You try to add a new router into the established Testking OSPF network. The networks attached to the new router do not appear in the routing tables of the other OSPF routers.The new router was configured for OSPF in the following way:Router(config) router ospf 99Router(config-if) network 10.0.0.0 255.0.0.0 area 0Based on this information, what is the most likely problem?()A. The process id is configured improperly.B. The OSPF area is configured improperly.C. The network wildcard mask is configured improperly.D. The network number is configured improperly.E. The AS is configured improperly.F. The network subnet mask is configured improperly.G. All of the above are likely problems.

You try to add a new router into the established Testking OSPF network. The networks attached to the new router do not appear in the routing tables of the other OSPF routers.The new router was configured for OSPF in the following way:Router(config) router ospf 99Router(config-if) network 10.0.0.0 255.0.0.0 area 0Based on this information, what is the most likely problem?()

A. The process id is configured improperly.

B. The OSPF area is configured improperly.

C. The network wildcard mask is configured improperly.

D. The network number is configured improperly.

E. The AS is configured improperly.

F. The network subnet mask is configured improperly.

G. All of the above are likely problems.


相关考题:

You are the administrator for your company's network. The network is configured as shown in the exhibit.You want to install Windows 2000 Professional on 20 new PXE-compliant computers on the marketing segment of your network. The new computers do not have operating systems installed.You create a RIS image. You load the image onto the RIS server. You then start the new computers.You find that the new computers cannot connect to the RIS server. You verify that the new computers cannot connect to the RIS server. You verify that the existing client computers in the network can connect to the network servers, including the RIS server. You want to enable the new computers to connect to the RIS server.What should you do?A.Add a Windows 2000 Server computer running WINS to the network.B.Add a Windows 2000 Server computer running DHCP to the network.C.Add the domain Everyone group to the RIS OS image security settings.D.Place the new computers on the same segment as the RIS server.

A new router, named TK1, is being installed. You wish to add this router to your existing OSPF network. In doing so, you configure the following:TK1(config) router ospf 1TK1(config-router) network 10.10.10.0 255.255.255.0 area 0After making this change, you notice that the networks attached to TK1 are not being learned by the other OSPF routers. What could be the cause of this?()A. The AS is not correctly configuredB. The network subnet mask is incorrectly configuredC. The network wildcard mask is configured incorrectlyD. The network number is not correctly configuredE. The process id is configured incorrectlyF. None of the above

On your OSPF network, routers TK1 and TK2 belong to the same Ethernet network. However, they are unable to establish an adjacency over this link. While troubleshooting this problem, you issue the show ip ospf interface Ethernet 0command on each router. The output from these commands is displayed below:What is the underlying cause of the routers failing to become adjacent?()A. The OSPF area is misconfigured.B. The priority on TK2 should be set lower.C. The cost on TK2 should be set lower.D. The hello and dead timers are misconfigured.E. You need to add a backup designated router to the network.F. The OSPF process ID numbers do not match.

You need to upgrade the IOS of an existing router on your network. The new IOS image is located on a TFTP server that you have set up within the network. What command should you issue in order to download the new IOS version?()A. Router# copy tftp flashB. Router# copy flash runC. Router(config)# restore flashD. Router(config)# repair flashE. Router#copy flash tftpF. Router# copy start flash

A customer wants to TFTP a new image from the corporate network to Flash on the Teleworker router through the IPSec tunnel. How should you configure the Teleworker router?()A、No additional steps are required. B、Add the appropriate source-interface command. C、The router cannot access a server in the Enterprise Campus network. D、The Teleworker Router does not have any client applications; therefore this type of request is not possible.

