单选题You would like to configure your PC's IP address of 10.10.0.156 as an FTP host with a username of user and a password of mypass.Which configuration command accomplishes this goal?（）Ahost user pc 10.10.0.156 ftp user mypassBhost user pc 10.10.0.156 tftp user mypassChost name user pc 10.10.0.156 ftp user mypassDhost name user pc 10.10.0.156 tftp user mypass
单选题
You would like to configure your PC's IP address of 10.10.0.156 as an FTP host with a username of user and a password of mypass.Which configuration command accomplishes this goal?（）
A
host user pc 10.10.0.156 ftp user mypass
B
host user pc 10.10.0.156 tftp user mypass
C
host name user pc 10.10.0.156 ftp user mypass
D
host name user pc 10.10.0.156 tftp user mypass
参考解析
解析：
暂无解析
相关考题：
---______?------- That would be great! Please drop me off at the library.A. could you bring me the billB. would you like me to give you a liftC. could you tell me the postcode for PatiaD. Would you like to have my e-mail address.
You are unable to telnet to a router at address 203.125.12.1 from a workstation with the IP address 203.125.12.23. You suspect that there is a problem with the IP protocol stack in your PC. Which of the following actions is most likely to confirm your diagnosis?A. ping 127.0.0.0B. ping 203.125.12.1C. telnet 127.0.0.1D. ping 127.0.0.1E. tracert 203.125.12.1F. None of the above
You would like to configure your PC’s IP address of 10.10.0.156 as an FTP host with au ser name of user anda password of mypass.Which configuration command accomplishes this goal?() A.host userpc 10.10.0.156 ftp usermypassB.host userpc 10.10.0.156 tftp usermypassC.host nameuserpc 10.10.0.156 ftp usermypassD.host nameuserpc 10.10.0.156 tftp usermypass
An administrator is setting up a network and would like to prevent users from having the ability toplug their PC into the network to receive an IP address.Which of the following addressing schemes should the technician use?（）A.NATB.DynamicC.SubnettingD.Static
You‘re working at TestKing as a network administrator when your MCSE assistant calls you for help. He has attempted to configure Router TK1 and incorrectly configured the router interface with a subnet broadcast address. You have to correct this by first removing the incorrect IP address and then re-entering the first usable IP address of the same subnet.How will you do this?（）A.B.C.D.E.
The network administrator has asked you to check the status of the workstation’s IP stack by pinging the loopback address.Which address would you ping to perform this task?() A.10.1.1.1B.127.0.0.1C.192.168.0.1D.239.1.1.1
The network administrator has asked you to check the status of the workstation’s IP stack by pinging the loopback address.Which address would you ping to perform this task？（）A、10.1.1.1B、127.0.0.1C、192.168.0.1D、239.1.1.1
You are the administrator of Company.com's Windows 2000 Network. The routed TCP/IP network that you administer consists of 10 Windows 2000 Server computers and 75 Windows 2000 Professional computers. All computers are members of a single Windows 2000 domain named Company.com. TCP/IP is the only network protocol used at Company's office. You have recently installed 10 new Windows 2000 Professional computers and you want to enable the new computers to use host names to connect to shared resources on the network. You configure a TCP/IP address and a gateway address on each new computer. You want to complete the configuration to allow the computers to communicate on the network. What should you do?（）A、Configure a DNS suffix.B、Configure a subnet mask.C、Configure an LMHOSTS file.D、Configure an Interface metric.E、Configure at least one DNS address.
You are the administrator of a Windows 2000 network. You install Windows 2000 Professional on a new computer and configure the TCP/IP settings to have a static IP address. While testing network connectivity from the new computer, you discover an error in the DNS server address that is configured in the TCP/IP settings. You configure the correct DNS server address, which is 10.1.1.5. However, you are still unable to successfully connect to network resources by name. You run the IPconfig/all command. The results indicate that the DNS server address is now configured as 0.0.0.0 You need to ensure that the computer can connect to network resources by name. What should you do?（）A、Stop and restart the DNS Client service.B、Add 10.1.1.5 to the DNS server list on the TCP/IP Advanced Properties tab.C、Add an A （host） record for the computer to the DNS server’s zone file.D、Configure your DHCP server to have a DNS server address of 10.1.1.5.
