A router is running BGP and receives more than one route for a particular prefix. Assume all the routes for this prefix have the same attributes. Which three path features would be reasons be for the rou ter to ignore some of the routes and not consider them as candidates for the best path?（）A、paths from an internal BGP (iBGP) neighbor if the local autonomous system (AS) appears in the AS_PATHB、paths for which the NEXT_HOP is inaccess ibleC、paths from an external BGP (eBGP) neighbor if the local autonomous system (AS) appears in the AS_PATHD、paths for which the NEXT_HOP is accessibleE、paths that are marked as synchronized in the show ip bgp outputF、paths that are marked as not synchronized in the show ip bgp output
A router is running BGP and receives more than one route for a particular prefix. Assume all the routes for this prefix have the same attributes. Which three path features would be reasons be for the rou ter to ignore some of the routes and not consider them as candidates for the best path?（）
- A、paths from an internal BGP (iBGP) neighbor if the local autonomous system (AS) appears in the AS_PATH
- B、paths for which the NEXT_HOP is inaccess ible
- C、paths from an external BGP (eBGP) neighbor if the local autonomous system (AS) appears in the AS_PATH
- D、paths for which the NEXT_HOP is accessible
- E、paths that are marked as synchronized in the show ip bgp output
- F、paths that are marked as not synchronized in the show ip bgp output
相关考题：
清空某台Cisco路由器NVRAM中的全部配置信息，正确的配置操作是______。A．Router(config)#clear running-configB．Router#wirte eraseC．Router(config)#erase running-configD．Router#erase running-config
A router is running BGP and receives more than one route for a particular prefix. Assume all the routes for this prefix have the same attributes.Which three path features would be reasons be for the rou ter to ignore some of the routes and not consider them as candidates for the best path?（）A. paths from an internal BGP (iBGP) neighbor if the local autonomous system (AS) appears in the AS_PATHB. paths for which the NEXT_HOP is inaccess ibleC. paths from an external BGP (eBGP) neighbor if the local autonomous system (AS) appears in the AS_PATHD. paths for which the NEXT_HOP is accessibleE. paths that are marked as synchronized in the show ip bgp outputF. paths that are marked as not synchronized in the show ip bgp output
Based on the show ip bgp summary output, which two statements are true?() A. The BGP session to the 10.3.3.3 neighbor is established, but the router has not received any BGP routing updates from the 10.3.3.3 neighbor.B. The router is attempting to establish a BGP peering session with the 10.2.2.2 neighbor.C. The router is attempting to establish a BGP peering session with the 10.1.1.1 neighbor.D. The BGP session to the 10.3.3.3 neighbor is established.E. The BGP session to the 10.2.2.2 neighbor is established.F. The BGP session to the 10.1.1.1 neighbor is established.
Refer to the exhibit. On the basis of the configuration that is provided, how would the BGP updates that come from router R1 be replicated inside autonomous system 65200?() A. All BGP updates that are received on router R 2 will be sent to routers R3 and R4. Routers R3 and R4 will then forward those BGP updates to router R5B. None of the BGP updates that are received on router R2 will ever be received by router R5C. All BGP updates that are received on router R2 will not be sent to routers R3 and R4D. All BGP updates that are received on router R2 will be sent directly to router R5
TFTP服务器中（）？A、Router#copy startup-config tftpB、Router#copy flash tftpC、Router#copy running-config tftpD、Router#copy tftp running-config
In BGP routing，what does the rule of synchronization mean？（）A、A BGP router can only advertise an EBGP learned route，provided that the route is an IGP route in the routing table.B、A BGP router can only advertise an IBGP learned route，provided that the route is an IGP route in the routing table.C、A BGP router can only advertise an IBGP learned route，provided that the route is an IGP route that is not in the routing table.D、A BGP router can only advertise an EBGP learned route，provided that the route is a metric of 0 in the BGP table.
