VLAN主干协议VTP的默认工作模式是()A.服务器模式B.客户端模式C.透明模式D.以上三者都不是

VLAN主干协议VTP的默认工作模式是()

A.服务器模式

B.客户端模式

C.透明模式

D.以上三者都不是


相关考题:

“ipaccess-group”命令在接口上缺省的应用方向是什么"()。A.inB.具体取决于接口应用哪个访问控制列表C.outD.无缺省值

IP地址为:192.168.50.70,掩码为:255.255.255.248,则该IP地址所在子网的子网号为()A.192.168.50.32B.192.168.80.64C.192.168.50.96D.192.168.50.71

网络172.12.0.0需要划分子网,要求每个子网中有效IP数为458个,为了保证子网数最大,则掩码应为()A.255.255.255.0B.255.255.254.0C.255.255.0.0D.255.255.248.0

以下对于缺省路由描述正确的是()A.缺省路由是优先被使用的路由B.缺省路由是第一条被使用的路由C.缺省路由是一种特殊的静态路由D.缺省路由是一种特殊的动态路由

OSPF协议中DR和BDR使用的组播地址是()A.224.0.0.1B.224.0.0.5C.224.0.0.8D.224.0.0.9

In the Ezonexam switched LAN environment, what does the IEEE 802.1Q standard describe?A. VLAN pruningB. A method of VLAN trunkingC. An approach to wireless LAN communicationD. The operation of VTPE. The process for root bridge selectionF. None of the above

In which circumstance are multiple copies of the same unicast frame. likely to be transmitted in the Ezonexam Switched LAN?A. During high traffic periodsB. In an improperly implemented redundant topologyC. After broken links are re-establishedD. When upper-layer protocols require high reliabilityE. When a dual ring topology is in useF. None of the above

You are unable to telnet to a router at address 203.125.12.1 from a workstation with the IP address 203.125.12.23. You suspect that there is a problem with the IP protocol stack in your PC. Which of the following actions is most likely to confirm your diagnosis?A. ping 127.0.0.0B. ping 203.125.12.1C. telnet 127.0.0.1D. ping 127.0.0.1E. tracert 203.125.12.1F. None of the above

缺省路由是最后一条被使用的特殊的静态路由。此题为判断题(对,错)。

BPDU防护有何用途?() A.确保端口从正确的上游交换机那里收到了BPDUB.禁止端口接收来自上游交换机的BPDU,而只接收来自根交换机的BPDUC.可在启用了BPDU防护的端口上使用PortFast,在端口收到BPDU时将其关闭D.在端口收到BPDU时将其关闭

The Ezonexam network administrator needs to a switch named VE1 to become the root bridge for a redundant path switched network. What can be done to ensure that VE1 will always assume the role as the root bridge?A.Assign the switch a higher MAC address than the other switches in the network haveB.Establish a direct link from the switch to all other switches in the networkC.Configure the switch full-duplex operation and configure the other switches for half-duplex operationD.Configure the switch so that it has lower priority than other switches in the networkE.None of the above