You are the network administrator for Your network consists of a single Active Directory domain named All domain controllers run Windows Server 2003. TestKing consists of a main office and two branch offices. The company expands to an additional branch office. This branch office has very little available network bandwidth. You need to install a new domain controller named DC9 at the new branch office. Your installation must minimize costs and network traffic. What should you do?（）A、Back up the System State data of an existing domain controller on removable media. Mail a physical copy of the backup to the branch office. Use the backup to install Active Directory on DC9.B、For the branch office, create a new Active Directory site that contains no other domain controllers. Install Active Directory on DC9.C、Place DC9 on an IP subnet that already contains a domain controller. Install Active Directory on DC9. Physically transport DC9 to the branch office.D、Back up the System State data of an existing domain controller. Compress the backup. Copy the backup to DC9 at the branch office. Uncompress the backup. Use the backup to install Active Directory on DC9.
You are the network administrator for Your network consists of a single Active Directory domain named All domain controllers run Windows Server 2003. TestKing consists of a main office and two branch offices. The company expands to an additional branch office. This branch office has very little available network bandwidth. You need to install a new domain controller named DC9 at the new branch office. Your installation must minimize costs and network traffic. What should you do?（）
- A、Back up the System State data of an existing domain controller on removable media. Mail a physical copy of the backup to the branch office. Use the backup to install Active Directory on DC9.
- B、For the branch office, create a new Active Directory site that contains no other domain controllers. Install Active Directory on DC9.
- C、Place DC9 on an IP subnet that already contains a domain controller. Install Active Directory on DC9. Physically transport DC9 to the branch office.
- D、Back up the System State data of an existing domain controller. Compress the backup. Copy the backup to DC9 at the branch office. Uncompress the backup. Use the backup to install Active Directory on DC9.
相关考题：
Your computer has a wired network adapter and a wireless network adapter. You use the wireless network adapter only whe nyou are traveling. You need to configure the network adapter profile settings to ensure that the computer discovers other network devices only when you are at home.Which two actions should you perform?（）A.AB.BC.CD.D
Your computer uses both wired and wireless network connections. The networks are not connected to each other.You disallow incoming connections in Microsoft Windows Firewall. You create a shared folder. Users on the wireless network cannot access the shared folder. You need to allow access to the shared folder from the wireless network. You also need to maintain the security of the wired network.What should you do?（）A.AB.BC.CD.D
Your wireless network is not listed in the Connect to a network window of your computer. You need to connect to your wireless network.Which two actions should you perform?() A.AB.BC.CD.DE.E
You are unable to connect your computer to a wireless network projector. The wireless network projector does not appear in the list of available network projectors provided by the Connect to a Network Projector wizard.You need to connect to the network projector.What are two possible ways to achieve this goal?（）A.AB.BC.CD.D
You have a computer that runs Windows Vista. You create a virtual private network (VPN) connection between the computer and your company’s network.You notice that while the computer is connected through the VPN connection, users on the company network can access shared folders on the computer.You need to prevent network users from accessing your shared folders when you are connected to the company’s network by using the VPN connection.What should you do?（）A.AB.BC.CD.D
You connect your computer to a wireless network. You discover that this new connection fails to show in the Connect to a network window.You need to view this connection in the Connect to a network window.What should you do?（）A.AB.BC.CD.D
You are an administrator of a switched network and your goal is to reduce some of the administrative overhead on your network. You plan on achieving this by configuring a new VLAN for each department in your network. However, you need to share the VLAN information across numerous switches throughout your network. Which of the following would allow you accomplish this?（）A、STPB、GVRPC、SNMPD、VTPE、DHCP
What parameters must you specify when you enable EIGRP routing?（）A、The broadcast address, and AS numberB、The network number and AS numberC、EIGRP routing, network number and passive interfaceD、EIGRP routing, network number, and AS
You are the network consultant from passguide.com. Could you please tell customers what strategy will protect network resources and services from unauthorized actions?（）A、Content storage networkingB、Network optimizationC、Network managementD、Network security
You work as a network administrator at ABC.com. The ABC.com network consists of a single domain named ABC.com. All servers on the ABC.com network have Windows Server 2012 R2 installed.The network as a server named ABC_SR05 that provides DHCP services.You need to create the DHCP scopes to support a subnet that has 800 hosts.You want to minimize the number of unused IP addresses on each subnet. How would you configure DHCP to support these subnets？（）A、You should assign the network 172.16.0.0/16.B、You should assign the network 172.16.0.0/17.C、You should assign the network 172.16.0.0/18.D、You should assign the network 172.16.0.0/19.E、You should assign the network 172.16.0.0/20.F、You should assign the network 172.16.0.0/22.