You issue the command show process memory ∣ include BGP and notice that BGP is consuming alarge percentage of the router’s memory. Which of the following steps would result in lowering theamount of memory being consumed by BGP？（Choose all that apply.）（）A、Filter unneeded BGP routesB、Run BGP on a different platform that already has more memoryC、Upgrade the router memoryD、Increase the BGP update timerE、Compress the BGP tableF、Use a default route instead of maintaining a full BGP table
You have a router running BGP for the MPLS network and OSPF for the local LAN network at the sales office. A route is being learned from the MPLS network that also exists on the OSPF local network. It is important that the router chooses the local LAN route being learned from the downstream switch running OSPF rather than the upstream BGP neighbor. Also， if the local OSPF route goes away， the BGP route needs to be used. What should be configured to make sure that the router will choose the LAN network as the preferred path？（）A、static route needs to be addedB、floating static route needs to be addedC、bgp backdoor commandD、ospf backdoor command
Which set of configuration commands configures MBGP on the ERX Edge Router?（）A、router bgp 100 neighbor 192.168.10.1 remote-as 200 address-family ipv4 multicast neighbor 192.168.10.1 next-hop-selfB、router bgp 100 neighbor 192.168.10.1 remote-as 200 address-family vpnv4 multicast neighbor 192.168.10.1 activateC、router bgp 100 neighbor 192.168.10.1 remote-as 200 address-family ipv4 unicast neighbor 192.168.10.1 activeD、router bgp 100 neighbor 192.168.10.1 remote-as 200 address-family ipv4 multicast neighbor 192.168.10.1 activate
SR7750调测BGP邻居状态变化的命令是（）A、debug router bgp openB、debug router bgp eventsC、debug router bgp updateD、debug router bgp packets
Two routers configured to run BGP have been connected to a firewall， one on the inside interface and one on the outside interface. BGP has been configured so the two routers should peer， including the correct BGP session endpoint addresses and the correct BGP session hop-count limit （EBGP multihop）. What is a good first test to see if BGP will work across the firewall？（）A、Attempt to TELNET from the router connected to the inside of the firewall to the router connected to the outside of the firewall. If telnet works， BGP will work， since telnet and BGP both use TCP to transport data.B、Ping from the router connected to the inside interface of the firewall to the router connected to the outside interface of the firewall. If you can ping between them， BGP should work， since BGP uses IP to transport packets.C、There is no way to make BGP work across a firewall without special configuration， so there is no simple test that will show you if BGP will work or not， other than trying to start the peering session.D、There is no way to make BGP work across a firewall.
Router 1 is configured for BGP as dual-homed on the Cisco network. Which three BGP attributes are carried in every BGP update on this router （both IBGP and EBGP）？（）A、originB、router-IDC、AS-pathD、local-preferenceE、next-hop
In which two ways does the BGP graceful capability preserve prefix information during a restart？（）A、The peer router immediately removes the BGP routers that it learned from the restarting router from itsBGP routing tables.B、The router establishes BGP sessions with other routers and relearns the BGP routes from others that are also capable of graceful restart. The restarting router waits to receive updates from the neighboringrouters. When the neighboring routers send end-of-RIB messages to indicate that they are donesending updates，the restarting router starts sending its own updates.C、The peer router sends an end-of-RIB message to the restarting router.D、The restarting router removes any stale prefixes after the timer for stale entries expires.E、The restarting router does not remove any stale prefixes after the timer for stale entries expires.
Router R-1 is configured for BGP routing as shown below： router bgp 65300network 27.0.0.0neighbor 192.23.1.1 remote-as 65300 From the perspective of router R-1， what kind of router is the router with IP address 192.23.1.1？（）A、A peer router running IBGPB、A peer router running EBGPC、A community member running IBGPD、A peer group member running IBGPE、A peer group member running EBGP
Which BGP feature shou ld be used to avoid high memory utilization on a router?（）A、soft - reconfigurationB、route refreshC、BGP communitiesD、full - mesh BGP peering
During BGP configuration on a router that has peered with other BGP speakers, the BGP command aggregate-a ddress 172.32.0.0 255.255.252.0 is issued. However, the peers do not receive this aggregate network in BGP advertisements. Also, the router does not have this aggregate network in its BGP table. Which option indicates a possible reason this command did not cause the router to advertise the aggregate network to its peers?（）A、Interface NULL 0 is likely shutdown.B、The next hop IP address must be a loopback address.C、The BGP command no auto - summary is missing.D、The BGP command no synchronization is missing.E、Subnets of 172.32.0.0/22 do not exist in the BGP table.F、The IGP running on this router does not have network 172.32.0.0/22 installed.
单选题In BGP routing，what does the rule of synchronization mean？（）AA BGP router can only advertise an EBGP learned route，provided that the route is an IGP route in the routing table.BA BGP router can only advertise an IBGP learned route，provided that the route is an IGP route in the routing table.CA BGP router can only advertise an IBGP learned route，provided that the route is an IGP route that is not in the routing table.DA BGP router can only advertise an EBGP learned route，provided that the route is a metric of 0 in the BGP table.
