When is it necessary to use a public IP address on a routing interface?() A. Connect a router on a local network.B. Connect a router to another router.C. Allow distribution of routes between networks.D. Translate a private IP address.E. Connect a network to the Internet.
When is it necessary to use a public IP address on a routing interface?()
A. Connect a router on a local network.
B. Connect a router to another router.
C. Allow distribution of routes between networks.
D. Translate a private IP address.
E. Connect a network to the Internet.
相关考题：
Your network contains the servers configured as shown in the following table. Name Server role Private IP address Public IP address Server1Routing and Remote Access server192.168.1.1 131.107.0.1 Web1 Web server 192.168.1.2 ? Your company is assigned the public IP addresses from 131.107.0.1 to 131.107.0.31.You need to ensure that Web1 is accessible from the Internet by using https://131.107.0.2.What should you do from the Routing and Remote Access console？（）A. From the Static Routes node, configure a static route.B. From the server properties, configure SSL Certificate Binding.C. From the NAT interface, add an address pool and a reservation.D. From the NAT interface, configure the Secure Web Server (HTTPS) service.
When the Infranet Enforcer is set up in transparent mode, which additional resource policy must be configured to use OAC for IPsec enforcement? () A. IPsec RoutingB. Access ControlC. IP Address PoolD. Source Interface
What is the reason for configuring a passive interface on a router?() A. Allows interfaces to share common IP addresses.B. Allows an interface to remain up without the aid of keepalives.C. Allows a router to send routing and not receive updates via that interface.D. Allows a routing protocol to forward updates that is missing its IP address.E. Allows a router to receive routing updates on an interface but not send updates via that interface.
What does the ip access-routes configuration command accomplish?（）A、It statically places a host route in the routing table.B、It statically associates an IP address with a customer.C、It dynamically creates a host route in the routing table.D、It dynamically assigns an address to the router's interface
Which two statements are true about overflow pools？（）A、Overflow pools do not support PATB、Overflow pools can not use the egress interface IP address for NATC、Overflow pools must use PATD、Overflow pools can contain the egress interface IP address or separate IP addresses
You issue the command telnet interface ge-1/1/0 10.10.10.1 source 192.168.100.1 bypass-routing. Which statement is correct?（）A、The bypass-routing parameter is ignored when using private IP addressing.B、The telnet session will have the source IP address 10.10.10.1.C、The telnet session will connect to the neighboring device's interface ge-1/1/0.D、Return traffic for the telnet session might not arrive at interface ge-1/1/0.
Which two design recommendations are most appropriate when OSPF is the data center core routing protocol？ （）A、 Never use passive interfaces.B、 Use NSSA areas from the core down.C、 Use totally stub areas to stop type 3 LSAs.D、 Use the lowest Ethernet interface IP address as the router ID.E、 Tune OSPF timers to enable OSPF to achieve quicker convergence
What will happen if a private IP address is assigned to a public interface connected to an ISP?（）A、Addresses in a private range will be not routed on the Internet backbone.B、Only the ISP router will have the capability to access the public network.C、The NAT process will be used to translate this address in a valid IP address.D、Several automated methods will be necessary on the private network.E、A conflict of IP addresses happens, because other public routers can use the same range.
It has become necessary to configure an existing serial interface to accept a second Frame Relay virtualcircuit.Which of the following processes are required to accomplish this task？（）A、configure static frame relay map entries for each subinterface network.B、remove the ip address from the physical interfaceC、create the virtual interfaces with the interface commandD、configure each subinterface with its own IP addressE、disable split horizon to prevent routing loops between the subinterface networksF、encapsulate the physical interface with multipoint PPP
When is it necessary to use a public IP address on a routing interface?（）A、Connect a router on a local network.B、Connect a router to another router.C、Allow distribution of routes between networks.D、Translate a private IP address.E、Connect a network to the Internet.
Which two design recommendations are most appropriate when OSPF is the data center core routing protocol? （）A、Never use passive interfaces.B、Use NSSA areas from the core down.C、Use totally stub areas to stop type 3 LSAs.D、Use the lowest Ethernet interface IP address as the router ID.E、Tune OSPF timers to enable OSPF to achieve quicker convergence.
Select the two answers that best describe the IP Event Dampening feature（）A、The IP Event Dampening uses exponential decay mechanism to suppress the effects of excessive interface flappingB、BGP Operators use IP Event Dampening to suppress the effect of unstable internet RoutesC、The IP Event Dampening works with routing protocols by stopping the announcement of dampened interface subnets in their updatesD、When IP Event Dampened internet routes resch their re-use limit BGP installs them in the Routing Table and announces them to other BGP speakers
What is the reason for configuring a passive interface on a router?（）A、Allows interfaces to share common IP addresses.B、Allows an interface to remain up without the aid of keepalives.C、Allows a router to send routing and not receive updates via that interface.D、Allows a routing protocol to forward updates that is missing its IP address.E、Allows a router to receive routing updates on an interface but not send updates via that interface.
