Refer to the exhibit. Which of these statements correctly describes the state of the switch once the boot process has been completed?() A.As FastEthernet0/12 will be the last to come up, it will not be blocked by STP.B.Remote access management of this switch will not be possible without configuration change.C.More VLANs will need to be created for this switch.D.The switch will need a different IOS code in order to support VLANs and STP.
Refer to the exhibit. Which of these statements correctly describes the state of the switch once the boot process has been completed?()
A.As FastEthernet0/12 will be the last to come up, it will not be blocked by STP.
B.Remote access management of this switch will not be possible without configuration change.
C.More VLANs will need to be created for this switch.
D.The switch will need a different IOS code in order to support VLANs and STP.
相关考题：
It has been over a century _______ the railway was completed. (A)when(B) once(C) which(D) since
in britain，the process of state-building has been one of evolution rather than revolution contrast to france and the us. ()
Refer to the exhibit. Which two statements are true?() A. DHCPDISCOVER packets will reach the DHCP server.B. The router will not forward DHCPDIS COVER packets because it has not been configured to do so.C. This configuration is applied to interface Fa0/1.D. DHCPDISCOVER packets will not reach the DHCP server because DHCPDISCOVER packets are broadcasts.E. DHCPDISCOVER packets will not reach the DHCP server because ports 67 and 68 have not been explicitly allowed by the ip forward - protocol command.F. This configuration is applied to interface Fa0/0.
Refer to the exhibit. All multilayer switches are running PIM dense mode. Recipient A and Recipient B are sending IGMPv2 joi n messages to their respective multilayer switches. Which statement is true?（）A. The Multicast Server is the root of the multicast tree. Switches 1, 3, 4, and 5 will participate in the multicast tree once pruning has taken place.B. The Multicast Serv er is the root of the multicast tree. Switches 4 and 5 will participate in the multicast tree once pruning has taken place.C. Switch 3 is the root of the multicast tree. Switches 3,4, and 5 will participate in the multicast tree once pruning has taken place.D. Switch 3 is the root of the multicast tree. Switches 1,3,4, and 5 will participate in the multicast tree once pruning has taken place.E. Switch 1 is the root of the multicast tree. Switches 1,4, and 5 will participate in the multicast tree once pruning has taken place.F. Switch 1 is the root of the multicast tree. Switches 1,3,4, and 5 will participate in the multicast tree once pruning has taken place.
Which term describes a spanning－tree network that has all switch ports in either the blocking or forwarding state?() A. redundantB. spannedC. provisionedD. converged
Refer to the exhibit. Switch port FastEthernet 0/24 on AlSwitch1 will be used to create an IEEE 802.1Q- complaint trunk to another switch. Based on the output shown, What is the reason the trunk does not form, even thought the proper cabling has been attached?（）A.VLANs have not been created yetB.An IP address must be configured for the portC.The port is currently configured for access modeD.The correct encapsulation type has not been configuredE.The no shutdown command has not been entered for the port
Refer to the exhibit. At the end of an RSTP election process, which access layer switch port will assume the discarding role?() A.Switch3, port fa0/1B.Switch3, port fa0/12C.Switch4, port fa0/11D.Switch4, port fa0/2E.Switch3, port Gi0/1F.Switch3, port Gi0/2
Refer to the exhibit. What switch proves the spanning－tree designated port role for the network segment that services the printers?() A.Switch1B.Switch2C.Switch3D.Switch4
Refer to the exhibit. Why has this switch not been elected the root bridge for VLAN1?() A.It has more than one interface that is connected to the root network segment.B.It is running RSTP while the elected root bridge is running 802.1d spanning tree.C.It has a higher MAC address than the elected root bridge.D.It has a higher bridge ID than the elected root bridge.
Refer to the exhibit. Based on the information given. Which switch will be elected root bridge and why?() A.Switch A ,because it has the lowest MAC addressB.Switch C,because it has the lowest priorityC.Switch B,because it has the highest MAC addressD.Switch C,because it is the most centrally located switchE.Switch A,because it is the most centrally located switchF.Switch D,because it has the highest priority
Refer to the exibit. Three cisco 2950 switches are set to their default priority sttings.During the spanningtree process,which switch will be elected as the root bridge?() A.Switch3B.Switch4C.Switch2D.Switch1
Which term describes a spanning-tree network that has all switch ports in either the blocking or forwardingstate？ （）A、redundantB、spannedC、provisionedD、converged
Which statement correctly describes network security settings in Cisco Network Assistant for the Catalyst Express 500 Switch？（）A、The LOW setting enables broadcast storm control， but has no effect on the number of devices that can connect to a switch portB、The LOW setting enables broadcast storm control and limits the number of devices that can connect to a switch port.C、The LOW setting disables broadcast storm control but limits the number of devices that can connect to a switch portD、The default network setting is "HIGH"
Which two of the following statements describe a routed switch port on a multilayer switch？（）A、Layer 2 switching and Layer 3 routing are mutually supported.B、The port will not be associated with any VLAN.C、The routed switch port supports VLAN subinterfaces.D、The routed switch port is used when a switch has only one port per VLAN or subnet.E、The routed switch port ensures that STP remains in the forwarding state.
