What is the purpose of an address book？（）A、It holds security policies for particular hosts.B、It holds statistics about traffic to and from particular hosts.C、It defines hosts in a zone so they can be referenced by policies.D、It maps hostnames to IP addresses to serve as a backup to DNS resolution.
What is the purpose of an address book？（）
- A、It holds security policies for particular hosts.
- B、It holds statistics about traffic to and from particular hosts.
- C、It defines hosts in a zone so they can be referenced by policies.
- D、It maps hostnames to IP addresses to serve as a backup to DNS resolution.
相关考题：
The network administrator has configured port security on a Ezonexam switch. Why would a network administrator configure port security on this Ezonexam device?A．To prevent unauthorized hosts from getting access to the LANB．To limit the number of Layer 2 broadcasts on a particular switch portC．To prevent unauthorized Telnet or SSH access to a switch portD．To prevent the IP and MAC address of the switch and associated portsE．None of the above
The Ezonexam network administrator wants to ensure that only a single web server can connect to pot Fa0/1 on a catalyst switch. The server is plugged into the switch's Fast Eth. 0/1 port and the network administrator is about to bring the server online. What can the administrator do to ensure that only the MAC address of this server is allowed by switch port Fa0/1? (Choose two)A．Configure port Fa0/1 to accept connections only from the static IP address of the serverB．Configure the MAC address of the server as a static entry associated with port Fa0/1C．Employ a proprietary connector type on Fa0/1 that is incomputable with other host connectorsD．Configure port security on Fa0/1 to reject traffic with a source MAC address other than that of the serverE．Bind the IP address of the server to its MAC address on the switch to prevent other hosts from spoofing the server IP address
Which two statements are true regarding the system－default security policy [edit security policies default－policy]?()(Choose two.) A. Traffic is permitted from the trust zone to the untrust zone.B. Intrazone traffic in the trust zone is permitted.C. All traffic through the device is denied.D. The policy is matched only when no other matching policies are found.
You want to create a policy allowing traffic from any host in the Trust zone to hostb.example.com(172.19.1.1) in theUntrust zone. How do you do create this policy? () A. Specify the IP address (172.19.1.1/32) as the destination address in the policy.B. Specify the DNS entry (hostb.example.com.) as the destination address in the policy.C. Create an address book entry in the Trust zone for the 172.19.1.1/32 prefix and reference this entry in the policy.D. Create an address book entry in the Untrust zone for the 172.19.1.1/32 prefix and reference this entry in the policy.
Why would a network administrator configure port security on a switch?() A. To prevent unauthorized Telnet access to a switch port.B. To limit the number of Layer 2 broadcasts on a particular switch port.C. To prevent unauthorized hosts from accessing the LAN.D. To protect the IP and MAC address of the switch and associated ports.E. To block unauthorized access to the switch management interfaces over common TCP ports.
A network administrator wants to ensure that only the server can connect to port Fa0/1 on a Catalyst switch. The server is plugged into the switch Fa0/1 port and the network administrator is about to bring the server online. What can the administrator do to ensure that only the MAC address of the server is allowed by switch port Fa0/1?（）A. Configure port Fa0/1 to accept connections only from the static IP address of the server.B. Employ a proprietary connector type on Fa0/1 that is incompatible with other host connectors.C. Configure the MAC address of the server as a static entry associated with port Fa0/1.D. Bind the IP address of the server to its MAC address on the switch to prevent other hosts from spoofing the server IP address.E. Configure port security on Fa0/1 to reject traffic with a source MAC address other than that of the server.F. Configure an access list on the switch to deny server traffic from entering any port other than Fa0/1.
Why would a network administrator configure port security on a switch()。 A.to prevent unauthorized Telnet access to a switch portB.to limit the number of Layer 2 broadcasts on a particular switch portC.to prevent unauthorized hosts from accessing the LAND.to protect the IP and MAC address of the switch and associated portsE.to block unauthorized access to the switch management interfaces over common TCP ports
Why would a network administrator configure port security on a switch?（）A、to prevent unauthorized Telnet access to a switch portB、to limit the number of Layer 2 broadcasts on a particular switch portC、to prevent unauthorized hosts from accessing the LAND、to protect the IP and MAC address of the switch and associated portsE、to block unauthorized access to the switch management interfaces over common TCP ports
Assume the default-policy has not been configured.Given the configuration shown in the exhibit， which two statements about traffic from host_a inthe HR zone to host_b in the trust zone are true？（） [edit security policies from-zone HR to-zone trust] user@host# show policy one { match { source-address any； destination-address any； application [ junos-http junos-ftp ]； } then { permit； } } policy two { match { source-address host_a； destination-address host_b； application [ junos-http junos-smtp ]； } then { deny； } }A、DNS traffic is denied.B、HTTP traffic is denied.C、FTP traffic is permitted.D、SMTP traffic is permitted.
