多选题You attach a USB camera to your Windows 2000 Professional computer. Windows 2000 Professional detects the camera and prompts you to install the manufacturer’s device driver. You do it， and then you restart the computer. When Win2000 Professional loads， you notice that your USB keyboard does not respond. You suspect that the camera drivers are not certified for Win2000 Professional. You want to configure your computer to enable your use keyboard and to prevent uncertified drivers from being installed in the future. What should you do？ （）AConfigure Windows 2000 Professional to enable driver signing.BConfigure Windows 2000 Professional to disable driver signing.CStart the computer by using the recovery console， restore the system state data.DStart the computer in safe mode， replace the camera driver with a Windows 2000 Professional driver by using Device Manager.EStart the computer in debug mode， replace the camera driver with a Windows 2000 Professional driver by using Device Manager.
多选题
You attach a USB camera to your Windows 2000 Professional computer. Windows 2000 Professional detects the camera and prompts you to install the manufacturer’s device driver. You do it， and then you restart the computer. When Win2000 Professional loads， you notice that your USB keyboard does not respond. You suspect that the camera drivers are not certified for Win2000 Professional. You want to configure your computer to enable your use keyboard and to prevent uncertified drivers from being installed in the future. What should you do？ （）
A
Configure Windows 2000 Professional to enable driver signing.
B
Configure Windows 2000 Professional to disable driver signing.
C
Start the computer by using the recovery console， restore the system state data.
D
Start the computer in safe mode， replace the camera driver with a Windows 2000 Professional driver by using Device Manager.
E
Start the computer in debug mode， replace the camera driver with a Windows 2000 Professional driver by using Device Manager.
参考解析
解析：
暂无解析
相关考题：
You are the administrator of your company's network. Your network has five Windows 2000 server computers and 75 Windows 2000 Professional computers. The Windows 2000 Professional computers were installed by using a RIS image on one of the Windows 2000 Server computers. You need to upgrade several applications on the Windows 2000 Professional computers. The applications do not have built-in support for scripted installations.You want to accomplish the following goals:1. An unattended installation of the upgraded applications will be performed on the Windows 2000 Professional computers.2. Existing user environments will be maintained on the Windows 2000 Professional computers.3. The network name of each Windows 2000 Professional computer will be changed to match its asset tag.4. The RIS image and the upgraded applications will be enabled as they are added to the network.You take the following actions:1. Install the RIS image on a Windows 2000 Professional computer named Computer1.2. Install the upgraded applications on Computers1.3. Change the network name of Computer1 to %DMI-SERIAL_NUM%.4. Run RIPrep.exe on Computer1 to load the RIS image on to the RIS server.5. Start all of the Windows 2000 Professional computers, and then load the RIS image from the RIS server.Which result or results do these actions produce? (Choose all that apply.)A．An unattended installation of the upgraded applications will be performed on the Windows 2000 Professional computers.B．Existing user environments will be maintained on the Windows 2000 Professional computers.C．The network name of each Windows 2000 Professional computer will be changed to match its asset tag.D．The RIS image and the upgraded applications will be enabled as they are added to the network.
your company has servers that run windows server 2008. All client computers run windows XP service pack 2 (SP2.). windows 2000 professional, or windows vista. You need to ensure all computers can use the IPv6 protocol. What should you do?（）A.Install service pack 4 on all windows 2000 professional computers.B.Upgrade the windows 2000 professional computers to windows XP SP2.C.Run the IPv6.exe tool on the windows 2000 professional and windows XP computers.D.Install active directory client extenticon. (DSClient.exe) on the windows 2000 professional and windows XP computers.
You are the administrator of Ezonexam.com's Windows 2000 network.Your computer is configured to use both Windows 2000 Professional and Windows NT Workstation 4.0 Service Pack 3. Your computer has three hard disks: Disk 0, Disk1, and Disk2. Windows NT Workstation 4.0 is installed on Disk 0. Windows 2000 Professional is installed on Disk1. You want to store your project files on Disk2. You configure Disk2 as a basic volume and format the volume as NTFS in Windows 2000 Professional. You then start Windows NT Workstation 4.0. You find that you cannot access your project files.You want to be able to access your project files when using either of the operating systems.What should you do?A．Upgrade Windows NT Workstation 4.0 to Service Pack 4 or later.B．Configure Disk 2 as a dynamic volume then format as an NTFS partition.C．Configure Disk 2 to use Encrypting File System (EFS).D．Configure Disk 2 as a basic volume and format the volume as FAT32.