Refer to the exhibit. The output that is shown is generated at a switch. Which three of these statements are true? （）A、All ports will be in a state of discarding, learning, or forwarding.B、Thirty VLANs have been configured on this switch.C、The bridge priority is lower than the default value for spanning tree.D、All interfaces that are shown are on shared media.E、All designated ports are in a forwarding state.F、The switch must be the root bridge for all VLANs on this switch.
Refer to the exibit. Three cisco 2950 switches are set to their default priority sttings.During the spanningtree process,which switch will be elected as the root bridge?（）A、Switch3B、Switch4C、Switch2D、Switch1
Which term describes a spanning-tree network that has all switch ports in either the blocking or forwarding state?（）A、redundantB、spannedC、provisionedD、converged
Which statement best describes what is depicted in the show command output？（）A、 IGMP snooping is not active for VLAN 120 because the IGMP feature has not been enabled on the switch with the feature igmp command.B、 The IGMP snooping querier for VLAN 120 is not in a running state because the Loopback interface configured with 1.1.1.1/32 is currently in a down state.C、 IGMP snooping has been disabled on the VLAN 120 SVI.D、 IGMP snooping has been disabled for VLAN 120 in VLAN configuration mode.E、 IGMP snooping is not active for VLAN 120 because VLAN 120 does not exist in the VLAN database.
Which one of the statements below correctly describes the Virtual Router Redundancy Protocol （VRRP）， which is being used in the Company network to provide redundancy？（）A、 A VRRP group has one active and one or more standby virtual routers.B、 A VRRP group has one master and one or more backup virtual routers.C、 A VRRP group has one master and one redundant virtual router.D、 None of the other alternatives apply
单选题Refer to the exhibit. At the end of an RSTP election process, which access layer switch port will assume the discarding role?（）A Switch3, port fa0/1B Switch3, port fa0/12C Switch4, port fa0/11D Switch4, port fa0/2E Switch3, port Gi0/1F Switch3, port Gi0/2
单选题Refer to the exhibit. Which of these statements correctly describes the state of the switch once the boot process has been completed?（）A As FastEthernet0/12 will be the last to come up, it will not be blocked by STP.B Remote access management of this switch will not be possible without configuration change.C More VLANs will need to be created for this switch.D The switch will need a different IOS code in order to support VLANs and STP.
单选题Refer to the exhibit. What is the effect on the trust boundary of configuring the command mls qos trust cos on the switch port that is connected to the IP phone？（）A Effectively the trust boundary has been moved to the IP phone.B The host is now establishing the CoS value and has effectively become the trust boundary. C The switch is rewriting packets it receives from the IP phone and determining the CoS value. D The switch will no longer tag incoming voice packets and will trust the distribution layer switch to set theCoSE RTP will be used to negotiate a CoS value based upon bandwidth utilization on the link.
单选题Which statement describes a spanning-tree network that has converged?（）AAll switch and bridge ports are in the forwarding state.BAll switch and bridge ports are assigned as either root or designated ports.CAll switch and bridge ports are in either the forwarding or blocking state.DAll switch and bridge ports are either blocking or looping.
单选题Which one of the statements below correctly describes the Virtual Router Redundancy Protocol （VRRP）， which is being used in the Company network to provide redundancy？（）A A VRRP group has one active and one or more standby virtual routers.B A VRRP group has one master and one or more backup virtual routers.C A VRRP group has one master and one redundant virtual router.D None of the other alternatives apply
单选题Which statement best describes what is depicted in the show command output？（）A IGMP snooping is not active for VLAN 120 because the IGMP feature has not been enabled on the switch with the feature igmp command.B The IGMP snooping querier for VLAN 120 is not in a running state because the Loopback interface configured with 1.1.1.1/32 is currently in a down state.C IGMP snooping has been disabled on the VLAN 120 SVI.D IGMP snooping has been disabled for VLAN 120 in VLAN configuration mode.E IGMP snooping is not active for VLAN 120 because VLAN 120 does not exist in the VLAN database.
单选题Which statement correctly describes network security settings in Cisco Network Assistant for the Catalyst Express 500 Switch？（）AThe LOW setting enables broadcast storm control， but has no effect on the number of devices that can connect to a switch portBThe LOW setting enables broadcast storm control and limits the number of devices that can connect to a switch port.CThe LOW setting disables broadcast storm control but limits the number of devices that can connect to a switch portDThe default network setting is HIGH
多选题Which two of the following statements describe a routed switch port on a multilayer switch？（）ALayer 2 switching and Layer 3 routing are mutually supported.BThe port will not be associated with any VLAN.CThe routed switch port supports VLAN subinterfaces.DThe routed switch port is used when a switch has only one port per VLAN or subnet.EThe routed switch port ensures that STP remains in the forwarding state.