You are the network administrator for passguide.com. Which device will you install in your computer to make wireless connections you and a network?（）A、RepeaterB、Wireless routerC、HubD、Wireless network adapter
Your network is configured as shown in the following diagram.You deploy an enterprise certification authority （CA） on the internal network. You also deploy a Microsoft Online Responder on the internal network. You need to recommend a secure method for Internet users to verify the validity of individual certificates. The solution must minimize network bandwidth. What should you recommend？（）A、Deploy a subordinate CA on the perimeter network.B、Install a stand-alone CA and the Network Device Enrollment Service （NDES） on a server on the perimeter network.C、Install a Network Policy Server （NPS） on a server on the perimeter network. Redirect authentication requests to a server on the internal network.D、Install Microsoft Internet Information Services （IIS） on a server on the perimeter network. Configure IIS to redirect requests to the Online Responder on the internal network.
Your computer has a wired network adapter and a wireless network adapter. You use the wireless network adapter only when traveling. You need to configure the network adapter profile settings to ensure that other systems are allowed to discover your computer only when you are at home. What are two possible ways to achieve this goal？（）A、When you configure access to the wired network at home， set the wired network adapter location type to Private.B、When you configure access to the wired network at home， set the wired network adapter location type to Public.C、When you configure access to the public wireless access points， set the wireless network adapter location type to Private.D、When you configure access to the public wireless access points， set the wireless network adapter location type to Public.
You are the administrator of ExamSheet.net's network. ExamSheet upgrades its network to 100 Mbps. You remove the old network adapter and install a new 10/100 Mbps network adapter into a Windows 2000 Professional computer. You configure the TCP/IP protocol settings so that IP and DNS addresses are obtained automatically. When you restart the computer you cannot access the network. When you attempt toPINGaddress 127.0.0.1 you receive the following error message: "Request timed out." You want this computer to communicate on the network. What should you do?（）A、Configure IP address settings manually.B、Replace the network adapter.C、Disable TCP/IP filtering for all network adapters.D、Configure DNS server address settings manually.E、Enable IEEE 802.1x authentication.
You are the network administrator for ExamSheet.net. You install Windows 2000 Professional on your portable computer. You use a docking station for your portable computer when you are in the office. You install a ISA-based network adapter in your docking station. You insert your computer into the docking station and start the computer. The network adapter is not detected during the startup process. You obtain a disk that contains the supported driver from the network adapter manufacturer. You want to allow Windows 2000 Professional to use the network adapter. What should you do?（）A、Restart the computer in the docking station.B、Run the Add/Remove Hardware wizard.C、Use Device Manager to scan for hardware changes.D、Copy the network adapter driver to the Winnt/Driver Cache/i386 folder.E、Install the new network adapter driver.
You are the network administrator for Company. Company has recently upgraded its network to a 100Mbps standard and you are now in the process of removing all the old adapter and installing a new Token Ring network adapter into the Windows 2000 Professional computer. On the first computer you install the new hardware and configure the static TCP/IP protocol settings to be the same as they were for the previously installed network adapter. When you restart the computer, however, you cannot access the network. You try to ping your network adapter's TCP/IP address locally. You receive the following error message: "Request timed out." You want to enable the computer to communicate on the new network. What should you do? （）A、Enable DHCP in the TCP/IP properties.B、Replace the Token Ring network adapter with an Ethernet network adapter.C、Configure a different TCP/IP address on the same subnet.D、Configure a valid DNS Server in the TCP/IP properties.
You are the network administrator for your company. The network consists of a single Active Directory domain. The network contains an application server running Windows Server 2003. Users report intermittent slow performance when they access the application server throughout the day. You find out that the network interface on the application server is being heavily used during the periods of slow performance. You suspect that a single computer is causing the problem.You need to create a plan to identify the problem computer. What should you do？（）A、 Monitor the performance monitor counters on the application server by using System Monitor. B、 Monitor the network traffic on the application server by using Network Monitor.C、 Monitor network statistics on the application server by using Task Manager.D、 Run network diagnostics on the application server by using Network Diagnostics.
You are the network administrator for Company.Company has just upgraded its network switches from 10 Mbps to 100 Mbps. After the upgrade， you findthat the 100 Windows 2000 Professional computers on the network are still communicating at only 10Mbps. Company uses NWLink as the only network protocol.You want to enable the computers to communicate at 100 Mbps.What should you do？（）A、Replace the network adapters with 10/100 Mbps network adapters. B、Enable TCP/IP on all of the computers on the network.C、Configure the NWLink frame type of the network adapters to be Ethernet II. D、Configure the NWLink frame type of the network adapters to be Ethernet 802.3.
Your network contains an internal network and a perimeter network.You have one Exchange Server 2010 server on the internal network. You install Windows Server 2008 R2 on a new server in the perimeter network.You need to ensure that you can install the Edge Transport server role on the new server. What should you do？（）A、Join the new server to an Active Directory domain.B、Install Active？ Directory Lightweight Directory Services on the new server.C、Run ImportEdgeConfig.ps1 on the existing Exchange Server 2010 server.D、Open TCP port 88 and TCP port 3268 on the firewall between the perimeter network and the internal network.