You are upgrading a computer from Windows 98 to Windows 2000 Professional. The computer is a 400-Mhz Pentium III, and has 128 MB of RAM and a 10-GB hard disk. You are performing the installation by using the Windows 2000 Professional CD-ROM. After the text mode installation portion is complete, you restart the computer. The BIOS virus checker on your computer indicates you're your computer is infected with a Master Boot Record virus.What should you do before you continue the installation?A．Remove the virus checker in Windows 98.B．Disable the BIOS virus checker and restart the computer.C．Run Fixmbr.Exe from the Windows 2000 Professional CD-ROM.D．Modify the Boot.ini file to include a signature parameter on the ARC path of the system partition.
You attach a USB camera to your Windows 2000 Professional computer. Windows 2000 Professional detects the camera and prompts you to install the manufacturer’s device driver. You do it， and then you restart the computer. When Win2000 Professional loads， you notice that your USB keyboard does not respond. You suspect that the camera drivers are not certified for Win2000 Professional. You want to configure your computer to enable your use keyboard and to prevent uncertified drivers from being installed in the future. What should you do？ （）A、Configure Windows 2000 Professional to enable driver signing.B、Configure Windows 2000 Professional to disable driver signing.C、Start the computer by using the recovery console， restore the system state data.D、Start the computer in safe mode， replace the camera driver with a Windows 2000 Professional driver by using Device Manager.E、Start the computer in debug mode， replace the camera driver with a Windows 2000 Professional driver by using Device Manager.
You have a computer with a USB keyboard that is running Windows 2000 Professional. You install a USB scanner on this system. The system asks for the driver and you install them. After you restart your computer， you notice that the keyboard doesn’t work anymore. What should you do in order to make both， the keyboard and the scanner work？ （）A、Update the scanner drivers using certified driversB、Enable the USB port in the computers BIOSC、USB keyboards DO NOT existD、Enable the USB hub controllerE、Reinstall the USB device driver and disable the USB error detection
You install Windows 2000 Professional on your portable computer. You install an SCSI and PC card adapter, that you can use in the office to use color scanner. You use a docking station for your computer when you are in the office. You want to maximize the battery performance for your portable computer. You also want to prevent the driver from loading whenever you are away from the office. What should you do?（）A、When away from the office use Device Manager to remove the adapter. B、When away from the office configure the startup properties for the adapter to be automatic. C、Remove the computer from the docking station and start Windows 2000 Professional to disable the SCSI PC card adapter device for the current profile.D、Remove the computer from the docking station and start Windows 2000 Professional, use Device Manager to remove SCSI PC card adapter device.
your company has servers that run windows server 2008. All client computers run windows XP service pack 2 (SP2.). windows 2000 professional, or windows vista. You need to ensure all computers can use the IPv6 protocol. What should you do?（）A、Install service pack 4 on all windows 2000 professional computers.B、Upgrade the windows 2000 professional computers to windows XP SP2.C、Run the IPv6.exe tool on the windows 2000 professional and windows XP computers.D、Install active directory client extenticon. (DSClient.exe) on the windows 2000 professional and windows XP computers.
You are the administrator of WXYZ.com Incorporation. Your company’s network consists of Windows 2000 Professional clients and Windows 2000 Servers. Users have started reporting that the network performance has degraded in recent times. Most of the Windows 2000 Professional clients on your network use the TCP/IP protocol to communicate with the Server. You want to increase network performance. Where do you change the binding order？（）A、Windows 2000 Server Network Binding Server TCP/IP on the top.B、Windows 2000 Server Network Binding Workstation TCP/IP on the top.C、Windows 2000 Professional Network Binding Server TCP/IP on the top.D、Windows 2000 Professional Network Binding Server TCP/IP on the bottom.E、Windows 2000 Professional Network Binding Workstation TCP/IP on the top.F、Windows 2000 Professional Network Binding Workstation TCP/IP on thebottom.
