windows 2000 network. Your computer has Windows 2000 Professional installed. Your office has a power utage while you are running the Windows 2000 disk defragmenter. When you restart your computer， you receive the following error message： "Bad or missing operating system". You want your computer to start properly. You want to do this with least amount of administrative effort. What should you do？（）AReinstall the operating systemBStart the computer by using the Windows 2000 Professional CD-ROM.CUse the Recovery Console to repair the Master Boot Record.DUse the Emergency Repair Disk to repair the Master Boot Record.
单选题You are the administrator of B G Enterprises. Your Windows 2000 Server is configured to use the NWLink IPX/SPX compatible protocol. Your network clients also use NWLink IPX/SPX protocol. Your clients complain that they are not able to connect to the Windows 2000 Server； they can however connect to each other. What is the most likely cause of the problem？ （）AThe SUBNET Mask was set incorrectly.BFile permissions were set to no access.CAn incorrect frame type was selected on the server.DThe workstation service on the Windows 2000 Server failed to start.
多选题You are the administrator of Company.com’s Windows 2000 Network. Your routed TCP/IP network consists of 10 Windows 2000 Server computers and 75 Windows 2000 Professional computers. All computers are in the Company.com domain. Your network uses TCP/IP as the only network protocol. You are installing 10 new Windows 2000 Professional computers. You want to enable the new computers to use host names to connect to shared resources on the network. You configure a TCP/IP address, a gateway address and a subnet mask on each new computer. You want to complete the configuration to allow the computers to communicate on the network. What should you do?（）AConfigure a HOSTS file.BConfigure a LMHOSTS file.CConfigure a WINS server database.DConfigure a DHCP server address.EConfigure at least one DNS address.
单选题Most of the Windows 2000 Professional clients on your network use the TCP/IP Protocol to communicate with Server. You want to increase network performance. Where do you change the binding order of your protocols？ （）AOn the Windows 2000 Server， set TCP/IP for the Server service at the top.BOn the Windows 2000 Professional computers， set TCP/IP for the Workstation service at the top.COn the Windows 2000 Server， set TCP/IP for the Workstation service at the top.DOn the Windows 2000 Professional computers， set TCP/IP for the Server service at the top.