You are the network administrator for Company.You need to connect to Company’s network from your Windows 2000 Professional computer at home.You have a DSL line that is used for Internet connectivity. You create an L2TP virtual private network（VPN） connection and are able to connect successfully to Company’s network. While connected toCompany’s network， you are unable to access the Internet.You want to be able to access the Internet while connected to Company’s network.How should you configure the connection properties？（）A、Configure the DSL connection to use PPTP instead of L2TP. B、Enable Internet Connection Sharing for the DSL connection properties. C、CLEAR THE Use default gateway on remote network check box. D、Clear the Require data encryption check box.
You work as the IT professional in an international company which is named wiikigo. You are experienced in implementing and administering a network operating system. You are specialized in configuring IP addressing and services. Configuring name resolution and network access and so on.Your company is desigiing its network. The network will use an IPv6 prefix of 2001:DB8: BBCC:0000::/53. You have to identify an IPv6 addressing scheme that will support 2000 subnets. Which network mask should you use?（）A、You should use /63.B、You should use /64.C、You should use /61.D、You should use /62.
单选题What parameters must you specify when you enable EIGRP routing?（）AThe broadcast address, and AS numberBThe network number and AS numberCEIGRP routing, network number and passive interfaceDEIGRP routing, network number, and AS
单选题You are the network administrator for your company. The network consists of a single Active Directory domain. The domain contains Windows Server 2003 computers and Windows XP Professional computers. You configure a server named Server1 to be a file server. The written company security policy states that you must analyze network traffic that is sent to and from all file servers.You need to capture file-transfer network traffic that is being sent to and from Server1. You install Network Monitor Tools from a Windows Server 2003 product CD-ROM on a server named Server2， which is on the same network segment as Server1.You run Network Monitor on Server2. However， Network Monitor captures only network traffic that is sent to and from Server2. You need to capture all network traffic that is sent to and from Server1. What should you do？（）AInstall the Network Monitor driver on Server1. Run Network Monitor on Server2 to capture network traffic.BOpen Network Monitor on Server2 and create a capture filter to enable the capture of all protocols. Run Network Monitor to capture network traffic.CInstall Network Monitor Tools on Server1. Run Network Monitor to capture network traffic.DOpen Network Monitor on Server2 and increase the capture buffer from 1 MB to 20 MB in size. Run Network Monitor to capture network traffic.
单选题You are an administrator of a switched network and your goal is to reduce some of the administrative overhead on your network. You plan on achieving this by configuring a new VLAN for each department in your network. However, you need to share the VLAN information across numerous switches throughout your network. Which of the following would allow you accomplish this?（）ASTPBGVRPCSNMPDVTPEDHCP
多选题Your computer has a wired network adapter and a wireless network adapter. You use the wireless network adapter only when you are traveling. You need to configure the network adapter profile settings to ensure that the computer discovers other network devices only when you are at home. Which two actions should you perform？（）AWhen you configure access to the wired network at home， set the wired network adapter location type to Public.BWhen you configure access to the wired network at home， set the wired network adapter location type to Private.CWhen you configure access to the public wireless access points， set the wireless network adapter location type to Public.DWhen you configure access to the public wireless access points， set the wireless network adapter location type to Private.
单选题You are using Windows 2000 Professional on your desktop computer. You are working on the company’s financial report and you want other users on the network to able to modify your documents for the report. You want users to share the financial report folder on the network. Because the network contains confidential information you want to prevent users from the enabling off line access for the network share that contains the financial report. What should you do？（）AUse Windows Explorer to receive the offline filesBUsing the Windows Explorer, disable the cache for the reports on the network shareCUse the Windows NT explorer to grant the special access for the reports on the network shareDUse the synchronization manager to configure synchronization not to occur when users are connected to the LAN connection.
单选题You connect your computer to a wireless network. You discover that this new connection fails to show in the Connect to a network window. You need to view this connection in the Connect to a network window. What should you do？（）AClick the Diagnose and repair link.BEnable the Turn on notification of new networks option.CConfigure the Connect to a network window to show all networks.DDisable the Connect automatically when this network is in range option， and then enable the Connect even if the network is not broadcasting option.
单选题Your Company upgrades its network to 100 Mbps. You remove the old network adapter and install a new 10/100 Mbps network adapter into a Windows 2000 Professional computer. You configure the TCP/IP protocol settings to be the same as they were for the previously installed network adapter. When you restart eh computer, however, you cannot access the network. You try to ping your network adapter’s TCP/IP address locally. You receive the following error message. “Request timed out.” Next, you try to ping 127.0.0.1 and receive the same error message. What must you do?（）AConfigure a different TCP/IP addressBEnable DHCP in the TCP/IP propertiesCEnable DNS in the TCP/IP propertiesDConfigure the network adapter to run at 100 Mbps onlyEReplace the network adapter.