Which two locations can be configured as a source for the IOS image in the boot system command?（）A、RAMB、NVRAMC、flash memoryD、HTTP serverE、TFTP serverF、Telnet server
Which two locations can be configured as a source for the IOS image in the boot system command?（）
- A、RAM
- B、NVRAM
- C、flash memory
- D、HTTP server
- E、TFTP server
- F、Telnet server
相关考题：
During the boot sequence, a Ezonexam 2800 series router needs to locate and load an operating system. What is the default order the router uses to find an operating system?A．ROM, TFTP server, FlashB．Flash, TFTP server, ROMC．Flash, NVRAM, TFTP serverD．Flash, ROM, TFTP serverE．Flash, TFTP server, RAM
Which is the correct fallback sequence for loading the Cisco IOS?() A. ROM, Flash, NVRAMB. ROM, TFTP server, FlashC. Flash, TFTP server, ROMD. Flash, NVRAM, RAM
You need to upgrade the IOS of an existing router on your network. The new IOS image is located on a TFTP server that you have set up within the network. What command should you issue in order to download the new IOS version?（）A. Router# copy tftp flashB. Router# copy flash runC. Router(config)# restore flashD. Router(config)# repair flashE. Router#copy flash tftpF. Router# copy start flash
When upgrading the IOS image, the network administrator receives the exhibited error message. What could be the cause of this error?() A. The new IOS image is too large for the router flash memory.B. The TFTP server is unreachable from the router.C. The new IOS image is not correct for this router platform.D. The IOS image on the TFTP server is corrupt.E. There is not enough disk space on the TFTP server for the IOS image.
There are no boot system commands in a router configuration in NVRAM.What is the fallback sequence that router will use to find an ios during reload?() A. Flash,TFTP server,ROMB. Flash,NVRAM,ROMC. ROM,NVRAM,TFTP serverD. NVRAM,TFTP server,ROME. TFTP server,Flash,NVRAM
Refer to the exhibit. For what two reasons has the router loaded its IOS image from the location that is shown? () A.Router1 has specific boot system command that instruct it to load IOS from TFTP server.B.Router1 is acting as a TFTP server for other routers.C.Router1 cannot locate a valid IOS image in flash memory.D.Router1 defaulted to ROMMON mode and loaded the IOS image from a TFTP server.E.Cisco routers will first attempt to load a image from TFTP for management purposes.
A cisco router is booting and has just completed the POST process.It is now ready to find and load an IOS image.what function does the router perform next?() A.It checks the configuration registerB.It attempts to boot from a TFTP serverC.It loads the first image file in flash memoryD.It inspects the configuration file in NVRAM for boot instructions
There are no boot system commands in arouter configuration in NVRAM.What is the fallback sequence that router will use to find an ios during reload?() A.Flash,TFTPserver,ROMB.Flash,NVRAM,ROMC.ROM,NVRAM,TFTP serverD.NVRAM,TFTP server,ROME.TFTP server,Flash,NVRAM
Which two locations can be configured as a source for the IOS image in the boot system command?() A.RAMB.NVRAMC.flash memoryD.HTTP serverE.TFTP serverF.Telnet server
Which result is of securing the Cisco IOS image by use of the Cisco IOS image resilience feature？（）A、The Cisco IOS image file will not be visible in the output from the show flash command.B、The show version command will not show the Cisco IOS image file location.C、When the router boots up， the Cisco IOS image will be loaded from a secured FTP location.D、The running Cisco IOS image will be encrypted and then automatically backed up to a TFTP server.
You need to upgrade the IOS of an existing router on your network. The new IOS image is located on a TFTP server that you have set up within the network. What command should you issue in order to download the new IOS version?（）A、Router# copy tftp flashB、Router# copy flash runC、Router(config)# restore flashD、Router(config)# repair flashE、Router#copy flash tftpF、Router# copy start flash
When upgrading the IOS image, the network administrator receives the exhibited error message. What could be the cause of this error?（）A、The new IOS image is too large for the router flash memory.B、The TFTP server is unreachable from the router.C、The new IOS image is not correct for this router platform.D、The IOS image on the TFTP server is corrupt.E、There is not enough disk space on the TFTP server for the IOS image.