A new router, named TK1, is being installed. You wish to add this router to your existing OSPF network. In doing so, you configure the following: TK1(config)# router ospf 1 TK1(config-router)# network 10.10.10.0 255.255.255.0 area 0 After making this change, you notice that the networks attached to TK1 are not being learned by the other OSPF routers. What could be the cause of this?()A、The AS is not correctly configuredB、The network subnet mask is incorrectly configuredC、The network wildcard mask is configured incorrectlyD、The network number is not correctly configuredE、The process id is configured incorrectlyF、None of the above

You need to upgrade the IOS of an existing router on your network. The new IOS image is located on a TFTP server that you have set up within the network. What command should you issue in order to download the new IOS version?()A、Router# copy tftp flashB、Router# copy flash runC、Router(config)# restore flashD、Router(config)# repair flashE、Router#copy flash tftpF、Router# copy start flash

You are trying to bring up a new Testking location onto your existing frame relay network. The new location is using an Adtran router and you are having difficulties getting the site to connect via frame to your Cisco HQ router. What is the most likely cause of the problem?()A、Mismatched LMI types.B、Incompatible encapsulation types.C、Mismatching IP addresses.D、Incorrect DLCI.E、None of the above

ou perform a security audit of a server named DC1. You install the Microsoft Network Monitor 3.0 application on DC1.You plan to capture all the LDAP traffic that comes to and goes from the server between 20:00 and 07:00 the next day and save it to the E:///data.cap file.You create a scheduled task. You add a new Start a program action to the task. You need to add theapplication name and the application arguments to the new action. What should you do?()A、Add nmcap.exe as the application name. Add the /networks * /capture LDAP /file e:/data.cap /stopwhen /timeafter 11hours line as arguments.B、Add netmon.exe as the application name. Add the /networks */capture LDAP /file e:/data.cap /stopwhen /timeafter 11hours line as arguments.C、Add nmcap.exe as the application name. Add the /networks * /capture !LDAP /file e:/data.cap /stopwhen /timeafter 11hours line as arguments.D、Add nmconfig.exe as the application name. Add the /networks * /capture LDAP /file e:/data.cap /stopwhen /timeafter 11hours line as arguments.

You work as the enterprise exchange administrator at TestKing.com. The TestKing.com network consistsof an Active Directory forest that contains a single domain named testking.com. TestKing.com has anExchange Server 2010 organization. For the future, you envisage to add a new domain to the forest as well as deploying the Exchange Server2010 servers in the domain. A TestKing.com employee named Andy Reid that is a member of an ActiveDirectory group. You have received instructions from the CIO to allow Andy Reid to install ExchangeServer 2010 servers in the new domain.  You thus nedd to identify the appropriate group to which AndyReid should be assigned()A、You should add Andy Reid to the Server Operators group.B、You should add Andy Reid to the Domain Admins group.C、You should add Andy Reid to the Enterprise Admins group.D、You should add Andy Reid to the Exchange Install Domain Servers group.

Which commands are required to properly configure a router to run OSPF and to add network 192.168.16.0/24 to OSPF area 0?()A、Router(config)#router ospf 1B、Router(config)#router ospf 0C、Router(config)#router ospf area 0D、Router(config-router)#network 192.168.16.0 0.0.0.255 area 0E、Router(config-router)#network 192.168.16.0 0.0.0.255 0F、Router(config-router)#network 192.168.16.0 255.255.255.0 area 0

A network administrator is trying to add a new router into an established OSPF network.The networks attached to the new router do not appear in the routing tables of the other OSPF routers.Given the information in the partial configuration shown below,what configuration error is causing this problem? ()Router(config)#router ospf 1Router(config-router)#network 10.0.0.0 255.0.0.0 area 0A、The process id is configured improperlyB、The OSPF area is configured improperlyC、The network wildcard mask is configured improperlyD、The network number is configured improperlyE、The AS is configured improperlyF、The network subnet mask is configuerd improperly

The Testking corporate LAN consists of one large flat network. You decide to segment this LAN into two separate networks with a router. What will be the affect of this change?()A、The number of broadcast domains will be decreased.B、It will make the broadcasting of traffic between domains more efficient between segments.C、It will increase the number of collisions.D、It will prevent segment 1's broadcasts from getting to segment 2.E、It will connect segment 1's broadcasts to segment 2.