单选题Two routers configured to run BGP have been connected to a firewall， one on the inside interface and one on the outside interface. BGP has been configured so the two routers should peer， including the correctBGP session endpoint addresses and the correct BGP session hop-count limit EBGP multihop. What is agood first test to see if BGP will work across the firewall？（）AAttempt to TELNET from the router connected to the inside of the firewall to the router connected to theoutside of the firewall. If telnet works， BGP will work， since telnet and BGP both use TCP to transportdata.BPing from the router connected to the inside interface of the firewall to the router connected to theoutside interface of the firewall. If you can ping between them， BGP should work， since BGP uses IP totransport packets.CThere is no way to make BGP work across a firewall without special configuration， so there is no simpletest that will show you if BGP will work or not， other than trying to start the peering session.DThere is no way to make BGP work across a firewall.
多选题In which two ways does the BGP graceful capability preserve prefix information during a restart？（）AThe peer router immediately removes the BGP routers that it learned from the restarting router from itsBGP routing tables.BThe router establishes BGP sessions with other routers and relearns the BGP routes from others that are also capable of graceful restart. The restarting router waits to receive updates from the neighboringrouters. When the neighboring routers send end-of-RIB messages to indicate that they are donesending updates，the restarting router starts sending its own updates.CThe peer router sends an end-of-RIB message to the restarting router.DThe restarting router removes any stale prefixes after the timer for stale entries expires.EThe restarting router does not remove any stale prefixes after the timer for stale entries expires.
多选题Which of the following commands causes a router to bring down BGP neighbor relationships?（）Aclear ip bgp *Bclear ip bgp 1.1.1.1Cclear ip bgp * softDclear ip bgp 1.1.1.1 out
多选题In which two ways does the BGP graceful restart capability preserve prefix information during a restart？（）AThe peer router sends an end-of RIB message to the restarting routerBThe peer router immediately removes the BGP routes that it learned from the restarting router from its BGP routing tableCThe restarting router does not remove any stale prefixes after the timer for stale entries expiresDThe router establishes BGP sessions with other routers and relearns the BGP routes from other routers that are also capable of graceful restart. The restarting router waits to receive updates from the neighboring routers. When the neighboring routers send end-of-RIB messages to indicate that they are done sending updates， the restarting router starts sending its own updatesEThe restarting router removes any stale prefixes after the timer for stale entries expires
单选题You have a router running BGP for the MPLS network and OSPF for the local LAN network at the sales office. A route is being learned from the MPLS network that also exists on the OSPF local network.It is important that the router chooses the local LAN route being learned from the downstream switch running OSPF rather than the upstream BGP neighbor. Also，if the local OSPF route goes away，the BGP route needs to be used. What should be configured to make sure that the router will choose the LAN network as the preferred path？（）Astatic route needs to be addedBfloating static route needs to be addedCbgp backdoor commandDospf backdoor command
单选题Router R-1 is configured for BGP routing as shown below： router bgp 65300network 27.0.0.0neighbor 192.23.1.1 remote-as 65300 From the perspective of router R-1， what kind of router is the router with IP address 192.23.1.1？（）AA peer router running IBGPBA peer router running EBGPCA community member running IBGPDA peer group member running IBGPEA peer group member running EBGP
多选题Router 1 is configured for BGP as dual-homed on the Cisco network. Which three BGP attributes are carried in every BGP update on this router （both IBGP and EBGP）？（）AoriginBrouter-IDCAS-pathDlocal-preferenceEnext-hop
多选题A router is running BGP and receives more than one route for a particular prefix. Assume all the routes for this prefix have the same attributes. Which three path features would be reasons be for the rou ter to ignore some of the routes and not consider them as candidates for the best path?（）Apaths from an internal BGP (iBGP) neighbor if the local autonomous system (AS) appears in the AS_PATHBpaths for which the NEXT_HOP is inaccess ibleCpaths from an external BGP (eBGP) neighbor if the local autonomous system (AS) appears in the AS_PATHDpaths for which the NEXT_HOP is accessibleEpaths that are marked as synchronized in the show ip bgp outputFpaths that are marked as not synchronized in the show ip bgp output
单选题Two routers configured to run BGP have been connected to a firewall， one on the inside interface and one on the outside interface. BGP has been configured so the two routers should peer， including the correct BGP session endpoint addresses and the correct BGP session hop-count limit （EBGP multihop）. What is a good first test to see if BGP will work across the firewall？（）AAttempt to TELNET from the router connected to the inside of the firewall to the router connected to the outside of the firewall. If telnet works， BGP will work， since telnet and BGP both use TCP to transport data.BPing from the router connected to the inside interface of the firewall to the router connected to the outside interface of the firewall. If you can ping between them， BGP should work， since BGP uses IP to transport packets.CThere is no way to make BGP work across a firewall without special configuration， so there is no simple test that will show you if BGP will work or not， other than trying to start the peering session.DThere is no way to make BGP work across a firewall.