When configuring an interface using SMIT and Further Configuration with an IP address and netmask， which of the following outcomes indicates how the routing tables will be affected？（）A、A subnet route is automatically addedB、A default route is automatically addedC、All other routes are automatically addedD、The routing table is not affected
Which two statements are true about the primary address on an interface?（）A、It is the address used by default as the local address for broadcast and multicast packets sourced locally and sent out of the interface.B、You use the primary address when you have multiple IP addresses belonging to the same subnet on the same interface.C、It can be useful for selecting the local address used for packets sent out of unnumbered interfaces when multiple non-127 addresses are configured on the loopback interface.D、By default, the primary address on an interface is selected as the numerically highest local address configured on the interface.
When the Infranet Enforcer is set up in transparent mode, which additional resource policy must be configured to use OAC for IPsec enforcement? （）A、IPsec RoutingB、Access ControlC、IP Address PoolD、Source Interface
Which two statements are true about the primary address on an interface?（）A、It is the address used by default as the local address for broadcast and multicast packets sourced locally and sent out of the interfaceB、You use the primary address when you have multiple IP addresses belonging to the same subnet on the same interfaceC、It can be useful for selecting the local address used for packets sent out of unnumbered interfaces when multiple non-127 addresses are configured on the loopback interfaceD、By default, the primary address on an interface is selected as the numerically highest local address configured on the interface
When an SRX series device receives an ESP packet, what happens?（）A、If the destination address of the outer IP header of the ESP packet matches the IP address of the ingress interface, it willB、If the destination IP address in the outer IP header of ESP does not match the IP address of the ingress interface, it willC、If the destination address of the outer IP header of the ESP packet matches the IP address of the ingress interface, based packet.D、If the destination address of the outer IP header of the ESP packet matches the IP address of the ingress interface, based of inner header, it will decrypt the packet.
单选题When configuring an interface using SMIT and Further Configuration with an IP address and netmask， which of the following outcomes indicates how the routing tables will be affected？（）AA subnet route is automatically addedBA default route is automatically addedCAll other routes are automatically addedDThe routing table is not affected
单选题What will happen if a private IP address is assigned to a public interface connected to an ISP?（）AAddresses in a private range will be not routed on the Internet backbone.BOnly the ISP router will have the capability to access the public network.CThe NAT process will be used to translate this address in a valid IP address.DSeveral automated methods will be necessary on the private network.EA conflict of IP addresses happens, because other public routers can use the same range.
单选题When an SRX series device receives an ESP packet, what happens?（）AIf the destination address of the outer IP header of the ESP packet matches the IP address of the ingress interface, it willBIf the destination IP address in the outer IP header of ESP does not match the IP address of the ingress interface, it willCIf the destination address of the outer IP header of the ESP packet matches the IP address of the ingress interface, based packet.DIf the destination address of the outer IP header of the ESP packet matches the IP address of the ingress interface, based of inner header, it will decrypt the packet.
多选题Which two design recommendations are most appropriate when OSPF is the data center core routing protocol? （）ANever use passive interfaces.BUse NSSA areas from the core down.CUse totally stub areas to stop type 3 LSAs.DUse the lowest Ethernet interface IP address as the router ID.ETune OSPF timers to enable OSPF to achieve quicker convergence.
单选题Your network contains the servers configured as shown in the following table. Name Server role Private IP address Public IP address Server1Routing and Remote Access server192.168.1.1 131.107.0.1 Web1 Web server 192.168.1.2 ? Your company is assigned the public IP addresses from 131.107.0.1 to 131.107.0.31.You need to ensure that Web1 is accessible from the Internet by using https://131.107.0.2.What should you do from the Routing and Remote Access console？（）AFrom the Static Routes node, configure a static route.BFrom the server properties, configure SSL Certificate Binding.CFrom the NAT interface, add an address pool and a reservation.DFrom the NAT interface, configure the Secure Web Server (HTTPS) service.
单选题When is it necessary to use a public IP address on a routing interface?（）AConnect a router on a local network.BConnect a router to another router.CAllow distribution of routes between networks.DTranslate a private IP address.EConnect a network to the Internet.
多选题Which two statements are true about the primary address on an interface? （）AIt is the address used by default as the local address for broadcast and multicast packets sourced locally and sent out of the interfaceBYou use the primary address when you have multiple IP addresses belonging to the same subnet on the same intefaceCIt can be useful for selecting the local address used for packets sent out of unnumbered interfaces when multiple non-127 addresses are configured on the loopback interfaceDBy default, the primary address on an interface is selected as the nmerically highest local address configured on the interface
多选题Which two statements are true about the primary address on an interface?（）AIt is the address used by default as the local address for broadcast and multicast packets sourced locally and sent out of the interface.BYou use the primary address when you have multiple IP addresses belonging to the same subnet on the same interface.CIt can be useful for selecting the local address used for packets sent out of unnumbered interfaces when multiple non-127 addresses are configured on the loopback interface.DBy default, the primary address on an interface is selected as the numerically highest local address configured on the interface.
单选题You issue the command telnet interface ge-1/1/0 10.10.10.1 source 192.168.100.1 bypass-routing. Which statement is correct?（）AThe bypass-routing parameter is ignored when using private IP addressing.BThe telnet session will have the source IP address 10.10.10.1.CThe telnet session will connect to the neighboring device's interface ge-1/1/0.DReturn traffic for the telnet session might not arrive at interface ge-1/1/0.