You perform a security audit of a server named DC1. You install the Microsoft Network Monitor 3.0 application on DC1. You plan to capture all the LDAP traffic that comes to and goes from the server between 20:00 and 07:00 the next day and save it to the e:/data.cap file. You create a scheduled task. You add a new Start a program action to the task. You need to add the application name and the application arguments to the new action. What should you do?() A、 Add nmcap.exe as the application name. Add the /networks * /capture LDAP /file e:/data.cap / stopwhen /timeafter 11hours line as argumentsB、 Add netmon.exe as the application name. Add the /networks */capture LDA /file e:/data.cap /stopwhen / T.imeafter 11hours line as argumentsC、 Add nmcap.exe as the application name. Add the /networks * /capture !LDAP /file e:/data.cap /stopwhen /timeafter 11hours line as argumentsD、 Add nmconfig.exe as the application name. Add the /networks */capture LDAP /file e:/data.cap / stopwhen /timeafter 11hours line as arguments

You are the network administrator for Testking.com. The network consists of a single Active Directory forest that contains three domains. The functional level of the forest is Windows Server 2003. The domain names are testking.com, europe.testking.com, and asia.testking.com. Each domain contains 500 user accounts. TestKing.com is in the process of acquiring several other companies whose networks will be add to the testking.com Windows Server 2003 domain. These acquisitions will entail the addition of several new offices, which will be connected to TestKing's network by means of dedicated 56-Kbps WAN connections. You create a new shared folder named NewProjects on a file server in testking.com. Several users in each existing domain need access to the NewProjects folder. These users are not in the same group in any domain. All users who need access to the NewProjects folder must be able to add, delete, and modify files and folders in the NewProjects folder. Users in the acquired companies also will require access to this folder. You need to create the required Active Directory groups and configure the required permissions for the NewProjects folder. Your solution must minimize ongoing administrative effort as you add new companies to the network. You must also minimize unnecessary traffic across the WAN connections. What should you do?()A、Create a single universal security group. Add all users that require access to the folder to the group. Create a domain local group in the testking.com domain. Add the universal group to the domain local group. Assign permissions to the shared folder by using the domain local group.B、Create a global security group in each domain. Add all users that require access to the folder to the global group in their domain. Create a domain local group in testking.com domain. Add the global groups to the domain local group. Assign permissions to the shared folder by using the domain local group.C、Create a universal security group in each domain. Add all users that require access to the folder to the group in their domain. Assign permissions to the shared folder by using the universal groups.D、Create a global security group in each domain. Add all users that require access to the folder to the group in their domain. Assign permissions to the shared folder by using the global groups.

You are the network administrator for The network consists of a single Active Directory domain named All network servers run Windows Server 2003. A member server named TestKing17 hosts several shared folders. Users report that they receive an error message when they try to connect to the shared folders. The error message states: "No more connections can be made to this remote computer at this time because there are already as many connections as the computer can accept." How should you solve the problem?()A、Add an additional network adapter to TestKing17. Configure a network bridge between the new network adapter and the original network adapter.B、Purchase additional per-seat licenses for TestKing17. In Control Panel on TestKing17, run the Licensing application. Add the additional licenses to TestKing17.C、Disable quota management on TestKing17.D、In Active Directory Sites and Services, select the site that contains TestKing17. Add an additional Active Directory connection object to the domain controller for the site.

You are the network administrator for . The network consists of asingle Active Directory domain named. All network servers run Windows Server 2003. Terminal Services is installed on your network. You currently use a terminal server farm. Testking1, the first server in the farm, acts as the session directory server. All terminal servers are operating at maximum capacity. An increasing number of users report slow response times when they use these servers. You need to improve the performance of the terminal server farm. You plan to use a server named Testking4, which has hardware identical to that of the other terminal servers in the farm. First, you add Tesking4 to the Session Directory Computers group on Testking1. What should you do next?()A、Add Testking4 to the Session Directory Computers group on the PDC emulator.B、On Testking4, select the Terminal Services configuration option to join the existing session directory.C、On Testking4, install the Session Directory service.D、On Testking4, create a new session directory server.

