单选题A production system needs to be upgraded from AIX V5.1 to AIX V5.2. All logs and users need to be saved. Which installation method will accomplish the upgrade？（）AUpdate InstallationBMigration InstallationCPreservation InstallationDNew and Complete Overwrite Installation
单选题
A production system needs to be upgraded from AIX V5.1 to AIX V5.2. All logs and users need to be saved. Which installation method will accomplish the upgrade？（）
A
Update Installation
B
Migration Installation
C
Preservation Installation
D
New and Complete Overwrite Installation
参考解析
解析：
暂无解析
相关考题：
A customer would like to convert their existing IBM System Storage DS8100 to a DS8700 to gain more capacity. During the TDA review the impact on the running production environment during conversion is discussed. Which of the following must be considered?（）A. DS8000 model conversions are generally non-disruptiveB. a model conversion from DS8100 to DS8700 is disruptiveC. the DS8100 base frame needs to be sent back to the factory for upgradeD. during model conversion the logical configuration can be kept, but the system must be rebooted
An AIX system administrator needs to adjust the maximum amount of memory that can be pinned. Which of the following commands is used to make the change？（）A、 vmtune -MB、 svmon -mC、 vmstat -sD、 schedtune -m
A customer needs a very small AIX system to run their new application and is considering a 1-way p615. What key information should the pSeries technical specialist provide to the customer？（）A、The 1-way p615 cannot be upgraded to a 2-way p615.B、The 1-way p615 can be upgraded to a 2-way p615 should additional capacity be required.C、The p615 can be upgraded to a POWER5-based processor.D、The p615 is not a good solution， as it does not take advantage of the Advanced POWER Virtualization features.
A system must be upgraded from AIX 5.1 to 5.2. Which of the following scheduling processes should be performed? （）A、 Schedule enough down time to backup, upgrade and reboot. B、 Backup, upgrade, then schedule enough down time to reboot the system. C、 Backup, then schedule enough down time to upgrade and reboot the system. D、 No scheduling processes are necessary because no down time is required.
Which command is used to switch from AIX to the System V printing subsystem on AIX 5L Version 5.1?（）A、 switch.prt -s AIX B、 switch.prt -s SystemV C、 switch.prt -d AIX D、 switch.prt -d SystemV
An administrator has a server that must be upgraded from AIX 5.2 to AIX 5.3. The administrator also needs to use the 64-bit kernel with JFS2 filesystems in rootvg. All critical data resides in a non-rootvg volume group. Which of the following types of install could the administrator use to accomplish this（）A、Migration InstallationB、Update.AII InstallationC、Preservation InstallationD、New and Complete Overwrite Installation
Which of the following versions of AIX provide both multi-path I/O and dynamic LPAR？（）A、AIX V5.2B、AIX V4.2C、AIX V4.3D、AIX V5.1
A production system needs to be upgraded from AIX V5.2 to AIX V5.3. All system logs and users need to be saved. Which installation method will accomplish the upgrade（）A、Update InstallationB、Migration InstallationC、Preservation InstallationD、Mirror rootvg prior to a Preservation Installation
A system administrator has just finished upgrading a system to AIX 5.2. If there are future problems， the system administrator would like to add an entry to the AIX errorlog to record this event. Which of the following commands can be issued for this purpose？（）A、/usr/bin/errmsg "System upgraded to AIX 5.2"B、/usr/bin/errlog "System upgraded to AIX 5.2"C、/usr/bin/errupdate "System upgraded to AIX 5.2"D、/usr/bin/errlogger "System upgraded to AIX 5.2"
New AIX systems arrive without a CDROM drive. All systems do not have the system hardware configuration. Which of the following options is the most appropriate way to install AIX on the systems?（）A、Install CDROM drives or tape drives on the systems because that is the only way to install AIX.B、Install one system. Take a mksysb from the first system and resotre the mksysb to the remaining systems.C、Install one system. Mirror rootvg onto a disk from each of the remaining systems.D、Setup and NIM master and resources.
The administrator of an AIX system needs to be more proactive and predictive at identifying and resolving problems before they affect the system. Which of the following options should the pSeries Sales Representative propose to address this management issue？（）A、HACMPB、PM/AIXC、SmoothStartD、Business Continuity Services
A customer needs a system supporting four partitions， each with the following requirements： ？ 0.6 1.65GHz processors ？ 2GB memory ？ AIX 5.2 They also need the ability to grow the system in the future. Which pSeries system would be positioned best to meet this customer’s requirements？（）A、p5-550 with the Advanced POWER Virtualization feature and AIX 5.2B、p5-550 with the POWER5 processor technology and AIX 5.2C、p5-570 with the Advanced POWER Virtualization feature and AIX 5.3D、p5-570 with the POWER5 processor technology and AIX 5.2
A system administrator needs to quickly migrate a machine from AIX 5.1 to AIX 5.2. The administrator will only be allowed enough downtime to reboot the machine. Which installation method should be used to accomplish this task？（）A、Perform a migration installation during the reboot process.B、Perform an alternate disk installation and migration using NIM.C、Copy the /usr directory from another 5.2 server to this server.D、Perform an update_all install from 5.2 media to take effect on reboot.
