What will happen if a private IP address is assigned to a public interface connected to an ISP?（）A、Addresses in a private range will be not routed on the Internet backbone.B、Only the ISP router will have the capability to access the public network.C、The NAT process will be used to translate this address in a valid IP address.D、Several automated methods will be necessary on the private network.E、A conflict of IP addresses happens, because other public routers can use the same range.
What will happen if a private IP address is assigned to a public interface connected to an ISP?（）
- A、Addresses in a private range will be not routed on the Internet backbone.
- B、Only the ISP router will have the capability to access the public network.
- C、The NAT process will be used to translate this address in a valid IP address.
- D、Several automated methods will be necessary on the private network.
- E、A conflict of IP addresses happens, because other public routers can use the same range.
相关考题：
Your network contains the servers configured as shown in the following table. Name Server role Private IP address Public IP address Server1Routing and Remote Access server192.168.1.1 131.107.0.1 Web1 Web server 192.168.1.2 ? Your company is assigned the public IP addresses from 131.107.0.1 to 131.107.0.31.You need to ensure that Web1 is accessible from the Internet by using https://131.107.0.2.What should you do from the Routing and Remote Access console？（）A. From the Static Routes node, configure a static route.B. From the server properties, configure SSL Certificate Binding.C. From the NAT interface, add an address pool and a reservation.D. From the NAT interface, configure the Secure Web Server (HTTPS) service.
In order for computers with private IP addresses to access the public Internet, which of thefollowing must the router perform?() A.NATB.BGPC.DHCPD.APIPA
Ezonexam is migrating to a private IP addressing scheme. Which of the following describe the use of private IP addresses? (Choose two)A．Addresses chosen by Ezonexam.com to communicate with the Internet.B．Addresses that cannot be routed through the public Internet.C．Addresses that can be routed through the public Internet.D．A scheme to conserve public addresses.E．Addresses licensed to enterprise or ISPs by an Internet registry organization.
When is it necessary to use a public IP address on a routing interface?() A. Connect a router on a local network.B. Connect a router to another router.C. Allow distribution of routes between networks.D. Translate a private IP address.E. Connect a network to the Internet.
What will happen if a private IP address is assigned to a public interface connected to an ISP?() A. Addresses in a private range will be not routed on the Internet backbone.B. Only the ISP router will have the capability to access the public network.C. The NAT process will be used to translate this address in a valid IP address.D. Several automated methods will be necessary on the private network.E. A conflict of IP addresses happens, because other public routers can use the same range.
What is the principle reason to use a private IP address on an internal network?() A. Subnet strategy for private companies.B. Manage and scale the growth of the internal network.C. Conserve public IP addresses so that we do not run out of them.D. Allow access reserved to the devices.
Which of the following describe private IP addresses?() A. addresses chosen by a company to communicate with the InternetB. addresses that cannot be routed through the public InternetC. addresses that can be routed through the public InternetD. a scheme to conserve public addressesE. addresses licensed to enterprises or ISPs by an Internet registry organization
Which of the following describe private IP addresses (Choose two.)()。 A.addresses chosen by a company to communicate with the InternetB.addresses that cannot be routed through the public InternetC.addresses that can be routed through the public InternetD.a scheme to conserve public addressesE.addresses licensed to enterprises or ISPs by an Internet registry organization
The LAN-side of the Teleworker router is assigned private IP address space (RFC1918), and the VPN topology is IPSec-only (no GRE protocol). When is it required to configure NAT/pNAT on the Teleworker router?（）A、when all access to the Internet is through the IPSec tunnelB、when there is direct Internet access via split-tunnelingC、when there is no Internet access configured through the Teleworker routerD、whenever you have IOS-Firewall (CBAC) configured
Your company has 250 client computers connected to the office LAN. The company has a pool of five public IP addresses. All client computers have dynamically assigned IP addresses. You need to provide all client computers with Internet access. What should you use？（）A、 DHCP Relay AgentB、 Routing Information Protocol （RIP）C、 Internet Group Management Protocol （IGMP）D、 Network Address Translation （NAT）/Basic Firewall
You have a server named Server2 that runs Windows Server 2003 Service Pack 2 (SP2). The server has two network connections named Local Area Connection and Internet Connection.You configure network address translation (NAT) on Server2 as shown in the exhibit. (Click the Exhibit button.) You configure all client computers to use Server2 as their default gateway.Users report that they cannot connect to the Internet. You successfully connect to the Internet from Server2.You need to ensure that client computers can access Internet resources. What should you do?（）A、Change the Internet Connection interface type to Basic firewall only. B、Change the Internet Connection interface type to Private interface connected to private network. C、Add Local Area Connection as a new interface for the NAT protocol and set the interface as a Public interface connected to the Internet. D、Add Local Area Connection as a new interface for the NAT protocol and set the new interface as a Private interface connected to private network.