You are the network administrator for TestKing.com Active Directory domain. The domain includes Windows Server 2003 domain controllers and Windows XP Professonal client computers. A new administrator named Sandra is hired to assist you in deploying Windows XP Professional to 100 new computers. Sandra installs the operating system on a new computer named TestKing11. However, when Sandra tries to log on to the domain from TestKing11, she is unsuccessful. The logon box does now allow her to view and select the domain name. You need to ensure that Sandra can log on to the domain from TestKing11. What should you do?()A、Enable the computer account for Testking11.B、Configure TestKing11 as a member of the domain.C、Add Sandra's user account to the Enterprise Admins group.D、Add Sandra's user account to the Server Operators group.

You perform a security audit of a server named DC1. You install the Microsoft Network Monitor 3.0 application on DC1.You plan to capture all the LDAP traffic that comes to and goes from the server between 20:00 and 07:00 the next day and save it to the E:/data.cap file.You create a scheduled task. You add a new Start a program action to the task.You need to add the application name and the application arguments to the new action.What should you do?()A、Add nmcap.exe as the application name. Add the /networks * /capture LDAP /file e:/data.cap / stopwhen / timeafter 11hours line as arguments.B、Add netmon.exe as the application name. Add the /networks */capture LDAP /file e:/data.cap / stopwhen / timeafter 11hours line as arguments.C、Add nmcap.exe as the application name. Add the /networks * /capture !LDAP /file e:/data.cap / stopwhen / timeafter 11hours line as arguments.D、Add nmconfig.exe as the application name. Add the /networks * /capture LDAP /file e:/data.cap / stopwhen / timeafter 11hours line as arguments.

单选题You work as the enterprise exchange administrator at TestKing.com. The TestKing.com network consistsof an Active Directory forest that contains a single domain named testking.com. TestKing.com has anExchange Server 2010 organization. For the future, you envisage to add a new domain to the forest as well as deploying the Exchange Server2010 servers in the domain. A TestKing.com employee named Andy Reid that is a member of an ActiveDirectory group. You have received instructions from the CIO to allow Andy Reid to install ExchangeServer 2010 servers in the new domain.  You thus nedd to identify the appropriate group to which AndyReid should be assigned()AYou should add Andy Reid to the Server Operators group.BYou should add Andy Reid to the Domain Admins group.CYou should add Andy Reid to the Enterprise Admins group.DYou should add Andy Reid to the Exchange Install Domain Servers group.

单选题You are the network administrator for TestKing.com. All network servers run Windows Server 2003. The network includes a file server named Testking1. Testking1 contains a single disk for system files and two SCSI hard disks that comprise a 72-GB mirrored volume with 65 GB of read-only data. Users connect to this data by using shortcuts on their desktops. Testking1 is scheduled for replacement. You have a scheduled maintenance window to complete this task. Before the maintenance window, you build a new server. You need to bring the new server online with current data and re-establish redundancy as quickly as possible. You must also ensure that the desktop shortcuts will continue to function. What should you do?()AName the new server Testking1. Create a new mirrored volume by using two 72-GB disks. Connect Testking2 to the network and copy the data from Testking1. When copying is complete, shut down the old Testking1.BName the new server Testking1. Move both disks from the old Testking1 to the new Testking1. Scan the disks for changes. Import the disks.Connect the new Testking1 to the network.CName the new server Testking1. Break the mirror on the old Testking1. Move one of the disks from the old Testking1 to the new Testking1. Scan the disk for changes. Initialize the disk. Select the spare disk and create the mirror. Connect the new Testking1 to the network.DName the new server Testking1. Remove one of the disks in the mirror from the old Testking1. Move the disk on the new Testking1. Scan the disk for changes. Import the disk, Shut down the old Testking1 and connect the new Testking1 to the network.