A Cisco router is booting and has just completed the POST process. It is now ready to find and load an IOS image. What function does the router perform next?（）A、It checks the configuration register.B、It attempts to boot from a TFTP server.C、It loads the first image file in flash memory.D、It inspects the configuration file in NVRAM for boot instructions.
There are no boot system commands in arouter configuration in NVRAM.What is the fallback sequence that router will use to find an ios during reload?（）A、Flash,TFTPserver,ROMB、Flash,NVRAM,ROMC、ROM,NVRAM,TFTP serverD、NVRAM,TFTP server,ROME、TFTP server,Flash,NVRAM
Which is the correct fallback sequence for loading the Cisco IOS?（）A、ROM, Flash, NVRAMB、ROM, TFTP server, FlashC、Flash, TFTP server, ROMD、Flash, NVRAM, RAM
There are no boot system commands in a router configuration in NVRAM.What is the fallback sequencethat router will use to find an ios during reload？（）A、Flash，TFTP server，ROMB、Flash，NVRAM，ROMC、ROM，NVRAM，TFTP serverD、NVRAM，TFTP server，ROME、TFTP server，Flash，NVRAM
User defined locale files can be stored in which two locations?（）A、DRAMB、SDRAMC、CME flash，slot0D、CUE flash，slot0E、TFTP directory specified by cnf-file location command
A cisco router is booting and has just completed the POST process.It is now ready to find and load an IOS image.what function does the router perform next？（）A、It checks the configuration registerB、It attempts to boot from a TFTP serverC、It loads the first image file in flash memoryD、It inspects the configuration file in NVRAM for boot instructions
What is the purpose of the secure boot-config global configuration ？（）A、takes a snapshot of the router running configuration and securely archives it in persistent storageB、stores a secured copy of the Cisco IOS image in its persistent storageC、backs up the Cisco IOS image from flash to a TFTP serverD、enables Cisco IOS image resilience
Which two locations can be configured as a source for the IOS image in the boot system command?（）A、RAMB、NVRAMC、flash memoryD、HTTP serverE、TFTP serverF、Telnet server
Refer to the exhibit. For what two reasons has the router loaded its IOS image from the location that is shown? （）A、Router1 has specific boot system command that instruct it to load IOS from TFTP server.B、Router1 is acting as a TFTP server for other routers.C、Router1 cannot locate a valid IOS image in flash memory.D、Router1 defaulted to ROMMON mode and loaded the IOS image from a TFTP server.E、Cisco routers will first attempt to load a image from TFTP for management purposes.
When configuring a DHCP server， which of the following can the administrator define for DHCPusers？（）A、 Database serverB、 NTP serverC、 DHCP serverD、 SQL serverE、 DNS serverF、 Domain name
多选题Which two locations can be configured as a source for the IOS image in the boot system command?（）ARAMBNVRAMCflash memoryDHTTP serverETFTP serverFTelnet server
单选题There are no boot system commands in a router configuration in NVRAM. What is the fallback sequence that the router will use to find an IOS during reload?（）ATFTP server, Flash, NVRAMBROM, NVRAM, TFTP serverCNVRAM, TFTP server, ROMDFlash, TFTP server, ROMEFlash, NVRAM, ROM
单选题There are no boot system commands in arouter configuration in NVRAM.What is the fallback sequence that router will use to find an ios during reload?（）AFlash,TFTPserver,ROMBFlash,NVRAM,ROMCROM,NVRAM,TFTP serverDNVRAM,TFTP server,ROMETFTP server,Flash,NVRAM
单选题You need to upgrade the IOS of an existing router on your network. The new IOS image is located on a TFTP server that you have set up within the network. What command should you issue in order to download the new IOS version?（）ARouter# copy tftp flashBRouter# copy flash runCRouter(config)# restore flashDRouter(config)# repair flashERouter#copy flash tftpFRouter# copy start flash