Most of the Windows 2000 Professional clients on your network use the TCP/IP Protocol to communicate with Server. You want to increase network performance. Where do you change the binding order of your protocols？ （）A、On the Windows 2000 Server， set TCP/IP for the Server service at the top.B、On the Windows 2000 Professional computers， set TCP/IP for the Workstation service at the top.C、On the Windows 2000 Server， set TCP/IP for the Workstation service at the top.D、On the Windows 2000 Professional computers， set TCP/IP for the Server service at the top.
You are the administrator of your company's network. You install 220 new Windows 2000 Professional computers in the Sales department. Two weeks later users report that five of the computers have stopped responding. You troubleshoot the five computers and find that the users have attached USB devices and have installed device drivers that are not supported by Windows 2000 Professional. You want to ensure that it does not happen again. You decide to configure the computer to install device drivers only for the devices that are included on the current hardware compatibility list (HCL). What should you do?（）A、Use NTFS permission to restrict users access to the C:///WinNT/driver cache folder.B、Use NTFS permission to restrict users access to the C:///WinNT/system32/drivers folder.C、Configure Windows 2000 Professional to enable driver signing verification.D、Configure Windows 2000 Professional to trust the Microsoft certificate authority （CA）.
You have a computer running Windows 2000 Professional. You have purchased a new USB scanner. You attached it to the USB port. When you go to device manager to see the status of the USB port， You did not find any USB controller there. You then reboot your system and go to system BIOS settings and enable the USB Controller. But it is still missing. What should you do to resolve this problem？（）A、Update the scanner drivers using certified driversB、Enable the USB port in the computers BIOS again.C、Contact the maker or vendor for you system and obtain the current version of BIOS.D、Enable the USB hub controller in device manager.E、Reinstall the USB device driver and disable the USB error detection
You are the administrator of your company’s network. Your network consists of 20 Windows 2000 Professional computers. You want to configure all of the computers to allow access to the Internet. Your Budget does not allow for installing a permanent Internet connection for the network. You do have a single dial-up account at a local Internet service provider （ISP） and a 56-Kbps modem. You want the computer to be able to access the Internet when web resources are requested. What should you do？（）A、Configure the shared modem to use software handshakingB、Configure the dial-up connection to enable on-demand dialing.C、Configure the dial-up connection to enable the Internet connection sharing.D、Configure all the other computers to have a dial-up connection that uses the shared modem. E、Attach the modem to one of the Windows 2000 Professional computer， and create a dial-up connection to the ISP.F、Attach the modem to one of the Windows 2000 Professional computers， and share the modem on the network.
You are the administrator of your company’s network. The software department is preparing to rewrite an accounting application so that it will run on Windows 2000 Professional computers. All of the computers in the software department currently use Windows 98. You want to configure the computers in the software department so that the users can use both Windows 98 and Windows 2000 Professional during the project. You also want to ensure that the computers are configured for optimal disk performance. In addition you want to ensure that users in the software department can access all of the files on their computers by using either operating system. What should you do? （）A、 Create and format a FAT 32 partition.B、 Create and format an NTFS volume.C、 Configure Windows 2000 Professional to enable disk compression.D、 Configure Windows 2000 Professional to enable dynamic volume
You are the network administrator for ExamSheet.net. You administer ExamSheet's Windows 2000 network. You want to update the device driver for the network adapter in your Windows 2000 Professional computer. You log on the computer by using the local Administrator account. You use Device Manager to verify that the network adapter is installed on your computer. You select the Driver tab and Update Driver option, and install a new driver from the network adapter manufacturer. You restart the computer. After displaying the Windows 2000 Professional startup screen, your computer displays aCkernel stop error message. You want to configure your computer to start successfully. Which two methods can you use to resolve the problem?（）A、Perform an emergency repair of the system from the Windows 2000 Professional CD-ROM by using the Emergency Repair Disk for the computer.B、Restart the computer. In the Recovery Console， use the Extract utility to reinstall the loopback driver from the Windows 2000 Professional CD-ROM.C、Restart the computer by using the last know good configuration.D、Restart the computer in safe mode and reinstall the original network adapter driver. E、Restart the computer and disable Plug and Play in the computer BIOS.