单选题A network administrator is trying to add a new router into an established OSPF network.The networks attached to the new router do not appear in the routing tables of the other OSPF routers.Given the information in the partial configuration shown below,what configuration error is causing this problem?() Router(config)#router ospf 1 Router(config-router)#network 10.0.0.0 255.0.0.0 area 0AThe process id is configured improperlyBThe OSPF area is configured improperlyCThe network wildcard mask is configured improperlyDThe network number is configured improperlyEThe AS is configured improperlyFThe network subnet mask is configuerd improperly

单选题You connect your computer to a wireless network. You discover that this new connection fails to show in the Connect to a network window.  You need to view this connection in the Connect to a network window.  What should you do?()AClick the Diagnose and repair link.BEnable the Turn on notification of new networks option.CConfigure the Connect to a network window to show all networks.DDisable the Connect automatically when this network is in range option, and then enable the Connect even if the network is not broadcasting option.

单选题You try to add a new router into the established Testking OSPF network. The networks attached to the new router do not appear in the routing tables of the other OSPF routers.The new router was configured for OSPF in the following way: Router(config)# router ospf 99 Router(config-if)# network 10.0.0.0 255.0.0.0 area 0 Based on this information, what is the most likely problem?()AThe process id is configured improperly.BThe OSPF area is configured improperly.CThe network wildcard mask is configured improperly.DThe network number is configured improperly.EThe AS is configured improperly.FThe network subnet mask is configured improperly.GAll of the above are likely problems.

单选题You are the network administrator at TestKing. TestKing has been provided withthe network address 165.100.27.0/24. The TestKing CEO wants to know how many subnetworks this address provides, and how many hosts can be supported on each subnet. What would your reply be?()AOne network with 254 hosts.B254 networks with 254 hosts per network.C65,534 networks with 255 hosts per network.D30 networks with 64 hosts per network.E254 networks with 65,534 per network.

单选题You are the network administrator for . All network servers run Windows Server 2003. The network includes a file server named TestKing17. TestKing17 contains a single disk for system files and two SCSI hard disks that comprise a 72-GB mirrored volume with 65 GB of read-only data. Users connect to this data by using shortcuts on their desktops. TestKing17 is scheduled for replacement. You have a scheduled maintenance window to complete this task. Before the maintainance window, you build a new server. You need to bring the new server online with current data and re-establish redundancy as quickly as possible. You must also ensure that the desktop shortcuts will continue to functions. What should you do?()AName the new server TestKing20. Create a new mirrored volume by using two 72-GB disks. Connect TestKing20 to the network and copy the data from TestKing17. When copying is complete, shut down the old TestKing17.BName the new server TestKing17. Move both disks from the old TestKing17 to the new TestKing17. Scan the disks for changes.Connect the new TestKing17 to the network.CName the new server TestKing17. Break the mirror on the old TestKing17. Move one of the disks from the old TestKing17 to the new TestKing17. Scan the disk for changes. Initialize the disk. Select the spare disk and create the mirror. Connect the new TestKing17 to the network.DName the new server TestKing17. Remove one of the disks in the mirror from the old TestKing17. Move the disk to the new TestKing17. Scan the disk for changes. Import the disk. Shut down the old TestKing17 and connect the new TestKing17 to the network.

单选题You need to upgrade the IOS of an existing router on your network. The new IOS image is located on a TFTP server that you have set up within the network. What command should you issue in order to download the new IOS version?()ARouter# copy tftp flashBRouter# copy flash runCRouter(config)# restore flashDRouter(config)# repair flashERouter#copy flash tftpFRouter# copy start flash

单选题A new router, named TK1, is being installed. You wish to add this router to your existing OSPF network. In doing so, you configure the following: TK1(config)# router ospf 1 TK1(config-router)# network 10.10.10.0 255.255.255.0 area 0 After making this change, you notice that the networks attached to TK1 are not being learned by the other OSPF routers. What could be the cause of this?()AThe AS is not correctly configuredBThe network subnet mask is incorrectly configuredCThe network wildcard mask is configured incorrectlyDThe network number is not correctly configuredEThe process id is configured incorrectlyFNone of the above