单选题Your network administrator has assigned you an IP address of 192.168.0.20 with subnet mask of 255.255.255.0.Your network is running in pure Windows 2000 domain. What else should know in order to join your computer to the Windows 2000 domain. （）A Address of DHCP server.B Address of WINS server.C Address of DNS server.D Address of default gateway
单选题
Your network administrator has assigned you an IP address of 192.168.0.20 with subnet mask of 255.255.255.0.Your network is running in pure Windows 2000 domain. What else should know in order to join your computer to the Windows 2000 domain. （）
A
Address of DHCP server.
B
Address of WINS server.
C
Address of DNS server.
D
Address of default gateway
参考解析
解析：
Windows 2000 domain is host names based. DNS server is used to resolve the host names to the IP addresses or vice versa. Therefore， you should have the IP address of your network DNS server.
DHCP server is used to provide the TCP/IP settings dynamically. DHCP server is broadcast based and no IP address of the DHCP server is configured at client side.
WINS server is used to resolve the NETBIOS names.
Default gateway is used to route the traffic to a remote network.
DHCP server is used to provide the TCP/IP settings dynamically. DHCP server is broadcast based and no IP address of the DHCP server is configured at client side.
WINS server is used to resolve the NETBIOS names.
Default gateway is used to route the traffic to a remote network.
相关考题：
You are the administrator of your company's network. The network is configured as shown in the exhibit.You want to install Windows 2000 Professional on 10 non-PXE-compliant computers that are on the marketing segment of your network. You start one of the computers by using a RIS boot disk. However, you cannot connect to the RIS server.You verify that the existing client computers on the network can connect to network servers, including the RIS server. The network router does not support BOOTP, so existing client computers use manually configured TCP/IP addresses. You want to enable the computers to connect to the RIS server.What should you do?A．Add a computer running DHCP Relay Agent to the marketing segment.B．Add a computer running the network monitor driver to the marketing segment.C．Move the Windows 2000 Server computer running WINS to the marketing segment.D．Move the Windows 2000 Server computer running Active Directory to the marketing segment.
You are the administrator of a network that consists of a single Windows NT 4.0 domain. The network contains five Windows NT Server domain controllers and 1,000 Windows NT Workstation client computers.You want to install Windows 2000 Server on a new computer. You want the new computer to act as domain controller in the existing domain.What should you do?A．On the new computer, install Windows NT Server 4.0 and designate the computer as a BDC in the existing domain. Promote the computer to the PDC of the domain. Upgrade the computer to Windows 2000 Server.B．On the new computer, install Windows NT Server 4.0 and designate the computer as a PDC in a new domain that has the same NetBIOS name as the existing Windows NT domain. Upgrade the computer to Windows 2000 Server. Use the Active Directory sites and services to force synchronization of the domain controllers.C．Shut down the PDC of the existing Windows NT domain from the network. On the new computer, install Windows 2000 Server, and then run the Active Directory installation wizard to install Active Directory, specifying the same NetBIOS name for the Windows 2000 domain as the existing Windows NT domain. Restart the Windows NT PDC on the network and demote it to a BDC.D．Shut down the PDC of the existing Windows NT domain from the network. On the new computer, install Windows 2000 Server, and then run the Active Directory installation wizard to install Active Directory as a replica in the existing Windows NT domain. Promote the new computer to the PDC of the domain. Restart Windows NT PDC on the network and demote it to a BDC.
You are the administrator of your company's network. Your network has 20 Windows 2000 server computers in the contoso.com domain. Your network also has 250 Windows 98 computers. You want to perform. a clean installation of Windows 2000 Professional on all of the Windows 98 computers. All of the Windows 98 computers are identical models and are PXE complaint.You want to accomplish the following goals:1. An unattended installation of Windows 2000 Professional will be performed.2. An unattended installation of company's standard applications will be performed during the installation of Windows 2000 Professional.3. Each computer will be assigned a unique security identifier description.4. The unattended installation script. will be modified so that the computers automatically join the contoso.com domain.You take the following actions:1. Install Windows 2000 Professional on a Windows 98 computer named computer1.2. Install and configure computer standard applications on computer1.3. Use Setup Manager on computer1 to create an unattended.txt file based on the current configuration including domain membership.4. Start the remaining Windows 98 computers and then install Windows 2000 Professional. Use the unattended.txt file to provide the setting for the installation.Which result or results do these actions produce? (Choose all that apply)A．An unattended installation of Windows 2000 Professional will be performed.B．An unattended installation of company's standard applications will be performed during the installation of Windows 2000 Professional.C．Each computer will be assigned a unique security identifier description.D．The unattended installation script. will be modified so that the computers automatically join the contoso.com domain.