Which of the following describe private IP addresses? (Choose two.)（）A、addresses chosen by a company to communicate with the InternetB、addresses that cannot be routed through the public InternetC、addresses that can be routed through the public InternetD、a scheme to conserve public addressesE、addresses licensed to enterprises or ISPs by an Internet registry organization
What is the principle reason to use a private IP address on an internal network?（）A、Subnet strategy for private companies.B、Manage and scale the growth of the internal network.C、Conserve public IP addresses so that we do not run out of them.D、Allow access reserved to the devices.
In any NAT (network address translation) configuration, what is the Inside Global IP address?（）A、The summarized address for all internal subnetted addresses.B、A private IP address assigned to a host on the inside network.C、A registered address that represents an inside host to an outside network.D、A unique IP address used on an internal networkE、Non of the above
When is it necessary to use a public IP address on a routing interface?（）A、Connect a router on a local network.B、Connect a router to another router.C、Allow distribution of routes between networks.D、Translate a private IP address.E、Connect a network to the Internet.
Which of the following describe private IP addresses?（）A、addresses chosen by a company to communicate with the InternetB、addresses that cannot be routed through the public InternetC、addresses that can be routed through the public InternetD、a scheme to conserve public addressesE、addresses licensed to enterprises or ISPs by an Internet registry organization
Which of the following describe private IP addresses?（）A、Addresses chosen by a company to communicate with the Internet.B、Addresses that cannot be routed through the public Internet.C、Addresses that can be routed through the public Internet.D、A scheme to conserve public addresses.E、Addresses licensed to enterprise or ISPs by an Internet registry organization.
In order for computers with private IP addresses to access the public Internet, which of thefollowing must the router perform?（）A、NATB、BGPC、DHCPD、APIPA
Which of the following features on a wireless router maps the private IP address to a public IPaddress?（）A、SSIDB、NATC、MAC filteringD、DHCP
Your network contains the servers configured as shown in the following table. Name Server role Private IP address Public IP address Server1Routing and Remote Access server192.168.1.1 131.107.0.1 Web1 Web server 192.168.1.2 ? Your company is assigned the public IP addresses from 131.107.0.1 to 131.107.0.31.You need to ensure that Web1 is accessible from the Internet by using https://131.107.0.2.What should you do from the Routing and Remote Access console？（）A、From the Static Routes node, configure a static route.B、From the server properties, configure SSL Certificate Binding.C、From the NAT interface, add an address pool and a reservation.D、From the NAT interface, configure the Secure Web Server (HTTPS) service.
You have a server that runs Windows Server 2003 Service Pack 2 (SP2). The server has the Routing and Remote Access service enabled and is configured as a network address translation (NAT) router. You need to view a list of the current sessions on the Routing and Remote Access server and the private and public IP addresses and ports that are being used. What should you do?（）A、Run Nbtstat CS.B、Run Netstat Cano.C、From the Routing and Remote Access snap-in， right-click NAT/Basic Firewall and select Export List.D、From the Routing and Remote access snap-in， right-click the interface connected to the Internet and click Show Mappings.
单选题What will happen if a private IP address is assigned to a public interface connected to an ISP?（）AAddresses in a private range will be not routed on the Internet backbone.BOnly the ISP router will have the capability to access the public network.CThe NAT process will be used to translate this address in a valid IP address.DSeveral automated methods will be necessary on the private network.EA conflict of IP addresses happens, because other public routers can use the same range.
多选题Which of the following describe private IP addresses? （）Aaddresses chosen by a company to communicate with the InternetBaddresses that cannot be routed through the public InternetCaddresses that can be routed through the public InternetDa scheme to conserve public addressesEaddresses licensed to enterprises or ISPs by an Internet registry organization
单选题What is the principle reason to use a private IP address on an internal network?（）ASubnet strategy for private companies.BManage and scale the growth of the internal network.CConserve public IP addresses so that we do not run out of them.DAllow access reserved to the devices.
多选题Which of the following describe private IP addresses? (Choose two.)（）Aaddresses chosen by a company to communicate with the InternetBaddresses that cannot be routed through the public InternetCaddresses that can be routed through the public InternetDa scheme to conserve public addressesEaddresses licensed to enterprises or ISPs by an Internet registry organization
多选题Which of the following describe private IP addresses?（）AAddresses chosen by a company to communicate with the Internet.BAddresses that cannot be routed through the public Internet.CAddresses that can be routed through the public Internet.DA scheme to conserve public addresses.EAddresses licensed to enterprise or ISPs by an Internet registry organization.
单选题When is it necessary to use a public IP address on a routing interface?（）AConnect a router on a local network.BConnect a router to another router.CAllow distribution of routes between networks.DTranslate a private IP address.EConnect a network to the Internet.