You are a systems administrator and you are about to assign static IP addresses to various servers on your network. For the network 192.168.20.24/29 the router is assigned to the first usable host address, while the last usable host address goes to your Sales server. Which one of the following commands would you enter into the IP properties box of the sales server?（）A、IP address: 192.168.20.14 Subnet Mask: 255.255.255.248 Default Gateway:192.168.20.9B、IP address: 192.168.20.254 Subnet Mask: 255.255.255.0 Default Gateway:192.168.20.1C、IP address: 192.168.20.30 Subnet Mask 255.255.255.248 Default Gateway:192.168.20.25D、IP address: 192.168.20.30 Subnet Mask 255.255.255.240 Default Gateway:192.168.20.17E、IP address: 192.168.20.30 Subnet Mask 255.255.255.240 Default Gateway:192.168.20.25
You would like to operate IS-IS on interface atm 6/0.33 with an IP address of 192.168.1.1/24. Which set of commands accomplishes this?（）A、router isis network 192.168.1.0 0.0.0.255B、router isis network 192.168.1.0 255.255.255.0C、interface atm 6/0.33 ip address 192.168.1.1 255.255.255.0 router isisD、interface atm 6/0.33 ip address 192.168.1.1 255.255.255.0 ip router isis
Your routed TCP/IP network consists of 10 Windows 2000 Server computers and 75 Windows 2000 Professional computers. Your network uses TCP/IP as the only network protocol. You are installing 10 new Windows 2000 Professional computers. You want to enable the new computers to use NetBIOS names to connect to all shared resources as the network. You configure a TCP/IP address and a subnet mask on each new computer. Which 2 additional TCP/IP properties should you configure on each new computer？（）A、The bindings.B、A DNS address.C、A Gateway address.D、A WINS server address.E、A DHCP server address.
You are designing the IP address assignment strategy for the VPN users. Which two actions should you perform.（）A、 Configure VPN1 as a DHCP Relay Agent.B、 Configure VPN1 to assign IP Address by using DHCP server.C、 Configure VPN1 to have a static pool of IP Address from the network address of 131.107.1.0/24.D、 Configure VPN1 to have a static pool of IP Address from the network address of 192.168.1.0/24.E、 Configure the perimeter firewall to allow inbound DHCP traffic to be passed to VPN1.F、 Configure the interval firewall to allow DHCP broadcasts to be forwarded from the external network to the internal network.
You are the administrator of Company.com’s Windows 2000 Network. Your routed TCP/IP network consists of 10 Windows 2000 Server computers and 75 Windows 2000 Professional computers. All computers are in the Company.com domain. Your network uses TCP/IP as the only network protocol. You are installing 10 new Windows 2000 Professional computers. You want to enable the new computers to use host names to connect to shared resources on the network. You configure a TCP/IP address, a gateway address and a subnet mask on each new computer. You want to complete the configuration to allow the computers to communicate on the network. What should you do?（）A、Configure a HOSTS file.B、Configure a LMHOSTS file.C、Configure a WINS server database.D、Configure a DHCP server address.E、Configure at least one DNS address.
You are the network administrator for Company. Company has recently upgraded its network to a 100Mbps standard and you are now in the process of removing all the old adapter and installing a new Token Ring network adapter into the Windows 2000 Professional computer. On the first computer you install the new hardware and configure the static TCP/IP protocol settings to be the same as they were for the previously installed network adapter. When you restart the computer, however, you cannot access the network. You try to ping your network adapter's TCP/IP address locally. You receive the following error message: "Request timed out." You want to enable the computer to communicate on the new network. What should you do? （）A、Enable DHCP in the TCP/IP properties.B、Replace the Token Ring network adapter with an Ethernet network adapter.C、Configure a different TCP/IP address on the same subnet.D、Configure a valid DNS Server in the TCP/IP properties.
You want to configure your Windows 2000 Professional computer to remotely access your company's Windows 2000 Routing and Remote Access server. You configure a VPN connection. For security purposes, you configure the VPN connection to use MS-CHAP v2 only and to require encryption. You also configure TCP/IP to obtain an IP address automatically, to enable IPSec, and to set IPSec to Secure Server. When you try to connect, you receive the following error message, "The encryption attempt failed because no valid certificate was found." What should you do to connect to the server? （）A、Enable the VPN connection to use MS-CHAP.B、Change the data encryption setting toOptional Encryption.C、Specify a TCP/IP address in theNetworkproperties.D、Change the IPSec policy setting toClient.
Network topology exhibit: You are the administrator at ExamSheet.net. You use TCP/IP as the only protocol on your network. The network is configured as in the network topology exhibit. All existing computers and devices use 255.255.240.0 as the subnet mask. You install Windows 2000 Professional on a computer named ExamSheet2. You configure ExamSheet2 to have a TCP/IP address of 10.10.20.234, a default gateway of 10.10.20.1, a subnet mask of 255.255.0.0 and a WINS server address of 10.10.13.10. You cannot connect to shared resources on ExamSheetB by using its UNC name. You want ExamSheet2 to be able to connect to ExamSheetB. What should you do? （）A、Install a WINS server on the same segment as Company2B、Install and configure a DNS server and configure Company2 to use the DNS Server service.C、Configure Company2 with a default gateway address 10.10.13.1.D、Configure Company2 with a default gateway address of 10.10.30.1.E、Configure Company2 with a TCP/IP address of 10.10.20.234.
Your Company upgrades its network to 100 Mbps. You remove the old network adapter and install a new 10/100 Mbps network adapter into a Windows 2000 Professional computer. You configure the TCP/IP protocol settings to be the same as they were for the previously installed network adapter. When you restart eh computer, however, you cannot access the network. You try to ping your network adapter’s TCP/IP address locally. You receive the following error message. “Request timed out.” Next, you try to ping 127.0.0.1 and receive the same error message. What must you do?（）A、Configure a different TCP/IP addressB、Enable DHCP in the TCP/IP propertiesC、Enable DNS in the TCP/IP propertiesD、Configure the network adapter to run at 100 Mbps onlyE、Replace the network adapter.