All client computers on your company network run Windows 7. A computer is unable to connect to network resources. The configuration of the computer is as shown in the following table.You need to ensure that the computer is able to connect to network resources. What should you do?（）A.Change the IP address to 131.107.3.254.B.Change the subnet mask to 255.255.248.0.C.Change the default gateway to 131.107.0.1.D.Change the preferred DNS server to 131.107.3.1.
You are the administrator of Company.com's Windows 2000 Network. The routed TCP/IP network that you administer consists of 10 Windows 2000 Server computers and 75 Windows 2000 Professional computers. All computers are members of a single Windows 2000 domain named Company.com. TCP/IP is the only network protocol used at Company's office. You have recently installed 10 new Windows 2000 Professional computers and you want to enable the new computers to use host names to connect to shared resources on the network. You configure a TCP/IP address and a gateway address on each new computer. You want to complete the configuration to allow the computers to communicate on the network. What should you do?（）A、Configure a DNS suffix.B、Configure a subnet mask.C、Configure an LMHOSTS file.D、Configure an Interface metric.E、Configure at least one DNS address.
You are a systems administrator and you are about to assign static IP addresses to various servers on your network. For the network 192.168.20.24/29 the router is assigned to the first usable host address, while the last usable host address goes to your Sales server. Which one of the following commands would you enter into the IP properties box of the sales server?（）A、IP address: 192.168.20.14 Subnet Mask: 255.255.255.248 Default Gateway:192.168.20.9B、IP address: 192.168.20.254 Subnet Mask: 255.255.255.0 Default Gateway:192.168.20.1C、IP address: 192.168.20.30 Subnet Mask 255.255.255.248 Default Gateway:192.168.20.25D、IP address: 192.168.20.30 Subnet Mask 255.255.255.240 Default Gateway:192.168.20.17E、IP address: 192.168.20.30 Subnet Mask 255.255.255.240 Default Gateway:192.168.20.25
You are the network administrator for Company. Your network consists of one Windows NT Server 4.0 domain and 35 Windows 2000 Professional computers. The network consists of five interconnected TCP/IP subnets. All of the computers use TCP/IP as the only network protocol. You are adding 15 Windows 2000 Professional computers to the network. You configure each of the new computers to use DHCP. The computers can communicate with each other but are unable to communicate outside their own subnet. You run the ipconfig command to examine the UP address on one of the new computers. The IP address is 169.254.101.72 You want to enable the Windows 2000 Professional computers to communicate outside their own subnet. What should you do?（）A、Install a DHCP server.B、Install a WINS server. Configure each computer to use WINS.C、Create an Lmhost file on each computer.D、Create a Hosts file on each computer.
Your routed TCP/IP network consists of 10 Windows 2000 Server computers and 75 Windows 2000 Professional computers. Your network uses TCP/IP as the only network protocol. You are installing 10 new Windows 2000 Professional computers. You want to enable the new computers to use NetBIOS names to connect to all shared resources as the network. You configure a TCP/IP address and a subnet mask on each new computer. Which 2 additional TCP/IP properties should you configure on each new computer？（）A、The bindings.B、A DNS address.C、A Gateway address.D、A WINS server address.E、A DHCP server address.
Your network consists of an Active Directory domain and a DirectAccess infrastructure. You install Windows7 on a new portable computer and join the computer to the domain. You need to ensure that the computercan establish DirectAccess connections. What should you do?（）A、Install a computer certificate.B、Create a new network connection.C、Enable the Network Discovery firewall exception.D、Add the computer account to the Network Configuration Operators group.
