在抛物线理论中，大小挠度的分界值是（）。A、S0=0.1B、S0=0.04C、S0=0.08D、S0=1
在抛物线理论中，大小挠度的分界值是（）。
- A、S0=0.1
- B、S0=0.04
- C、S0=0.08
- D、S0=1
相关考题：
下列地化参数中可以解释为油层的一组是()。 A、S0=0.2358，S1=15.2375，S2=5.2375B、S0=0.0028，S1=1.2372，S2=2.0083C、S0=0.0037，S1=1.0237，S2=1.1517D、S0=0.1347，S1=2.0705，S2=1.5127
下列那一个命令用于指定物理接口做备份接口？（ ） A、 Quidway(config)#backup intertace s0 B、 Quidway(config-s1)#backup s0 C、 Quidway(config)#backup s0 D、 Quidway(config-if-s1)#hackup intertace s0
Examine the following configuration on Router R1. R1‘s show ip route 172.16.4.1 command list s a route with outgoing interface S0/1/1. Host 172.16.3.3 uses telnet to connect to host 172.16.4.1.What will Router R1 do with the packets generated by host 172.16.3.3 because of the telnet,assuming the packets enter R1‘s F0/0 interface?（）interface Fastethernet 0/0ip address 172.16.1.1 255.255.255.0ip policy route - map Q2!route - map Q2 permitmatch ip address 101set interface s0/0/1!access - list 101 permit tcp host 172.16.3.3 172.16.4.0 0.0.0.255A. The packet will be forwarded out S0/0 /1, or not at all.B. The packet will be forwarded out S0/0/1 if it is up.C. The packet will be forwarded out S0/1/1 if it is up.D. The packet will be forwarded out S0/1/1 if it is up, or if it is not up, out s0/0/1.E. The packet will be forwarded o ut S0/0/1 if it is up, or if it is not up, out s0/1/1.
Router R1 has working interfaces S0/0, S0/1, and S0/2, with IP address/prefix combinations of 10.10.10.1/24, 10.10.11.2/24, and 10.10.12.3/22. R1‘s configuration includes the command s router eigrp 9 and network 10.0.0.0. The show ip eigrp interfaces command lists S0/0 and S0/1 in the command output, but not S0/2.Which answer gives the reason for the omission？（）A. R1 has EIGRP neighbors reachable via S0/0 and S0/1, but not via S0/2, so it is not included.B. S0/2 may currently be in a state other than up/up.C. The network 10.0.0.0 command requires the use of mask 255.0.0.0 due to EIGRP being classful by default.D. S0/2 may be configured as a passive inter face.
Refer to the exhibit.The network administrator is in acampus building distant from Building B.WANRouter is hosting a newly installed WAN link on interface S0/0.The new link is not functioning and the administrator needs to determine if the correct cable has been attached to the S0/0 interface.How can the administrator accurately verify the correct cable type on S0/0 in the most efficient manner?（）A.Telnet to WANRouter and execute the command show interfaces S0/0B.Telnet to WANRouter and execute the commandshow processes S0/0C.Telnet to WANRouter and execute the command show running-configurationD.Telnet to WANRouter and execute the command show controller S0/0E.Physically examine the cable between WANRouter S0/0 and the DCE.F.Establish a console sessionon WANRouter and execute the command show interfaces S0/0
设 AgCl 在水中、在0. 01mol/L NaCl 溶液中、在0. 01mol/L MgCl2 溶液中、在0. 01mol/L AgNO3溶液中的溶解度分别为S0、S1、S2、S3。下列式子中正确的是？A. S0>S3>S2>S1 B. S0>S1=S3>S2C. S0>S1>S2>S3 D. S0>S1=S2=S3
AgCl在水中，0.01mol/L CaCl2 溶液中，0.01mol/L NaCl溶液，0.05mol/L AgNO3 溶液中的溶解度分别为S0、S1、S2、S3,那么下列哪种排列是正确的（ ）。 A. S0>S1>S2>S3 B. S0>S2>S1>S3 C. S0>S1>S2=S3 D. S0>S2>S3>S1
设AgCl在水中、0.01mol·l-1CaCl2、0.01mol·l-1NaCl中以及在0.05mol·l--1AgNO3中的溶解度分别为S0、S1、S2、S3，这些量之间的正确关系是（）。A、S0＞S1＞S2＞S3B、S0＞S2＞S1＞S3C、S0＞S1=S2＞S3D、S0＞S2＞S3＞S1
下列情况下，结论正确的是（）A、当△H0，△S0时，反应自发；B、当△H0，△S0时，反应自发；C、当△H0，△S0时，低温非自发，高温自发；D、当△H0，△S0时，低温非自发，高温自发；E、当△H0，△S0时，任何温度下均不自发
S7-200PLC的堆栈为S0~S8九层，触点块串联指令是将（）中的内容相“与”后，再送入S0中，堆栈中的内容从S2开始依次上跳。A、S0与S1B、S1与S2C、S0与指定继电器D、S1与指定继电器
在N个NO分子组成的晶体中，每个分子都有两种可能的排列方式，即NO和ON， 也可将晶体视为NO和ON的混合物，在绝对零度时该系统的熵值为（）A、S0=0B、S0=kln2C、S0=Nkln2D、S0=2klnNE、S0=Nkln2N
The network administrator is in a campus building distant from Building B. WANRouter is hosting a newly installed WAN link on interface S0/0. The new link is not functioning and the administrator needs to determine if the correct cable has been attached to the S0/0 interface. How can the administrator accurately verify the correct cable type on S0/0 in the most efficient manner（）。A、Telnet to WANRouter and execute the command show interfaces S0/0B、Telnet to WANRouter and execute the command show processes S0/0C、Telnet to WANRouter and execute the command show running-configurationD、Telnet to WANRouter and execute the command show controller S0/0E、Physically examine the cable between WANRouter S0/0 and the DCEF、Establish a console session on WANRouter and execute the command show interfaces S0/0
设AgCl在水中，在0.01mol·L-1CaCl2中，在0.01mol·L-1NaCl中以及在0.01mol·L-1AgNO3中的溶解度分别为S0，S1，S2，S3这些量之间的定量关系正确的是（）。A、S0＞S1＞S2＞S3B、S0＞S2＞S1＞S3C、S0＞S2=S3＞S1D、S3＞S0＞S2＞S1
单选题Router R1 has working interfaces S0/0, S0/1, and S0/2, with IP address/prefix combinations of 10.10.10.1/24, 10.10.11.2/24, and 10.10.12.3/22. R1's configuration includes the command s router eigrp 9 and network 10.0.0.0. The show ip eigrp interfaces command lists S0/0 and S0/1 in the command output, but not S0/2. Which answer gives the reason for the omission？（）AR1 has EIGRP neighbors reachable via S0/0 and S0/1, but not via S0/2, so it is not included.BS0/2 may currently be in a state other than up/up.CThe network 10.0.0.0 command requires the use of mask 255.0.0.0 due to EIGRP being classful by default.DS0/2 may be configured as a passive inter face.
单选题下列情况下，结论正确的是（）。A当ΔH0，ΔS0时，反应自发B当ΔH0，ΔS0时，反应自发C当ΔH0，ΔS0时，低温非自发，高温自发D当ΔH0，ΔS0时，低温非自发，高温自发；