单选题A system administrator has created tty2 on a serial port connection to a system. When attempting to verify the connection the following error is observed： # cu -ml tty2 cu： 0835-028 The connection failed. NO DEVICES AVAILABLE. Which of the following should be performed to correct this error？（）ACreate an entry for tty2 in the /etc/uucp/Devices fileBRe-enter the command as cu -dml tty2CCreate an entry for tty2 in the /etc/uucp/Systems fileDRe-enter the command as cu -s 9600 -dh -t -l tty2
单选题
A system administrator has created tty2 on a serial port connection to a system. When attempting to verify the connection the following error is observed： # cu -ml tty2 cu： 0835-028 The connection failed. NO DEVICES AVAILABLE. Which of the following should be performed to correct this error？（）
A
Create an entry for tty2 in the /etc/uucp/Devices file
B
Re-enter the command as cu -dml tty2
C
Create an entry for tty2 in the /etc/uucp/Systems file
D
Re-enter the command as cu -s 9600 -dh -t -l tty2
参考解析
解析：
暂无解析
相关考题：
Given that the current directory is empty, and that the user has read and write privileges to the current, and the following:Which statement is true?() A.Compilation fails.B.Nothing is added to the file system.C.Only a new file is created on the file system.D.Only a new directory is created on the file system.E.Both a new file and a new directory are created on the file system.
HP 352光纤交换机的2个特性:() A.Serial port on rearB.Three system status LEDsC.4Gb/s capableD.Has odd port numbering on the top row and even port numbering on the bottom row
A system administrator has just applied an update to an AIX system to correct a problem, The APAR number is IX49035 and was shipped as part of the PTF number U437542. After applying the APAR fix, the administrator wants to ensure that the fix is applied before informing the system users of the corrected problem. Which of the following commands should the system administrator run to verify that the APAR fix has been applied to the system?（）A.lslpp -f IX49035B.lslpp -fB U437542C.instfix -f IX49035D.instfix -ik IX49035
Refer to the exhibit. The two exhibit devices are the only Cisco devices on the network. The serial network between the two devices has a mask of 255.255.255.252. Given the output that is shown, what three statements are true of these devices? （）A.The Manchester serial address is 10.1.1.1B.The Manchester serial address is 10.1.1.2C.这个Manchester路由器串口地址为：10.1.12D.The London router is a Cisco 2610.E.The Manchester router is a Cisco 2610.F.The CDP information was received on port Serial0/0 of the Manchester router.G.The CDP information was sent by port Serial0/0 of the London Router.
While troubleshooting a connectivity problem, a network administrator notices that a port status LED on a Cisco Catalyst series switch is alternating green and amber. Which condition could this indicate（）。A、The port is experiencing errorsB、The port is administratively disabledC、The port is blocked by spanning treeD、The port has an active link with normal traffic activity
What interface is created when an FC Port Channel is created on a Cisco Unified Computing System？（）A、 An interface ’san-port-channel’ in NXOSB、 An interface ’port-channel’ in NXOSC、 An interface ’port-channel’ with ’mode fc’ configuredD、 An interface ’fc-port-channel’ in NXOS
Company.com wishes to use HACMP on two IBM eServer pSeries servers. During the planning session， it was decided to use the native serial ports s1 or s2 for a non-IP heartbeat network. What should be done to ensure the serial network will function with HACMP heartbeats？（） A、 Use either s1 or s2 port configured as a TTY interface with a NULL Modem cable.B、 Use the s2 serial port on each system configured as a TTY interface with a NULL modem cable.C、 Use the s1 port on each system configured as a TTY interface with a standard serial modemcable.D、 Verify with IBM support which native serial ports for the server model can be used for HACM pheartbeats.
An administrator has added a new device to a system and wants to determine if it has been correctly added to the ODM database. Which command would the system administrator use？（）A、odmgetB、odmaddC、odmshowD、odmcreate
Company.com with a newly installed cluster has been checking the logfiles to determine if the cluster has had any recent activity. The non-IP RS232 heartbeat connection seems to be having a difficulty. The serial network goes down，and then a couple of minutes later comes back up again. This pattern is repeated many times in the log. If this system was installed without regard to best practices， what is the most likely problem with the serial network？（） A、 The serial port is malfunctioning and needs to be repaired.B、 The baud rate is incorrectly specified in the AIX devices configuration.C、 The serial port is not a port approved to support HACMP heartbeat traffic.D、 The baud rate is incorrectly specified in the HACMP interface configuration.
An administrator has just imported a shred Volume Group that had been created on another system in the cluster. In order for the shred volume to be used in the cluster， what is the most important step for the administrator to take first？（） A、 Change the quorum required to false.B、 Change the Volume Group auto vary on to yes， and then vary off the Volume Group.C、 Change the auto vary on value of the Volume Group to no， and then vary off the volume group.D、 Set the Volume Group major number to the same value that the Volume Group had on the system on which it was created.
A new application has been added to a system which needs to automatically be started at system startup. The system administrator has decided to accomplish this by using the /etc/inittab file. Which command would be used to accomplish this in a supported manner？（）A、viB、mkitabC、telinitD、startsrc
A system administrator has added a new graphics card to the system and rebooted. The system pauses with C31 in the three-digit displays. Which of the following causes could be the reason for the hang?（）A、All filesets for CDE have not been loaded. Boot into maintenance mode and load them through SMIT.B、There is a missing device driver, incorrect console configuration, or a serial device plugged into native S1 port.C、The new graphics adapter card is marked defined, not available. Rum smit cfgmgr (Install/Configure Devices Added After IPL with the INPUT device /directory for software set to none). This will reconfigure all devices by walking the bus.D、The LED C31 means that there is a corrupted /dev/hd5. Boot into maintenance mode, fsck /dev/hd5 and then issue the bosboot command.