A network administrator wants to permit Telnet traffic initiated from the address book entry the10net in a zone called UNTRUST to the address book entry Server in a zone called TRUST. However, the administrator does not want the server to be able to initiate any type of traffic from the TRUST zone to the UNTRUST zone. Which configuration statement would correctly accomplish this task?（）A、from-zone UNTRUST to-zone TRUST { policy DenyServer { match { source-address any; destination-address any; application any; } then { deny; } } } from-zone TRUST to-zone UNTRUST { policy AllowTelnetin { match { source-address the10net; destination-address Server; application junos-telnet; } then { permit; } } }B、from-zone TRUST to-zone UNTRUST { policy DenyServer { match { source-address Server; destination-address any; application any; } then {deny; } } } from-zone UNTRUST to-zone TRUST { policy AllowTelnetin { match { source-address the10net; destination-address Server; application junos-telnet; } then { permit; } } }C、from-zone UNTRUST to-zone TRUST { policy AllowTelnetin { match { source-address the10net; destination-address Server; application junos-ftp; } then { permit; } } }D、from-zone TRUST to-zone UNTRUST { policy DenyServer { match { source-address Server; destination-address any; application any; } then { permit; } } } from-zone UNTRUST to-zone TRUST { policy AllowTelnetin { match {source-address the10net; destination-address Server; application junos-telnet; } then { permit; } } }
What is the result of issuing the frame-relay map ip 192.168.1.2 202 broadcast command?（）A、defines the source IP address that is used in all broadcast packets on DLCI 202B、defines the DLCI that is used for all packets that are sent to the 192.168.1.2 IP addressC、defines the destination IP address that is used in all broadcast packets on DLCI 202D、defines the DLCI on which packets from the 192.168.1.2 IP address are received
What is the purpose of assigning an IP address to a switch?（）A、Provides local hosts with a default gateway addressB、Allows remote management of the switch.C、Allows the switch to respond to ARP requests between two hostsD、Ensures that hosts on the same LAN can communicate with each other.
What is the IPv6 address FF02::2 used for?（）A、all routers in a local segmentB、all routers in an autonomous systemC、all hosts in a local segmentD、all hosts in a particular multicast group
In a DNS environment， the zone file that maps hostnames to IP address （sometimes called the named.hosts file）， is created on which of the following servers？（）A、CacheB、PrimaryC、SecondaryD、Primary and secondary
You want to allow your device to establish OSPF adjacencies with a neighboring device connected tointerface ge-0/0/3.0. Interface ge-0/0/3.0 is a member of the HR zone.Under which configuration hierarchy must you permit OSPF traffic？（）A、[edit security policies from-zone HR to-zone HR]B、[edit security zones functional-zone management protocols]C、[edit security zones protocol-zone HR host-inbound-traffic]D、[edit security zones security-zone HR host-inbound-traffic protocols]
Which configuration shows the correct application of a security policy scheduler?（）A、[edit security policies from-zone Private to-zone External] user@host# show policy allowTransit { match { source-address PrivateHosts; destination-address ExtServers; application ExtApps; } then { permit { tunnel { ipsec-vpn myTunnel; } scheduler-name now; } } }B、[edit security policies from-zone Private to-zone External] user@host# show policy allowTransit { match { source-address PrivateHosts; destination-address ExtServers; application ExtApps; } then { permit { tunnel { ipsec-vpn myTunnel; } } } scheduler-name now; }C、[edit security policies from-zone Private to-zone External] user@host# show policy allowTransit { match { source-address PrivateHosts; destination-address ExtServers; application ExtApps; } then { permit { tunnel { ipsec-vpn scheduler-name now; } } } }D、[edit security policies from-zone Private to-zone External] user@host# show policy allowTransit { match { source-address PrivateHosts; destination-address ExtServers; application ExtApps; scheduler-name now; } then { permit { tunnel { ipsec-vpn myTunnel; } } } scheduler-name now; }myTunnel;
Your task is to provision the Junos security platform to permit transit packets from the Private zone to the External zone by using an IPsec VPN and log information at the time of session close.Which configuration meets this requirement?（）A、[edit security policies from-zone Private to-zone External] user@host# show policy allowTransit { match { source-address PrivateHosts;destination-address ExtServers; application ExtApps; } then { permit { tunnel { ipsec-vpn VPN; } } log { session-init; } } }B、[edit security policies from-zone Private to-zone External] user@host# show policy allowTransit { match { source-address PrivateHosts; destination-address ExtServers; application ExtApps; } then { permit { tunnel { ipsec-vpn VPN; } } count { session-close; } } }C、[edit security policies from-zone Private to-zone External] user@host# showpolicy allowTransit { match { source-address PrivateHosts; destination-address ExtServers; application ExtApps; } then { permit { tunnel { ipsec-vpn VPN;} } log { session-close; } } }D、[edit security policies from-zone Private to-zone External] user@host# show policy allowTransit { match { source-address PrivateHosts; destination-address ExtServers; application ExtApps; } then { permit { tunnel { ipsec-vpn VPN; log; count session-close; } } } }
What is the purpose of a zone in JUNOS Software？（）A、A zone defines a group of security devices with a common management.B、A zone defines the geographic region in which the security device is deployed.C、A zone defines a group of network segments with similar security requirements.D、A zone defines a group of network segments with similar class-of-service requirements.