You are the administrator of a Windows 2000 network. The network consists of a Windows 2000 domain named Company.com. You install Windows 2000 Professional on a new computer named ES1 and configure the TCP/IP settings to have a static IP address. You plan to join ES1 to the Company.com domain. You configure two DNS server addresses in the TCP/IP properties. The first DNS server address is for a DNS server hosted by your ISP, the second DNS server address is for a DNS server authoritative for the Company.com domain. When you attempt to join ES1 to the domain, you are unable to do so. You can successfully PING the IP address of each DNS server from ES1. You want ES1 to be able to join the Company.com domain. What should you do?（）A、Delete the second DNS server entry.B、Delete the first DNS server entry.C、Add an A （host） record for the computer to the appropriate DNS zone.D、Configure the computer to Obtain an IP address automatically.
You are a network administrator for ExamSheet.net’s Windows 2000 network. Your computer has Windows 2000 Professional installed. Your office has a power utage while you are running the Windows 2000 disk defragmenter. When you restart your computer， you receive the following error message： "Bad or missing operating system". You want your computer to start properly. You want to do this with least amount of administrative effort. What should you do？（）A、Reinstall the operating systemB、Start the computer by using the Windows 2000 Professional CD-ROM.C、Use the Recovery Console to repair the Master Boot Record.D、Use the Emergency Repair Disk to repair the Master Boot Record.
You are the administrator of Company.com’s Windows 2000 Network. Your routed TCP/IP network consists of 10 Windows 2000 Server computers and 75 Windows 2000 Professional computers. All computers are in the Company.com domain. Your network uses TCP/IP as the only network protocol. You are installing 10 new Windows 2000 Professional computers. You want to enable the new computers to use host names to connect to shared resources on the network. You configure a TCP/IP address, a gateway address and a subnet mask on each new computer. You want to complete the configuration to allow the computers to communicate on the network. What should you do?（）A、Configure a HOSTS file.B、Configure a LMHOSTS file.C、Configure a WINS server database.D、Configure a DHCP server address.E、Configure at least one DNS address.
You are the administrator of WXYZ.com Incorporation. Your company’s network consists of Windows 2000 Professional clients and Windows 2000 Servers. Users have started reporting that the network performance has degraded in recent times. Most of the Windows 2000 Professional clients on your network use the TCP/IP protocol to communicate with the Server. You want to increase network performance. Where do you change the binding order？（）A、Windows 2000 Server Network Binding Server TCP/IP on the top.B、Windows 2000 Server Network Binding Workstation TCP/IP on the top.C、Windows 2000 Professional Network Binding Server TCP/IP on the top.D、Windows 2000 Professional Network Binding Server TCP/IP on the bottom.E、Windows 2000 Professional Network Binding Workstation TCP/IP on the top.F、Windows 2000 Professional Network Binding Workstation TCP/IP on thebottom.
Your network consists of a single IPv4 subnet. The subnet contains 20 computers that run Windows 7. Youadd a new computer named Computer1 to the subnet. You discover that Computer1 has an IP address of169.254.34.12. You cannot connect to other computers on the network. Other computers on the networkcan connect to each other. You need to ensure that you can connect to all computers on the network. What should you do?（）A、Turn off Windows Firewall.B、Run Ipconfig.exe /renew.C、Configure a static TCP/IP address.D、Run Netsh.exe interface ipv4 install.
Your network administrator has assigned you an IP address of 192.168.0.20 with subnet mask of 255.255.255.0.Your network is running in pure Windows 2000 domain. What else should know in order to join your computer to the Windows 2000 domain. （）A、 Address of DHCP server.B、 Address of WINS server.C、 Address of DNS server.D、 Address of default gateway
You are the network administrator for Company. Company has recently upgraded its network to a 100Mbps standard and you are now in the process of removing all the old adapter and installing a new Token Ring network adapter into the Windows 2000 Professional computer. On the first computer you install the new hardware and configure the static TCP/IP protocol settings to be the same as they were for the previously installed network adapter. When you restart the computer, however, you cannot access the network. You try to ping your network adapter's TCP/IP address locally. You receive the following error message: "Request timed out." You want to enable the computer to communicate on the new network. What should you do? （）A、Enable DHCP in the TCP/IP properties.B、Replace the Token Ring network adapter with an Ethernet network adapter.C、Configure a different TCP/IP address on the same subnet.D、Configure a valid DNS Server in the TCP/IP properties.
