Workstation A has been assigned an IP address of 192.0.2.24/28.Workstation B has been assigned an IP address of 192.0.2.100/28.The two workstations are connected with a straight-through cable.Attempts to ping between the hosts are unsuccessful. What two things can be done to allow communications between the hosts? ()A、Replace the straight-through cable with a crossover cableB、Change the subnet mask of the hosts to /25C、Change the subnet mask of the hosts to /26D、Change the address of Workstation A to 192.0.2.15E、Change the address of Workstation B to 192.0.2.111

Workstation A has been assigned an IP address of 192.0.2.24/28.Workstation B has been assigned an IP address of 192.0.2.100/28.The two workstations are connected with a straight-through cable.Attempts to ping between the hosts are unsuccessful. What two things can be done to allow communications between the hosts? ()

  • A、Replace the straight-through cable with a crossover cable
  • B、Change the subnet mask of the hosts to /25
  • C、Change the subnet mask of the hosts to /26
  • D、Change the address of Workstation A to 192.0.2.15
  • E、Change the address of Workstation B to 192.0.2.111

相关考题:

You want to configure a multiboot system with Windows NT Workstation and Windows 2000 Professional.What should you do?A.When installing Windows 2000 Professional run chkdisk in Windows NT Workstation.B.Disable the disk compression in Windows NT Workstation.C.Install service pack four or later in Windows NT Workstation.D.Install the distributed file system client on the Windows NT Workstation.

The network administrator has asked you to check the status of the workstation’s IP stack by pinging the loopback address.Which address would you ping to perform this task?() A.10.1.1.1B.127.0.0.1C.192.168.0.1D.239.1.1.1

Refer to the exhibit. The user at Workstation B reports that Server A cannot be reacheD.What ispreventing Workstation B from reaching Server A?() A.The IP address for Server A is a broadcast address.B.The IP address for Workstation B is a subnet address.C.The gateway for Workstation B is not on the same subnet.D.The gateway for Server A is not on the same subnet.

You work as a network Technician. A new workstation has consistently been unable to obtain anIP address from the DHCP server when the workstation boots. Older workstations function normally, and the new workstation obtains an address when manually forced to renew its address.  What should be configured on the switch to allow the workstation to obtain an IP address at boot?()A、UplinkFast on the switch port connected to the serverB、BackboneFast on the switch port connected to the serverC、PortFast on the switch port connected to the workstationD、trunking on the switch

The network administrator has asked you to check the status of the workstation’s IP stack by pinging the loopback address.Which address would you ping to perform this task?()A、10.1.1.1B、127.0.0.1C、192.168.0.1D、239.1.1.1

You want to configure a multiboot system with Windows NT Workstation and Windows 2000 Professional. What should you do?()A、 When installing Windows 2000 Professional run chkdisk in Windows NT Workstation.B、 Disable the disk compression in Windows NT Workstation.C、 Install service pack four or later in Windows NT Workstation.D、 Install the distributed file system client on the Windows NT Workstation.

Workstation A has been assigned an IP address of 192.0.2.24/28. Workstation B has been assigned an IP address of 192.0.2.100/28. The two workstations are connected with a straight-through cable. Attempts to ping between the hosts are unsuccessful. What two things can be done to allow communications between the hosts? ()A、Replace the straight-through cable with a crossover cable.B、Change the subnet mask of the hosts to /25.C、Change the subnet mask of the hosts to /26.D、Change the address of Workstation A to 192.0.2.15.E、Change the address of Workstation B to 192.0.2.111.

A technician just installed an antivirus suite on a workstation. It is kept up-to-date and has recently scanned the system. A day later the user reports slower response times than usual. Which of the following is the user MOST likely experiencing?()A、AdvertisementsB、Resource consumptionC、A trojan infectionD、Unremoved viruses

A workstation no longer has network connectivity. Upon visual inspection, all connectors andsettings seem to be properly configured. Which of the following tools should the technician use to troubleshoot this issue? ()A、PSU testerB、Loopback plugC、Cable testerD、Multimeter

A technician is troubleshooting a workstation that has the wrong time information. All workstations should be pointing to a central NTP server. Which of the following locations would the technician check to investigate error messages related to this issue?()A、IIS logB、Application logC、System logD、Security log

The server administrator has just brought a new Windows server online. Permissions are set, but the server administrator cannot connect remotely. Which of the following is MOST likely the problem?()A、WMI was not enabled.B、Server service was not enabled.C、RDP was not enabled.D、Workstation service was not enabled.

A workstation has an error message that states “NTLDR is missing”. Which of the following is MOST likely the cause?()A、The system did not shutdown gracefullyB、The CMOS battery is deadC、The BIOS firmware is corruptD、A virus has corrupted the file

A technician notices that when trying to ping a workstation by network name the workstation does not reply back over the network. The workstation is part of the domain and is able to get to the Internet. Which of the following is the cause of the problem?()A、Faulty cable on the workstationB、Wrong host name on the workstationC、Wrong WINS on the workstationD、Incorrect IP address assigned to the workstation

A technician is replacing a processor in a workstation. After installation, the workstation starts up and immediately shuts down; the technician tries to start the workstation several more times and gets the same result. Which of the following is the cause of this issue?()A、The workstation is not plugged in.B、The thermal paste was not applied.C、The memory was not installed properly.D、The L2 cache was not cleared.