A system administrator has added a new port entry in /etc/services for a new application to be tested. Which of the following commands should be used to activate this port？（）A、telinit -qB、refresh -s inetdC、startsrc -g servicesD、refresh -s portmap
A system administrator is monitoring a system that has recently shown a decrease in performance. The administrator suspects there is an overload of traffic on a single Ethernet adapter. Which of the following commands is best to identify a possible overload of the Ethernet adapter？（）A、pingB、iostatC、netstatD、ifconfig
A system administrator has been asked to document the hardware configuration of a system. Which command can be used to assist in this task？（）A、lscfgB、mkdevC、lslppD、cfgmgr
A system was rebooted and is taking a long time toreturn. The administrator has logged into the HMC and sees reference code 0c9. What does this mean?（）A、The system is configuring a device.B、A system initiated dump has started.C、The system is varyingon a volume group.D、The system is running an inbuilt self test.
A system administrator is monitoring a system that has recently shown a decrease in performance.The administrator suspects that the system may be low on memory and may be paging excessively.Which of the following commands is best to identify a possible paging problem？（）A、iostatB、netstatC、psD、vmstat
A system administrator has created tty2 on a serial port connection to a system. When attempting to verify the connection the following error is observed： # cu -ml tty2 cu： 0835-028 The connection failed. NO DEVICES AVAILABLE. Which of the following should be performed to correct this error？（）A、Create an entry for tty2 in the /etc/uucp/Devices fileB、Re-enter the command as "cu -dml tty2"C、Create an entry for tty2 in the /etc/uucp/Systems fileD、Re-enter the command as "cu -s 9600 -dh -t -l tty2"
A system administrator has just applied an update to an AIX system to correct a problem, The APAR number is IX49035 and was shipped as part of the PTF number U437542. After applying the APAR fix, the administrator wants to ensure that the fix is applied before informing the system users of the corrected problem. Which of the following commands should the system administrator run to verify that the APAR fix has been applied to the system?（）A、lslpp -f IX49035B、lslpp -fB U437542C、instfix -f IX49035D、instfix -ik IX49035
单选题A system administrator has created tty2 on a serial port connection to a system. When attempting to verify the connection the following error is observed： # cu -ml tty2 cu： 0835-028 The connection failed. NO DEVICES AVAILABLE. Which of the following should be performed to correct this error？（）ACreate an entry for tty2 in the /etc/uucp/Devices fileBRe-enter the command as cu -dml tty2CCreate an entry for tty2 in the /etc/uucp/Systems fileDRe-enter the command as cu -s 9600 -dh -t -l tty2
单选题Company.com with a newly installed cluster has been checking the logfiles to determine if the cluster has had any recent activity. The non-IP RS232 heartbeat connection seems to be having a difficulty. The serial network goes down，and then a couple of minutes later comes back up again. This pattern is repeated many times in the log. If this system was installed without regard to best practices， what is the most likely problem with the serial network？（）A The serial port is malfunctioning and needs to be repaired.B The baud rate is incorrectly specified in the AIX devices configuration.C The serial port is not a port approved to support HACMP heartbeat traffic.D The baud rate is incorrectly specified in the HACMP interface configuration.
单选题Company.com wishes to use HACMP on two IBM eServer pSeries servers. During the planning session， it was decided to use the native serial ports s1 or s2 for a non-IP heartbeat network. What should be done to ensure the serial network will function with HACMP heartbeats？（）A Use either s1 or s2 port configured as a TTY interface with a NULL Modem cable.B Use the s2 serial port on each system configured as a TTY interface with a NULL modem cable.C Use the s1 port on each system configured as a TTY interface with a standard serial modemcable.D Verify with IBM support which native serial ports for the server model can be used for HACM pheartbeats.
单选题A System p administrator has created a customized security profile using AIX Security Expert. Which of the following commands will apply this to a system（）Aaixpert -f mysec.xmlBaixpert -a mysec.xmlCchsec -f mysec.xmlDchsec -a mysec.xml
单选题An administrator has just imported a shred Volume Group that had been created on another system in the cluster. In order for the shred volume to be used in the cluster， what is the most important step for the administrator to take first？（）A Change the quorum required to false.B Change the Volume Group auto vary on to yes， and then vary off the Volume Group.C Change the auto vary on value of the Volume Group to no， and then vary off the volume group.D Set the Volume Group major number to the same value that the Volume Group had on the system on which it was created.
单选题While troubleshooting a connectivity problem, a network administrator notices that a port status LED on a Cisco Catalyst series switch is alternating green and amber. Which condition could this indicate（）。AThe port is experiencing errorsBThe port is administratively disabledCThe port is blocked by spanning treeDThe port has an active link with normal traffic activity
单选题What interface is created when an FC Port Channel is created on a Cisco Unified Computing System？（）A An interface ’san-port-channel’ in NXOSB An interface ’port-channel’ in NXOSC An interface ’port-channel’ with ’mode fc’ configuredD An interface ’fc-port-channel’ in NXOS
单选题A system administrator has filesystems that should not be mounted during system startup. How can the system administrator prevent the /data filesystem from being mounted during subsequent boots？（）Amount -no /dataBchfs -A no /dataCmount -t nfs /dataDchfs -a type=nfs /data
单选题Given that the current directory is empty， and that the user has read and write privileges to the current directory， and the following： Which statement is true？（）A Compilation fails.B Nothing is added to the file system.C Only a new file is created on the file system.D Only a new directory is created on the file system.E Both a new file and a new directory are created on the file system.