You are the administrator of your company's network. Your network has 20 Windows 2000 server computers in the contoso.com domain. Your network also has 250 Windows 98 computers. You want to perform a clean installation of Windows 2000 Professional on all of the Windows 98 computers. All of the Windows 98 computers are identical models and are PXE complaint. You want to accomplish the following goals: • An unattended installation of Windows 2000 Professional will be performed. • An unattended installation of company's standard applications will be performed during the installation of Windows 2000 Professional. • Each computer will be assigned a unique security identifier description. • The unattended installation script will be modified so that the computers automatically join the contoso.com domain. You take the following actions: • Install Windows 2000 Professional on a Windows 98 computer named computer1. • Install and configure computer standard applications on computer1. • Use Setup Manager on computer1 to create an unattended.txt file based on the current configuration including domain membership. • Start the remaining Windows 98 computers and then install Windows 2000 Professional. Use the unattended.txt file to provide the setting for the installation. Which result or results do these actions produce?（）A、 An unattended installation of Windows 2000 Professional will be performed.B、 An unattended installation of company’s standard applications will be performed during the Installation of Windows 2000 Professional.C、 Each computer will be assigned a unique security identifier description.D、 The unattended installation script will be modified so that the computers automatically join the contoso.com domain.
单选题You are the network administrator for Company. Company has recently upgraded its network to a 100Mbps standard and you are now in the process of removing all the old adapter and installing a new Token Ring network adapter into the Windows 2000 Professional computer. On the first computer you install the new hardware and configure the static TCP/IP protocol settings to be the same as they were for the previously installed network adapter. When you restart the computer, however, you cannot access the network. You try to ping your network adapter's TCP/IP address locally. You receive the following error message: "Request timed out." You want to enable the computer to communicate on the new network. What should you do? （）AEnable DHCP in the TCP/IP properties.BReplace the Token Ring network adapter with an Ethernet network adapter.CConfigure a different TCP/IP address on the same subnet.DConfigure a valid DNS Server in the TCP/IP properties.
多选题Your routed TCP/IP network consists of 10 Windows 2000 Server computers and 75 Windows 2000 Professional computers. Your network uses TCP/IP as the only network protocol. You are installing 10 new Windows 2000 Professional computers. You want to enable the new computers to use NetBIOS names to connect to all shared resources as the network. You configure a TCP/IP address and a subnet mask on each new computer. Which 2 additional TCP/IP properties should you configure on each new computer？（）AThe bindings.BA DNS address.CA Gateway address.DA WINS server address.EA DHCP server address.
单选题Your network administrator has assigned you an IP address of 192.168.0.20 with subnet mask of 255.255.255.0.Your network is running in pure Windows 2000 domain. What else should know in order to join your computer to the Windows 2000 domain. （）A Address of DHCP server.B Address of WINS server.C Address of DNS server.D Address of default gateway
单选题Your network contains a domain controller that has two network connections named Internal and Private. Internal has an IP address of 192.168.0.20. Private has an IP address of 10.10.10.5. You need to prevent the domain controller from registering Host （A） records for the 10.10.10.5 IP address. What should you do（）AModify the netlogon.dns file on the domain controller.BModify the Name Server settings of the DNS zone for the domain.CModify the properties of the Private network connection on the domain controller.DDisable netmask ordering on the DNS server that hosts the DNS zone for the domain.
单选题Your network consists of an Active Directory domain and a DirectAccess infrastructure. You install Windows7 on a new portable computer and join the computer to the domain. You need to ensure that the computercan establish DirectAccess connections. What should you do?（）AInstall a computer certificate.BCreate a new network connection.CEnable the Network Discovery firewall exception.DAdd the computer account to the Network Configuration Operators group.