单选题You have a computer with a USB keyboard that is running Windows 2000 Professional. You install a USB scanner on this system. The system asks for the driver and you install them. After you restart your computer， you notice that the keyboard doesn’t work anymore. What should you do in order to make both， the keyboard and the scanner work？ （）AUpdate the scanner drivers using certified driversBEnable the USB port in the computers BIOSCUSB keyboards DO NOT existDEnable the USB hub controllerEReinstall the USB device driver and disable the USB error detection
单选题As the administrator of your company’s network, you will be installing Windows 2000 Professional on 10 new Pentium III computers. Your company does business with a horde of countries and accepts many currencies. You must ensure that international currency options are set for 5 of the 10 computers. The remaining 5 computers must be configured to support different input locales. How can you most efficiently set the correct international currency options and configure different input locales on each specified group of computers? （）A During the unattended installation of Windows 2000 Professional.B Make the appropriate changes in the regional settings dialogue box during the installation of Windows 2000 Professional.C After Windows 2000 Professional is installed， logon and make the changes through thecontrol panel.D Make the appropriate changes in the date and time settings dialogue box during theinstallation of Windows 2000 Professional.
单选题You are the administrator of WXYZ.com Incorporation. Your company’s network consists of Windows 2000 Professional clients and Windows 2000 Servers. Users have started reporting that the network performance has degraded in recent times. Most of the Windows 2000 Professional clients on your network use the TCP/IP protocol to communicate with the Server. You want to increase network performance. Where do you change the binding order？（）AWindows 2000 Server Network Binding Server TCP/IP on the top.BWindows 2000 Server Network Binding Workstation TCP/IP on the top.CWindows 2000 Professional Network Binding Server TCP/IP on the top.DWindows 2000 Professional Network Binding Server TCP/IP on the bottom.EWindows 2000 Professional Network Binding Workstation TCP/IP on the top.FWindows 2000 Professional Network Binding Workstation TCP/IP on thebottom.
单选题You purchase a USB board, ISDN terminal adapter for your Windows 2000 Professional portable computer. You plug the device in to the USB port. Plug and Play fails to detect the new device. You test the device on a Windows 2000 Professional desktop computer. You find that plug and play correctly detects the device. You want to resolve the problem so that you can use ISDN terminal adapter on your portable computer. What should you do?（）AUse the Device Manager to enable the USB manager root hub.BUse the Device Manager to enable the USB host controller in the current hardware profile.CContact the hardware manufacturer to obtain the upgrade for the Plug and Play BIOS.DTurn off the computer plug in the ISDN terminal host adapter and restart the computer.
单选题You install a SCSI adapter and a SCSI tape drive on your Windows 2000 Professional computer. You start the computer. Windows 2000 Professional detects and installs drivers for the new SCSI devices. Later the same day, you restart your computer. During the startup process, the computer stops loading Windows 2000 Professional. You then restart the computer and it stops again. You want to enable your Windows 2000 Professional computer to start successfully. What should you do? （）AStart the computer in safe mode. Enable driver signing.BStart the computer in safe mode. Use Device Manager to remove the SCSI tape device.CStart the computer by using the Recovery Console. Repair the Master Boot Record by using the fixmbr command.DStart the computer by using the Recovery Console. Disable the SCSI adapter device driver by using the disable command.
单选题You install a SCSI adapter and a SCSI tape drive on your Windows 2000 Professional computer. You start the computer and Windows 2000 Professional detects and installs drivers for the new SCSI devices. Later the same day, you restart your computer. During the startup process, the computer stops loading Windows 2000 Professional. You then restart the computer and it stops again. You want to enable your Windows 2000 Professional computer to start successfully. What should you do?（）AStart the computer in Safe Mode. Enable driver signing.BStart the computer in Safe Mode. Use Device Manager to remove the SCSI tape device.CStart the computer by using the Recovery Console. Repair the Master Boot Record by using the fixmbr command.DStart the computer by using the Recovery Console. Disable the SCSI adapter device driver by using the disable command.
