The Testking router is running both RIP and IGRP, and the same route is learned by this router from both of these methods. However, when you issue the command"show ip route" you see only the IGRP route, and not the RIP route. Why is this?（）A. IGRP has a faster update timer.B. IGRP has a lower administrative distance.C. RIP has a higher metric value for that route.D. The IGRP route has fewer hops.E. The RIP path has a routing loop.
The Testking router is running both RIP and IGRP, and the same route is learned by this router from both of these methods. However, when you issue the command"show ip route" you see only the IGRP route, and not the RIP route. Why is this?（）
A. IGRP has a faster update timer.
B. IGRP has a lower administrative distance.
C. RIP has a higher metric value for that route.
D. The IGRP route has fewer hops.
E. The RIP path has a routing loop.
相关考题：
下面哪条命令用于校验路由发送的路由信息?() A.Router（config-router）#show route ipB.Router（config）#show ip ripC.Router#show ip rip routeD.Router#show ip route
Which of the following features work the same in both RIP－ 2 and RIPng?() A. Distance Vector Logi cB. Uses UDPC. Uses RIP - specific authenticationD. Maximum useful metric of 15E. Automatic route summarization
Refer to the exhibit. A new TAC engineer comes to you for advice. The engineer wants to configure RIPv2 - OSPF two - way redistribution while avoiding routing loops. Which two additio ns to the router B1 configuration should the engineer make?（）A. access - list 40 deny 172.16.1.0 0.0.0.255 access - list 40 permit any router rip redistribute ospf 100 metric 5 distribute- list 40 out ospf 100B. ip prefix - list rip_routes permit 172. 16.1.16/25 ge 26 le 28 route - map redis - ospf deny 10 match ip address prefix- list rip_routes router rip redistribute ospf 10 route - map redis - ospf subnetsC. ip prefix - list rip - to - ospf permit 10.1.1.8/25 ge 26 le 28 route - map redis - rip deny 20 match i p address prefix - list rip - to - ospf router ospf 100 redistribute rip route - map redis - rip subnetsD. access - list 15 deny 10.1.1.0 0.0.0.63 access - list 15 permit any route - map redis - rip deny 10 match ip address 15 route - map redis - rip permit 20 router os pf 100 redistribute rip route - map redis - rip subnets
Which command displays EIGRP－related router activities as they occur?() A. TestKing# show ip route *B. TestKing# debug eigrp routeC. TestKing# debug ip eigrpD. TestKing# debug ip protocols eigrpE. TestKing# show ip route eigrp
Which IOS commands can a network technician use to verify all RIP, IGRP,EIGRP, and OSPF routing protocol configurations?() A. debug ip routingB. show running-configC. show ip route protocolsD. show ip protocolsE. show protocols al
A routing table contains static, RIP, and IGRP routes destined to the same network with each route set to its default administrative distance. Which route will be the preferred route?() A. The RIP routeB. The static routeC. The IGRP routeD. All three will load balance.
Refer to the exhibit. When running OSPF, What would cause router A not to form an adjacency with router B?() A.The loopback addresses are on different subnetsB.The value of the dead timers on the router are differentC.Route summarization is enabled on both routersD.The process indentifier on router A is different than the process identifier on router B
One of the most widely used routing protocols in IP networks is the Routing Information Protocol（RIP）。RIP is the canonical example of a routing protocol built on the（ ）algorithm.Routing protocols in internetworks differ slightly from the idealized graph model.In an internetwork,the goal of the routers to forward packets to various（请作答此空）.Routers running RIP send their advertisement about cost every（ ）seconds.A router also sends an update message whenever an update from another router causes it to change its routing table.It is possible to use a range of different metrics or costs for the links in a routing protocol.RIP takes the simplest approach,with all link costs being equal（ ）。Thus it always tries to find the minimum hop route.Valid distances are 1 through（ ）。This also limits RIP to running on fairly small networks.A.computersB.routersC.switchesD.networks
Which of the following features work the same in both RIP- 2 and RIPng?（）A、Distance Vector Logi cB、Uses UDPC、Uses RIP - specific authenticationD、Maximum useful metric of 15E、Automatic route summarization
A routing table contains static, RIP, and IGRP routes destined to the same network with each route set to its default administrative distance. Which route will be the preferred route?（）A、The RIP routeB、The static routeC、The IGRP routeD、All three will load balance.
The Testking router is running both RIP and IGRP, and the same route is learned by this router from both of these methods. However, when you issue the command"show ip route" you see only the IGRP route, and not the RIP route. Why is this?（）A、IGRP has a faster update timer.B、IGRP has a lower administrative distance.C、RIP has a higher metric value for that route.D、The IGRP route has fewer hops.E、The RIP path has a routing loop.