单选题You are the network administrator for ExamSheet. Your network consists of one Windows NT Server 4.0 domain and 35 Windows 2000 Professional computers. The network consists of five interconnected TCP/IP subnets. All of the computers use TCP/IP as the only network protocol. You are adding 15 Windows 2000 Professional computers to the network. You configure each of the new computers to use DHCP. The computers can communicate with each other but are unable to communicate outside their own subnet. You run the ipconfig command to examine the IP address on one of the new computers. The IP address is 169.254.101.72 You want to enable the Windows 2000 Professional computers to communicate outside their own subnet. What should you do？（）AInstall a DHCP server.BInstall a WINS server. Configure each computer to use WINS.CCreate an Lmhost file on each computer.DCreate a Hosts file on each computer.
单选题You are the network administrator for Company. Your network consists of one Windows NT Server 4.0 domain and 35 Windows 2000 Professional computers. The network consists of five interconnected TCP/IP subnets. All of the computers use TCP/IP as the only network protocol. You are adding 15 Windows 2000 Professional computers to the network. You configure each of the new computers to use DHCP. The computers can communicate with each other but are unable to communicate outside their own subnet. You run the ipconfig command to examine the UP address on one of the new computers. The IP address is 169.254.101.72 You want to enable the Windows 2000 Professional computers to communicate outside their own subnet. What should you do?（）AInstall a DHCP server.BInstall a WINS server. Configure each computer to use WINS.CCreate an Lmhost file on each computer.DCreate a Hosts file on each computer.
单选题You are the administrator of a Windows 2000 network. The network consists of a Windows 2000 domain named Company.com. You install Windows 2000 Professional on a new computer named ES1 and configure the TCP/IP settings to have a static IP address. You plan to join ES1 to the Company.com domain. You configure two DNS server addresses in the TCP/IP properties. The first DNS server address is for a DNS server hosted by your ISP, the second DNS server address is for a DNS server authoritative for the Company.com domain. When you attempt to join ES1 to the domain, you are unable to do so. You can successfully PING the IP address of each DNS server from ES1. You want ES1 to be able to join the Company.com domain. What should you do?（）ADelete the second DNS server entry.BDelete the first DNS server entry.CAdd an A （host） record for the computer to the appropriate DNS zone.DConfigure the computer to Obtain an IP address automatically.
单选题Your network consists of a single IPv4 subnet. The subnet contains 20 computers that run Windows 7. Youadd a new computer named Computer1 to the subnet. You discover that Computer1 has an IP address of169.254.34.12. You cannot connect to other computers on the network. Other computers on the networkcan connect to each other. You need to ensure that you can connect to all computers on the network. What should you do?（）ATurn off Windows Firewall.BRun Ipconfig.exe /renew.CConfigure a static TCP/IP address.DRun Netsh.exe interface ipv4 install.
单选题You are the administrator of your company’s network. You run the English （US） edition of Windows 2000 Professional on all computers in your network. As your company continues to grow， and the number of computers is continually expanding， you decide that another domain is needed. Management asks you about what is required to accommodate this new domain. What should you answer the Management in this regard？ （）AWINS， DHCP and DNSBAt least one domain controller and one DNS server.CAt least one domain controller， Active Directory and DNS server.DNothing more is needed.ENothing more is needed， we can just subnet the network.
单选题You are the network administrator for Company. Your network is a native mode Windows 2000 domain consisting of 50 Windows 2000 Professional client computers and six Windows 2000 Server computers. There are no routers on the network. The client computers have been configured for dynamic IP address application. The network is configured as shown in the Network Diagram. A user reports that she cannot connect to the server named ES1 from her client computer named Workstation5. When she attempts to browse //ES1 from the Run line she receives the message, “The network path was not found”. No other users are reporting problems connecting to ES1. From the user’s computer, you browse //192.168.72.6 from the Run line and successfully connect to the server. You run the ipconfig /all command. The relevant results are shown in the following table. You want the user to be able to access resources on ES1 by using the computer name. What should you do? （）AOn the Internet Protocol (TCP/IP) Properties, sheet, select the Obtain DNS server address automatically option.BOn the Internet Protocol (TCP/IP) Properties, sheet, select the Obtain an IP address automatically option. CConfigure the client computer with a default gateway of 192.168.0.1.DConfigure the client computer with a subnet mask of 255.255.0.0.EConfigure the client computer with a WINS server of 192.168.72.5.