单选题You are the network administrator for Company.com. Your computer has a CD-ROM drive attached to a SCSI adapter. You plan to upgrade your computer from Windows NT Workstation 4.0 to Windows 2000 Professional. You determine that the SCSI adapter is not included on the current Hardware Compatibility List (HCL) and that the original SCSI drivers that you used for Windows NT are not compatible with Windows 2000 Professional. You want to upgrade your computer to Windows 2000 Professional. What should you do?（）A Replace the SCSI adapter card with a Windows 2000 Professional compatible SCSI adapter. Start the installation from the Windows 2000 Professional CD-ROM. Add the new adapter card drivers when you are prompted. B Obtain Windows 2000 drivers from the SCSI adapter manufacturer. Copy the drivers to C:/Winnt folder. Start the installation from the Windows 2000 Professional CD-ROM. C Obtain Windows 2000 drivers from the SCSI adapter manufacturer. Start the installation by using the Windows 2000 Professional CD-ROM- Add the new adapter card drivers when you are prompted. D Modify Config.sys to use your existing SCSI adapter and existing CD-ROM drive. Using Windows NT 4.0, start the installation by running Winnt32.exe from the I386 folder on the Windows 2000 Professional CD-ROM.
多选题You are a network administrator for ExamSheet.net’s Windows 2000 network. Your computer has Windows 2000 Professional installed. Your office has a power utage while you are running the Windows 2000 disk defragmenter. When you restart your computer， you receive the following error message： "Bad or missing operating system". You want your computer to start properly. You want to do this with least amount of administrative effort. What should you do？（）AReinstall the operating systemBStart the computer by using the Windows 2000 Professional CD-ROM.CUse the Recovery Console to repair the Master Boot Record.DUse the Emergency Repair Disk to repair the Master Boot Record.
单选题You want to upgrade your MS Windows 98 computer to Windows 2000 professional. Before the actual installation， you want to know whether your system’s hardware or software is compatible with Windows 2000 professional or not. What you will do. （）AConsult the HCL.BSee the online documentation of Windows 2000 professional. CRun WINNT32/CHECKUPGRADEONLY.DConsult the technical support team of Windows 2000.
单选题You are the administrator of Company.com’s Windows 2000 network. Your computer is configured to use both Windows 2000 Professional and Windows NT Workstation 4.0 Service Pack 3. Your computer has three hard disks: Disk 0, Disk1, and Disk2. Windows NT Workstation 4.0 is installed on Disk 0. Windows 2000 Professional is installed on Disk1. You want to store your project files on Disk2. You configure Disk2 as a basic volume and format the volume as NTFS in Windows 2000 Professional. You then start Windows NT Workstation 4.0. You find that you cannot access your project files. You want to be able to access your project files when using either operating systems. What should you do?（）AUpgrade Windows NT Workstation 4.0 to Service Pack 4 or later.BConfigure Disk 2 as a dynamic volume then format as an NTFS partition.CConfigure Disk 2 to use Encrypting File System （EFS）.DConfigure Disk 2 as a basic volume and forma the volume as FAT32.
单选题Your company has servers that run Windows Server 2008. All client computers run Windows XP Service Pack 2 （SP2）. Windows 2003 Professional， or Windows Vista. You need to ensure all computers can use the IPv6 protocol. What should you do（）AInstall Serivce Pack 4 on all Windows 2000 Professional computersBUpgrade the Windows 2000 professional computers to Windows XP SP2CRun the IPv6.exe tool on the Windows 200 Professional and Windows XP computersDInstall Active Directory Client extention （DSClient.exe） on the Windows 2000 Professional and Windows XP computers.
单选题You have a computer running Windows 2000 Professional. You have purchased a new USB scanner. You attached it to the USB port. When you go to device manager to see the status of the USB port， you did not find any USB controller there. What should you do to resolve this problem？（）AUpdate the scanner drivers using certified driversBEnable the USB port in the computers BIOSCEnable the USB hub controller in device manager.DReinstall the USB device driver and disable the USB error detection
单选题Most of the Windows 2000 Professional clients on your network use the TCP/IP Protocol to communicate with Server. You want to increase network performance. Where do you change the binding order of your protocols？ （）AOn the Windows 2000 Server， set TCP/IP for the Server service at the top.BOn the Windows 2000 Professional computers， set TCP/IP for the Workstation service at the top.COn the Windows 2000 Server， set TCP/IP for the Workstation service at the top.DOn the Windows 2000 Professional computers， set TCP/IP for the Server service at the top.