A router simultaneously receives all the following routes in various routing updates. Which of thefollowing routes would end up in the routing table？（Choose all that apply.）（）A、RIP route 10.1.2.0/24B、EIGRP route 10.1.2.0/24C、RIP route 10.1.0.0/16D、OSPF route 10.1.0.0/16E、RIP route 10.0.0.0/16F、OSPF route 10.1.2.0/24
In BGP routing，what does the rule of synchronization mean？（）A、A BGP router can only advertise an EBGP learned route，provided that the route is an IGP route in the routing table.B、A BGP router can only advertise an IBGP learned route，provided that the route is an IGP route in the routing table.C、A BGP router can only advertise an IBGP learned route，provided that the route is an IGP route that is not in the routing table.D、A BGP router can only advertise an EBGP learned route，provided that the route is a metric of 0 in the BGP table.
The Testking network is utilizing RIP as the IP routing protocol. Router TK1 learns how to reach the same destination via 6 different paths. All paths have the same metric and administrative distance. With all routers using the default operation,which of the paths will be chosen to reach the destination?（）A、Only the first two paths that are learned.B、Four of the paths.C、All six routes in a routed robin fashion.D、The oldest two paths in the routing table.E、The first path learned to the destination network.
A router has two paths to reach another network in a different autonomous system. Neither route was generated by the local router and both routes have the same default weight an d local preference values. Which statement is true about how BGP would select the best path?（）A、To influence one route to be preferred, its default local preference value will be changed via the use of the command bgp default local - preference 50B、Th e router will prefer the shortest autonomous system pathC、If the command bgp always - compare - med has been given, then the router will prefer the route with the highest MEDD、The router will prefer the route with the lower MED
Which IOS commands can a network technician use to verify all RIP, IGRP,EIGRP, and OSPF routing protocol configurations?（）A、debug ip routingB、show running-configC、show ip route protocolsD、show ip protocolsE、show protocols al
Which command displays EIGRP-related router activities as they occur?（）A、TestKing# show ip route *B、TestKing# debug eigrp routeC、TestKing# debug ip eigrpD、TestKing# debug ip protocols eigrpE、TestKing# show ip route eigrp
下面哪条命令用于校验路由发送的路由信息？（）A、Router（config-router）#show route ipB、Router（config）#show ip ripC、Router#show ip rip routeD、Router#show ip route
What is the first step in BGP route selection?（）A、The local router prefers the route with the shortest AS Path.B、The local router verifies that it has a route to the BGP Next Hop IP address.C、The local router prefers the route from the peer with the lowest peer ID address.D、The local router prefers the route learned from an EBGP peer over a route learned from an IBGP peer.
单选题In BGP routing，what does the rule of synchronization mean？（）AA BGP router can only advertise an EBGP learned route，provided that the route is an IGP route in the routing table.BA BGP router can only advertise an IBGP learned route，provided that the route is an IGP route in the routing table.CA BGP router can only advertise an IBGP learned route，provided that the route is an IGP route that is not in the routing table.DA BGP router can only advertise an EBGP learned route，provided that the route is a metric of 0 in the BGP table.
单选题A routing table contains static, RIP, and IGRP routes destined to the same network with each route set to its default administrative distance. Which route will be the preferred route?（）AThe RIP routeBThe static routeCThe IGRP routeDAll three will load balance.
单选题You have a router running BGP for the MPLS network and OSPF for the local LAN network at the sales office. A route is being learned from the MPLS network that also exists on the OSPF local network.It is important that the router chooses the local LAN route being learned from the downstream switch running OSPF rather than the upstream BGP neighbor. Also，if the local OSPF route goes away，the BGP route needs to be used. What should be configured to make sure that the router will choose the LAN network as the preferred path？（）Astatic route needs to be addedBfloating static route needs to be addedCbgp backdoor commandDospf backdoor command
单选题The Testking router is running both RIP and IGRP, and the same route is learned by this router from both of these methods. However, when you issue the command"show ip route" you see only the IGRP route, and not the RIP route. Why is this?（）AIGRP has a faster update timer.BIGRP has a lower administrative distance.CRIP has a higher metric value for that route.DThe IGRP route has fewer hops.EThe RIP path has a routing loop.
单选题A router has two paths to reach another network in a different autonomous system. Neither route was generated by the local router and both routes have the same default weight an d local preference values. Which statement is true about how BGP would select the best path?（）ATo influence one route to be preferred, its default local preference value will be changed via the use of the command bgp default local - preference 50BTh e router will prefer the shortest autonomous system pathCIf the command bgp always - compare - med has been given, then the router will prefer the route with the highest MEDDThe router will prefer the route with the lower MED
单选题What is the first step in BGP route selection?（）AThe local router prefers the route with the shortest as-path.BThe router first verifies that it has a route to thebgp Next Hop IP address.CThe local router prefers the route from the peer with the lowest peerid address.DThe local router prefers the route learned from anebgp peer over a route learned from anibgp peer.
多选题Which of the following features work the same in both RIP- 2 and RIPng?（）ADistance Vector Logi cBUses UDPCUses RIP - specific authenticationDMaximum useful metric of 15EAutomatic route summarization
多选题Which IOS commands can a network technician use to verify all RIP, IGRP,EIGRP, and OSPF routing protocol configurations?（）Adebug ip routingBshow running-configCshow ip route protocolsDshow ip protocolsEshow protocols al