What is the function of the command switchport trunk native vlan 999 on a Cisco Catalyst switch()。 A.It creates a VLAN 999 interface.B.It designates VLAN 999 for untagged traffic.C.It blocks VLAN 999 traffic from passing on the trunk.D.It designates VLAN 999 as the default for all unknown tagged traffic.

What is the function of the command switchport trunk native vlan 999 on a Cisco Catalyst switch()。

A.It creates a VLAN 999 interface.

B.It designates VLAN 999 for untagged traffic.

C.It blocks VLAN 999 traffic from passing on the trunk.

D.It designates VLAN 999 as the default for all unknown tagged traffic.


相关考题:

如下图所示,3com和Cisco公司的交换机相互连接,在两台交换机之间需传输ULANID为1、10、20和30的4个VLAN信息,Catalyst 3548交换机VLAN Trunk的正确配置是A.Switch-3548 (config-if) #switchport trunk encapsulation dot 1 q Switch-3548 (config-if) #switchport trunk allowed vlan 1,10,20,30B.Switch-3548 (config-if) #switchport mode trunk Switch-3548 (config-if) #switchport trunk encapsulation isl Switch-3548 (config-if) #switchport trunk allowed vlan 1-30C.Switch-3548 (config-if) #switchport mode trunk Switch-3548 (config-if) #switchport trunk encapsulation negotiate Switch-3548 (config-if) #switchport trunk allowed vlan 1-30D.Switch-3548 (config-if) #switchport mode trunk Switch-3548 (config-if) #switchport trunk encapsulation dot 1q Switch-3548 (config-if) #switchport trunk allowed vlan 1,10,20,30

The Ezonexam network administrator has just issued the "switchport trunk native vlan 998" command on switch VE2. What is the function of this command?A.It designates VLAN 998 as the default for all unknown tagged trafficB.It designates VLAN 998 for untagged trafficC.It blocks VLAN 998 traffic from passing on the trunkD.It creates a VLAN 998 interfaceE.None of the above

You are bringing up a new Ezonexam switch, and wish to connect it via a trunk to another switch from a different vendor, which uses the IEEE standard for the trunking method. When setting the encapsulation type on the trunk, what should you configure on the Cisco switch?A.Switch(config)# switchport trunk encapsulation islB.Switch(config)# switchport trunk encapsulation ietfC.Switch(config-if)# switchport trunk encapsulation islD.Switch(config-if)# switchport trunk encapsulation ietfE.Switch(config-if)# switchport trunk encapsulation dot1q

Which interface commands would you enter on a Catalyst 2900 switch, if your goal was to bring all VLAN traffic to another directly connected switch?() A. Switch(config-if)# vlan allB. Switch(config-if)# switchport trunk encapsulation dot1qC. Switch(config-if)# switchport access vlan allD. Switch(config-if)# switchport mode trunkE. Switch(config-if)# switchport access vlan 303

You are bringing up a new Cisco Catalyst switch, and wish to connect it via a trunk to another switch from a different vendor, which uses the IEEE standard for the trunking method.When setting the encapsulation type on the trunk, what should you configure on the Cisco switch?()A. Switch(config)# switchport trunk encapsulation islB. Switch(config)# switchport trunk encapsulation ietfC. Switch(config-if)# switchport trunk encapsulation islD. Switch(config-if)# switchport trunk encapsulation ietfE. Switch(config-if)# switchport trunk encapsulation dot1q

An administrator is unsuccessful in adding VLAN 50 to aswitch. While troubleshooting the problem, the administrator views the output of the show vtp status command, which is displayed in the graphic. What commands must be issued on this switch to add VLAN 50 to the database?()A. Switch(config-if)# switchport access vlan 50B. Switch(vlan)# vtp serverC. Switch(config)# config-revision 20D. Switch(config)# vlan 50 name TechE. Switch(vlan)# vlan 50F. Switch(vlan)# switchport trunk vlan 50

What is the function of the command switchport trunk native vlan 999 on a?() A.It designates VLAN 999 for untagged traffic.B.It blocks VLAN 999 traffic from passing on the trunk.C.It creates a VLAN 999 interface.D.It designates VLAN 999 as the default for all unkown tagged traffic.

You are configuring a Cisco multilayer switch for the Company network.  Which command would  you use to configure a port to act as a routed interface?()A、 ip routingB、 switchport mode trunkC、 no switchportD、 switchport trunk native vlan 1E、 None of the other alternatives apply

A new Company switch was just configured using the "switchport trunk native vlan 7" command.   What does this interface command accomplish?()A、 Causes the interface to apply ISL framing for traffic on VLAN 7B、 Configures the trunking interface to forward traffic from VLAN 7C、 Configures the interface to be a trunking port and causes traffic on VLAN 7 to be 802.1q taggedD、 Configures the trunking interface to send traffic from VLAN 7 untaggedE、 None of the other alternatives apply

What is the effect of applying the switchport trunk encapsulation dot1q command to a port on a Cisco Catalyst switch?()A、By default, native VLAN packets going out this port will be tagged.B、Without an encapsulation command, 802.1Q will be the default encapsulation if DTP fails to negotiate a trunking protocol.C、The interface will support the reception of tagged and untagged traffic.D、If the device connected to this port is not 802.1Q-enabled, it will not be able to handle 802.1Q packets.

What is the function of the command switchport trunk native vlan 999 on a?()A、It designates VLAN 999 for untagged traffic.B、It blocks VLAN 999 traffic from passing on the trunk.C、It createsa VLAN 999 interface.D、It designates VLAN 999 as the default for all unkown tagged traffic.