You want to create a security policy allowing traffic from any host in the Trust zone to hostb.example.com（172.19.1.1） in the Untrust zone. How do you create this policy？（）A、Specify the IP address （172.19.1.1/32） as the destination address in the policy.B、Specify the DNS entry （hostb.example.com.） as the destination address in the policy.C、Create an address book entry in the Trust zone for the 172.19.1.1/32 prefix and reference this entry in the policy.D、Create an address book entry in the Untrust zone for the 172.19.1.1/32 prefix and reference this entry in the policy
Which two statements are true regarding the system-default security policy [edit security policies default-policy]?（）(Choose two.)A、Traffic is permitted from the trust zone to the untrust zone.B、Intrazone traffic in the trust zone is permitted.C、All traffic through the device is denied.D、The policy is matched only when no other matching policies are found.
Given the configuration shown in the exhibit， which statement is true about traffic from host_ato host_b？（） [edit security policies from-zone HR to-zone trust] user@host# showpolicy two { match { source-address subnet_a； destination-address host_b； application [ junos-telnet junos-ping ]； } then { reject； } } policy one { match { source-address host_a； destination-address subnet_b； application any； } then { permit； } } host_a is in subnet_a and host_b is in subnet_b.A、DNS traffic is denied.B、Telnet traffic is denied.C、SMTP traffic is denied.D、Ping traffic is permitted
单选题Why would a network administrator configure port security on a switch?（）Ato prevent unauthorized Telnet access to a switch portBto limit the number of Layer 2 broadcasts on a particular switch portCto prevent unauthorized hosts from accessing the LANDto protect the IP and MAC address of the switch and associated portsEto block unauthorized access to the switch management interfaces over common TCP ports
单选题A network administrator wants to permit Telnet traffic initiated from the address book entry the10net in azone called UNTRUST to the address book entry Server in a zone called TRUST.However， the administrator does not want the server to be able to initiate any type of traffic from the TRUSTzone to the UNTRUST zone. Which configuration would correctly accomplish this task？（）A AB BC CD D
单选题What is the purpose of an address book？（）AIt holds security policies for particular hosts.BIt holds statistics about traffic to and from particular hosts.CIt defines hosts in a zone so they can be referenced by policies.DIt maps hostnames to IP addresses to serve as a backup to DNS resolution.
多选题A network administrator wants to ensure that only the server can connect to port Fa0/1 on a Catalyst switch. The server is plugged into the switch Fa0/1 port and the network administrator is about to bring the server online. What can the administrator do to ensure that only the MAC address of the server is allowed by switch port Fa0/1?（）AConfigure port Fa0/1 to accept connections only from the static IP address of the server.BEmploy a proprietary connector type on Fa0/1 that is incompatible with other host connectors.CConfigure the MAC address of the server as a static entry associated with port Fa0/1.DBind the IP address of the server to its MAC address on the switch to prevent other hosts from spoofing the server IP address.EConfigure port security on Fa0/1 to reject traffic with a source MAC address other than that of the server.FConfigure an access list on the switch to deny server traffic from entering any port other than Fa0/1.
多选题Which two statements are true regarding the system-default security policy [edit security policies default-policy]?（）(Choose two.)ATraffic is permitted from the trust zone to the untrust zone.BIntrazone traffic in the trust zone is permitted.CAll traffic through the device is denied.DThe policy is matched only when no other matching policies are found.
单选题What is the purpose of a zone in JUNOS Software？（）AA zone defines a group of security devices with a common management.BA zone defines the geographic region in which the security device is deployed.CA zone defines a group of network segments with similar security requirements.DA zone defines a group of network segments with similar class-of-service requirements.