A user’s workstation currently has four connected IDE devices. Which of the following could be added to the workstation to allow more ATA devices to be added to the workstation?()A、Network Interface cardB、Port expansion cardC、Serial interface cardD、Modem card

In the customer’s environment, a group of five employees work within a room that has three PCs. The PCs have excellent hardware configurations, with considerable RAM and a fast CPU. The employees use these PCs only when they need to access an application, which is for a short duration of time. For the rest of the time, they work with their tools on their desks. Which IBM Tivoli Access Manager for Enterprise Single Sign-On session management configuration should be used for these three PCs for optimum performance?()A、Citrix workstationB、personal workstationC、shared workstation, private desktopD、shared workstation, shared desktop

Mike has been using RIS (Remote Installation Services), to install all new workstations on his network. A new Service Pack has recently been released from Microsoft and he wants to update his new image. He brings up his test workstation that has Windows 2000 Professional on it and installs the new Service Pack.  What is the next step Mike must take?()A、Slipstream this Service Pack to the CD image on the RIS Server.B、Use xcopy to copy all files to the RIS server.C、Run Riprep.exeD、Run Sysprep.exe

You are configuring 5 computers to use both Windows NT workstation 4.0 and Windows 2000 Professional. Each computer has an 8GB hard disk. You configure that hard disk on each computer to have two 4GB partitions. Windows NT workstation is installed on drive C. Windows 2000 Professional is installed on drive D.  In Windows 2000 Professional you configure a disk quota on drive D to prevent users from saving work files on the disk. You restart the computer and load Windows NT workstation. You notice that users can still save files to drive D. You want to prevent users from saving files to drive D in either operating system. You also want to ensure that users can access both drives using either operating system.  What should you do on each computer? ()A、Use Windows 2000 Professional to configure drive D as a dynamic volumeB、Use Windows 2000 Professional to enable Encrypting File System (EFS) on drive DC、Use Windows NT workstation to configure NTFS permission on drive D to deny the users write  permissionD、Reinstall Windows NT workstation after configuring the disk code task

You want to configure your Windows NT Workstation 4.0 computer Company1 to run both Windows NT Workstation and Windows 2000 Professional.  What should you do before installing Windows 2000 Professional on Company1? ()A、 Run Check Disk in Windows NT Workstation 4.0.B、 Disable disk compression in Windows NT Workstation 4.0.C、 Install Service Pack 4 or later for Windows NT Workstation 4.0.D、 Install the Distributed file system (Dfs) client in Windows NT Workstation 4.0.

单选题A technician is replacing a processor in a workstation. After installation, the workstation starts up and immediately shuts down; the technician tries to start the workstation several more times and gets the same result. Which of the following is the cause of this issue?()AThe workstation is not plugged in.BThe thermal paste was not applied.CThe memory was not installed properly.DThe L2 cache was not cleared.

多选题Which two are valid agent interfaces for Cisco Unified Contact Center Express?()AMacintosh workstation with Cisco IP Phone AgentBLinux workstation running CAD with IP CommunicatorCLinux workstation running CAD with Cisco Unified IP Phone 7960GDCitrix Terminal running CAD with IP CommunicatorECitrix Terminal with Cisco IP Phone AgentFWindows workstation running CAD with Media Termination option

单选题You are configuring five computers for Windows NT Workstation 4.0 and Windows 2000 Professional. Each computer has an 8 GB hard disk. You configure the hard disk on each computer to have two 4 GB partitions.  Windows NT Workstation is installed on drive C and Windows 2000 Professional on drive D. In Windows 2000 Professional, you configure a disk quota on drive D to prevent users from saving work files on the disk. You restart your computer and load Windows NT Workstation. You notice that users can save files to drive D.  You want to prevent users from saving the files to drive D in either operating system. You also want to ensure that users can access both drives while using either operating system.  What should you do?()AUse Windows 2000 Professional to configure drive D as a dynamic partitionBUse Windows 2000 Professional to enable encrypting file system on drive DCUse Windows NT workstation to configure NTFS permissions on drive D to deny the users  write permissionDReinstall Windows NT Workstation after configuring disk quotas

单选题A technician has installed a new motherboard in a workstation, but after hardware tests, themotherboard has failed. Which of the following should the technician do FIRST before replacingthe motherboard? ()AReseat all power connections.BRemove the CMOS battery.CInstall the graphics card.DGround to the case.

多选题Workstation A has been assigned an IP address of 192.0.2.24/28.Workstation B has been assigned an IP address of 192.0.2.100/28.The two workstations are connected with a straight-through cable.Attempts to ping between the hosts are unsuccessful. What two things can be done to allow communications between the hosts? ()AReplace the straight-through cable with a crossover cableBChange the subnet mask of the hosts to /25CChange the subnet mask of the hosts to /26DChange the address of Workstation A to 192.0.2.15EChange the address of Workstation B to 192.0.2.111

单选题The network administrator has asked you to check the status of the workstation’s IP stack by pinging the loopback address.Which address would you ping to perform this task?()A10.1.1.1B127.0.0.1C192.168.0.1D239.1.1.1

单选题A workstation has an error message that states “NTLDR is missing”. Which of the following is MOST likely the cause?()AThe system did not shutdown gracefullyBThe CMOS battery is deadCThe BIOS firmware is corruptDA virus has corrupted the file

单选题You want to configure your Windows NT Workstation 4.0 computer Company1 to run both Windows NT Workstation and Windows 2000 Professional.  What should you do before installing Windows 2000 Professional on Company1? ()A Run Check Disk in Windows NT Workstation 4.0.B Disable disk compression in Windows NT Workstation 4.0.C Install Service Pack 4 or later for Windows NT Workstation 4.0.D Install the Distributed file system (Dfs) client in Windows NT Workstation 4.0.

单选题A customer wants to know what version of DirectX the current workstation has installed. Which of the following command line tools would the customer use?()AeditBsysteminfoCgpedit.mscDdxdiag