多选题Your routed TCP/IP network consists of 10 Windows 2000 Server computers and 75 Windows 2000 Professional computers. Your network uses TCP/IP as the only network protocol. You are installing 10 new Windows 2000 Professional computers. You want to enable the new computers to use NetBIOS names to connect to all shared resources as the network. You configure a TCP/IP address and a subnet mask on each new computer. Which 2 additional TCP/IP properties should you configure on each new computer？（）AThe bindings.BA DNS address.CA Gateway address.DA WINS server address.EA DHCP server address.
单选题Your network contains two DHCP servers. The DHCP servers are named DHCP1 and DHCP2. The internal network contains 1，000 DHCP client computers that are located on a single subnet. A routerseparates the internal network from the Internet. The router has a single IP address on the internal interface. DHCP1 has the following scope information. èStarting IP address： 172.16.0.1 èEnding IP address： 172.16.7.255 èSubnet mask： 255.255.240.0 You need to provide a fault-tolerant DHCP infrastructure that supports the client computers on the internal network. In the event that a DHCP server fails， all client computers must be able to obtain a valid IP address. How should you configure DHCP2？（）ACreate a scope for the subnet 172.16.0.0/20. Configure the scope to use a starting IP address of 172.16.8.1 and an ending IP address of 172.16.15.254.BCreate a scope for the subnet 172.16.0.0/21. Configure the scope to use a starting IP address of 172.16.0.1 and an ending IP address of 172.16.15.254.CCreate a scope for the subnet 172.16.8.0/21. Configure the scope to use a starting IP address of 172.16.8.1 and an ending IP address of 172.16.10.254.DCreate a scope for the subnet 172.17.0.0/16. Configure the scope to use a starting IP address of 172.17.0.1 and an ending IP address of 172.17.255.254.
单选题Your network contains the servers configured as shown in the following table. Name Server role Private IP address Public IP address Server1Routing and Remote Access server192.168.1.1 131.107.0.1 Web1 Web server 192.168.1.2 ? Your company is assigned the public IP addresses from 131.107.0.1 to 131.107.0.31.You need to ensure that Web1 is accessible from the Internet by using https://131.107.0.2.What should you do from the Routing and Remote Access console？（）AFrom the Static Routes node, configure a static route.BFrom the server properties, configure SSL Certificate Binding.CFrom the NAT interface, add an address pool and a reservation.DFrom the NAT interface, configure the Secure Web Server (HTTPS) service.
单选题You want to implement IP address to Computer Name resolving on your Windows 2000 network. How do you configure this in a NETBIOS environment？（）AInstall a DHCP ServerBInstall a DNS ServerCInstall a WINS ServerDInstall an LMHOST Converter
单选题You have a firewall filter containing two terms applied in an inbound direction on a customer interface. You would like this filter to protect your network from a spoofed denial of service attack. What match criterion should be used in the first term of the filter？（）ASource TCP portBSource IP addressCDestination TCP portDDestination IP address
单选题You would like to configure your PC’s IP address of 10.10.0.156 as an FTP host with au ser name of user anda password of mypass.Which configuration command accomplishes this goal？（）Ahost userpc 10.10.0.156 ftp usermypassBhost userpc 10.10.0.156 tftp usermypassChost nameuserpc 10.10.0.156 ftp usermypassDhost nameuserpc 10.10.0.156 tftp usermypass
多选题You are the administrator of Company.com’s Windows 2000 Network. Your routed TCP/IP network consists of 10 Windows 2000 Server computers and 75 Windows 2000 Professional computers. All computers are in the Company.com domain. Your network uses TCP/IP as the only network protocol. You are installing 10 new Windows 2000 Professional computers. You want to enable the new computers to use host names to connect to shared resources on the network. You configure a TCP/IP address, a gateway address and a subnet mask on each new computer. You want to complete the configuration to allow the computers to communicate on the network. What should you do?（）AConfigure a HOSTS file.BConfigure a LMHOSTS file.CConfigure a WINS server database.DConfigure a DHCP server address.EConfigure at least one DNS address.
单选题An administrator is setting up a network and would like to prevent users from having the ability to plug their PC into the network to receive an IP address. Which of the following addressing schemes should the technician use?（）ANATBDynamicCSubnettingDStatic
单选题You are the administrator of a Windows 2000 network. You install Windows 2000 Professional on a new computer and configure the TCP/IP settings to have a static IP address. While testing network connectivity from the new computer, you discover an error in the DNS server address that is configured in the TCP/IP settings. You configure the correct DNS server address, which is 10.1.1.5. However, you are still unable to successfully connect to network resources by name. You run the IPconfig/all command. The results indicate that the DNS server address is now configured as 0.0.0.0 You need to ensure that the computer can connect to network resources by name. What should you do?（）AStop and restart the DNS Client service.BAdd 10.1.1.5 to the DNS server list on the TCP/IP Advanced Properties tab.CAdd an A （host） record for the computer to the DNS server’s zone file.DConfigure your DHCP server to have a DNS server address of 10.1.1.5.