The account team designed a p5-570 solution to strategically position the customer for future IBM announcements. The customer was dissatisfied upon implementing the solution. An AIX v5.1 partition was added to the requirements halfway through the solution design process and it was not considered in the final design. What should the pSeries technical specialist have done to prevent this situation？（）A、Submitted an RPQ （Request for Quote） for AIX v5.1 support on a p5-570B、Designed a p670 because it supports AIX 5.1 partitionsC、Initially designed a solution supporting AIX 5.1 partitionsD、Gained customer approval for the final design prior to ordering the system
A customer has a pSeries that needs to be upgraded from AIX Version 5.1 to AIX Version 5.2. The customer wants to retain /etc/passwd. Which of the following installation types should be used？（）A、Preservation InstallB、Retention InstallC、Overwrite InstallD、Migration Install
A System p administrator needs to upgrade a system from AIX 5.2 to AIX 5.3. Which of the following installation methods would minimize downtime（）A、Migration installationB、Partition MobilityC、alt_disk_installD、update_all smit fastpath and reboot during the next scheduled outage
单选题A System p administrator needs to upgrade a system from AIX 5.2 to AIX 5.3. Which of the following installation methods would minimize downtime（）AMigration installationBPartition MobilityCalt_disk_installDupdate_all smit fastpath and reboot during the next scheduled outage
单选题An AIX system administrator needs to adjust the maximum amount of memory that can be pinned. Which of the following commands is used to make the change？（）A vmtune -MB svmon -mC vmstat -sD schedtune -m
单选题A customer needs a very small AIX system to run their new application and is considering a 1-way p615. What key information should the pSeries technical specialist provide to the customer？（）AThe 1-way p615 cannot be upgraded to a 2-way p615.BThe 1-way p615 can be upgraded to a 2-way p615 should additional capacity be required.CThe p615 can be upgraded to a POWER5-based processor.DThe p615 is not a good solution， as it does not take advantage of the Advanced POWER Virtualization features.
单选题A customer needs a system supporting four partitions， each with the following requirements： ？ 0.6 1.65GHz processors ？ 2GB memory ？ AIX 5.2 They also need the ability to grow the system in the future. Which pSeries system would be positioned best to meet this customer’s requirements？（）Ap5-550 with the Advanced POWER Virtualization feature and AIX 5.2Bp5-550 with the POWER5 processor technology and AIX 5.2Cp5-570 with the Advanced POWER Virtualization feature and AIX 5.3Dp5-570 with the POWER5 processor technology and AIX 5.2
单选题A system administrator has a mksysb on tape of an AIX 5.2 machine and needs to install it on a different server. How can this be accomplished？（）AInstall the base AIX from 5.2 media and then install the mksysb overtop.BMount the tape and use the tar command to install AIX and the rest of the contents of the rootvg.CInsert the mksysb tape and a 5.2 base media CD and then boot to maintenance mode and initiate the install.DInstall AIX 5.2 from base media and then perform an update_all install from the mksysb tape of the original machine.
单选题A system administrator has just finished upgrading a system to AIX 5.2. If there are future problems， the system administrator would like to add an entry to the AIX errorlog to record this event. Which of the following commands can be issued for this purpose？（）A/usr/bin/errmsg System upgraded to AIX 5.2B/usr/bin/errlog System upgraded to AIX 5.2C/usr/bin/errupdate System upgraded to AIX 5.2D/usr/bin/errlogger System upgraded to AIX 5.2
单选题A system must be upgraded from AIX 5.1 to 5.2. Which of the following scheduling processes should be performed? （）A Schedule enough down time to backup, upgrade and reboot. B Backup, upgrade, then schedule enough down time to reboot the system. C Backup, then schedule enough down time to upgrade and reboot the system. D No scheduling processes are necessary because no down time is required.
单选题A system administrator has just migrated a system from AIX V.4 x to Aix V5.x. The system is up and running and appears to be functioning properly. The following error message was received when running lppchk -v bos.rte V =4 R is 4 bos.rte V5 bos.rte not installed. 5.1.0 lslpp -l | grep bos.rte shows 5.1.0 Which of the following options is the most likely solution to this problem?（）Abos.rte is corrupted and needs to be reinstalled.BThe system administration needs to reboot the system.CThe /root part of bos.rte was installed but not the user part. Reinstall the missing software.DThe update CD needs to be applied with the smitty update_all command.
单选题A system administrator will be migrating a server from AIX 5.1 to AIX 5.2 and is uncertain if the application running on the server will function properly after the migration. What is the fastest way to return to the previous AIX level if the application does not work？（）AUse base media to restore system to AIX 5.1.BUse an alt_disk_install and boot back to the AIX 5.1 rootvg.CMake a mksysb of the original AIX to restore back to the AIX 5.1 level.DPerform the AIX 5.2 upgrade using update_all with the commit option and reject filesets to return to AIX 5.1.
单选题Which command is used to switch from AIX to the System V printing subsystem on AIX 5L Version 5.1?（）A switch.prt -s AIX B switch.prt -s SystemV C switch.prt -d AIX D switch.prt -d SystemV
单选题An administrator has received an update CD with the latest technology level for AIX 5.3. The current operating system level of the server is at base AIX 5.3. What action needs to be taken to apply the new technology level to the server？（）ARun smit update_allBRun smit install_allCBoot from the installation mediaDRun the update_all command from the mounted CD
单选题A production system needs to be upgraded from AIX V5.1 to AIX V5.2. All logs and users need to be saved. Which installation method will accomplish the upgrade？（）AUpdate InstallationBMigration InstallationCPreservation InstallationDNew and Complete Overwrite Installation