Which interface commands would you enter on a Catalyst 2900 switch, if your goal was to bring all VLAN traffic to another directly connected switch?()A、Switch(config-if)# vlan allB、Switch(config-if)# switchport trunk encapsulation dot1qC、Switch(config-if)# switchport access vlan allD、Switch(config-if)# switchport mode trunkE、Switch(config-if)# switchport access vlan 303

A new switch is installed into an existing LAN and a new VTP trunk is set up with an existing switch. Which VLANs will be allowed on this new trunk?()A、All defined VLANs are allowed on the trunk by default.B、Each VLAN, or VLAN range, that is specified with the switchport mode command.C、Each VLAN, or VLAN range, that is specified with the vtp domain command.D、Each VLAN, or VLAN range, that is specified with the vlan database command.

在交换机的配置中,能够正确地将NativeVLAN设置为VLAN5的命令是()。A、switchport native vlan 5B、switchport trunk native 5C、switchport native trunk vlan 5D、switchport trunk native vlan 5

把VLAN20从中继链路中删除的命令是()A、switch(config-if)#switchport trunk vlan remove 20B、switch(config-if)#switchport trunk allowed vlan remove 20C、switch(config)#switchport trunk vlan remove 20D、switch(config)#switchport trunk allowed vlan pruning 20

You are bringing up a new Cisco Catalyst switch, and wish to connect it via a trunk to another switch from a different vendor, which uses the IEEE standard for the trunking method. When setting the encapsulation type on the trunk, what should you configure on the Cisco switch?()A、Switch(config)# switchport trunk encapsulation islB、Switch(config)# switchport trunk encapsulation ietfC、Switch(config-if)# switchport trunk encapsulation islD、Switch(config-if)# switchport trunk encapsulation ietfE、Switch(config-if)# switchport trunk encapsulation dot1q

What is the function of the no switchport catalyst switch interface configuration command?()A、Disables the interfaces to prevent traffic flowB、Clears all the configurations on the interfaceC、Switches the port from access mode to trunk modeD、Converts the port from physical Layer 2 port to physical Layer 3 port

What is the function of the command switchport trunk native vlan 999 on a switch?()A、It designates VLAN 999 for untagged traffic.B、It blocks VLAN 999 traffic from passing on the trunk.C、It creates a VLAN 999 interface.D、It designates VLAN 999 as the default for all unkown tagged traffic.

Which command alone will disable trunking on a Layer 2 switch port?()A、no switchport trunk native vlan vlan-idB、switchport nonegotiateC、no switchport mode dynamic desirableD、switchport mode access

What is the function of the command switchport trunk native vlan 999 on a Cisco Catalyst switch()。A、It creates a VLAN 999 interface.B、It designates VLAN 999 for untagged traffic.C、It blocks VLAN 999 traffic from passing on the trunk.D、It designates VLAN 999 as the default for all unknown tagged traffic.

单选题A new Company switch was just configured using the "switchport trunk native vlan 7" command.   What does this interface command accomplish?()A Causes the interface to apply ISL framing for traffic on VLAN 7B Configures the trunking interface to forward traffic from VLAN 7C Configures the interface to be a trunking port and causes traffic on VLAN 7 to be 802.1q taggedD Configures the trunking interface to send traffic from VLAN 7 untaggedE None of the other alternatives apply

单选题You are bringing up a new Cisco Catalyst switch, and wish to connect it via a trunk to another switch from a different vendor, which uses the IEEE standard for the trunking method. When setting the encapsulation type on the trunk, what should you configure on the Cisco switch?()ASwitch(config)# switchport trunk encapsulation islBSwitch(config)# switchport trunk encapsulation ietfCSwitch(config-if)# switchport trunk encapsulation islDSwitch(config-if)# switchport trunk encapsulation ietfESwitch(config-if)# switchport trunk encapsulation dot1q

单选题What is the function of the command switchport trunk native vlan 999 on a?()AIt designates VLAN 999 for untagged traffic.BIt blocks VLAN 999 traffic from passing on the trunk.CIt createsa VLAN 999 interface.DIt designates VLAN 999 as the default for all unkown tagged traffic.

单选题What is the function of the command switchport trunk native vlan 999 on a Cisco Catalyst switch()。AIt creates a VLAN 999 interface.BIt designates VLAN 999 for untagged traffic.CIt blocks VLAN 999 traffic from passing on the trunk.DIt designates VLAN 999 as the default for all unknown tagged traffic.

单选题You are configuring a Cisco multilayer switch for the Company network.  Which command would  you use to configure a port to act as a routed interface?()A ip routingB switchport mode trunkC no switchportD switchport trunk native vlan 1E None of the other alternatives apply

单选题What is the function of the command switchport trunk native vlan 999 on a switch?()AIt designates VLAN 999 for untagged traffic.BIt blocks VLAN 999 traffic from passing on the trunk.CIt creates a VLAN 999 interface.DIt designates VLAN 999 as the default for all unkown tagged traffic.

单选题Which command alone will disable trunking on a Layer 2 switch port?()Ano switchport trunk native vlan vlan-idBswitchport nonegotiateCno switchport mode dynamic desirableDswitchport mode access

单选题What is the effect of applying the switchport trunk encapsulation dot1q command to a port on a Cisco Catalyst switch?()ABy default, native VLAN packets going out this port will be tagged.BWithout an encapsulation command, 802.1Q will be the default encapsulation if DTP fails to negotiate a trunking protocol.CThe interface will support the reception of tagged and untagged traffic.DIf the device connected to this port is not 802.1Q-enabled, it will not be able to handle 802.1Q packets.