单选题Your Company upgrades its network to 100 Mbps. You remove the old network adapter and install a new 10/100 Mbps network adapter into a Windows 2000 Professional computer. You configure the TCP/IP protocol settings to be the same as they were for the previously installed network adapter. When you restart eh computer, however, you cannot access the network. You try to ping your network adapter’s TCP/IP address locally. You receive the following error message. “Request timed out.” Next, you try to ping 127.0.0.1 and receive the same error message. What must you do?（）AConfigure a different TCP/IP addressBEnable DHCP in the TCP/IP propertiesCEnable DNS in the TCP/IP propertiesDConfigure the network adapter to run at 100 Mbps onlyEReplace the network adapter.
单选题
Your Company upgrades its network to 100 Mbps. You remove the old network adapter and install a new 10/100 Mbps network adapter into a Windows 2000 Professional computer. You configure the TCP/IP protocol settings to be the same as they were for the previously installed network adapter. When you restart eh computer, however, you cannot access the network. You try to ping your network adapter’s TCP/IP address locally. You receive the following error message. “Request timed out.” Next, you try to ping 127.0.0.1 and receive the same error message. What must you do?（）
A
Configure a different TCP/IP address
B
Enable DHCP in the TCP/IP properties
C
Enable DNS in the TCP/IP properties
D
Configure the network adapter to run at 100 Mbps only
E
Replace the network adapter.
参考解析
解析：
暂无解析
相关考题：
You are the administrator of Company.com's Windows 2000 Network. The routed TCP/IP network that you administer consists of 10 Windows 2000 Server computers and 75 Windows 2000 Professional computers. All computers are members of a single Windows 2000 domain named Company.com. TCP/IP is the only network protocol used at Company's office. You have recently installed 10 new Windows 2000 Professional computers and you want to enable the new computers to use host names to connect to shared resources on the network. You configure a TCP/IP address and a gateway address on each new computer. You want to complete the configuration to allow the computers to communicate on the network. What should you do?（）A、Configure a DNS suffix.B、Configure a subnet mask.C、Configure an LMHOSTS file.D、Configure an Interface metric.E、Configure at least one DNS address.
You want to connect your Windows 2000 Professional computer to multiple TCP/IP subnets on your company’s network. Your computer currently has an ISA network adapter installed. You install a second ISA network adapter. After you restart your computer， you notice that the second ISA network adapter is not functioning. What should you do？（）A、Set the driver signing option to block.B、Set the driver signing option to ignore.C、In the computer’s BIOS， reserve an unused IRQ for ISA devices.D、In the Device Manager， configure the second ISA network adapter to use an unused IRQ.
You are the network administrator for Company. Your network consists of one Windows NT Server 4.0 domain and 35 Windows 2000 Professional computers. The network consists of five interconnected TCP/IP subnets. All of the computers use TCP/IP as the only network protocol. You are adding 15 Windows 2000 Professional computers to the network. You configure each of the new computers to use DHCP. The computers can communicate with each other but are unable to communicate outside their own subnet. You run the ipconfig command to examine the UP address on one of the new computers. The IP address is 169.254.101.72 You want to enable the Windows 2000 Professional computers to communicate outside their own subnet. What should you do?（）A、Install a DHCP server.B、Install a WINS server. Configure each computer to use WINS.C、Create an Lmhost file on each computer.D、Create a Hosts file on each computer.
Your routed TCP/IP network consists of 10 Windows 2000 Server computers and 75 Windows 2000 Professional computers. Your network uses TCP/IP as the only network protocol. You are installing 10 new Windows 2000 Professional computers. You want to enable the new computers to use NetBIOS names to connect to all shared resources as the network. You configure a TCP/IP address and a subnet mask on each new computer. Which 2 additional TCP/IP properties should you configure on each new computer？（）A、The bindings.B、A DNS address.C、A Gateway address.D、A WINS server address.E、A DHCP server address.
You are the administrator of Company.com’s Windows 2000 Network. Your routed TCP/IP network consists of 10 Windows 2000 Server computers and 75 Windows 2000 Professional computers. All computers are in the Company.com domain. Your network uses TCP/IP as the only network protocol. You are installing 10 new Windows 2000 Professional computers. You want to enable the new computers to use host names to connect to shared resources on the network. You configure a TCP/IP address, a gateway address and a subnet mask on each new computer. You want to complete the configuration to allow the computers to communicate on the network. What should you do?（）A、Configure a HOSTS file.B、Configure a LMHOSTS file.C、Configure a WINS server database.D、Configure a DHCP server address.E、Configure at least one DNS address.
You are the administrator of ExamSheet.net's network. ExamSheet upgrades its network to 100 Mbps. You remove the old network adapter and install a new 10/100 Mbps network adapter into a Windows 2000 Professional computer. You configure the TCP/IP protocol settings so that IP and DNS addresses are obtained automatically. When you restart the computer you cannot access the network. When you attempt toPINGaddress 127.0.0.1 you receive the following error message: "Request timed out." You want this computer to communicate on the network. What should you do?（）A、Configure IP address settings manually.B、Replace the network adapter.C、Disable TCP/IP filtering for all network adapters.D、Configure DNS server address settings manually.E、Enable IEEE 802.1x authentication.
You are the network administrator for ExamSheet.net. You install Windows 2000 Professional on your portable computer. You use a docking station for your portable computer when you are in the office. You install a ISA-based network adapter in your docking station. You insert your computer into the docking station and start the computer. The network adapter is not detected during the startup process. You obtain a disk that contains the supported driver from the network adapter manufacturer. You want to allow Windows 2000 Professional to use the network adapter. What should you do?（）A、Restart the computer in the docking station.B、Run the Add/Remove Hardware wizard.C、Use Device Manager to scan for hardware changes.D、Copy the network adapter driver to the Winnt/Driver Cache/i386 folder.E、Install the new network adapter driver.
The network at Company Ltd. consists of one Windows NT Server 4.0 domain and 35 Windows 2000Professional computers. The Company network consists of five interconnected TCP/IP subnets. All of thecomputers use TCP/IP as the only network protocol.You are adding 15 Windows 2000 Professional computers to the network. You want to enable theWindows 2000 Professional computers to resolve NetBIOS names to TCP/IP addresses.What should you do？ （）A、Install a DHCP server. Configure each computer to use DHCP. B、Install a WINS server. Configure each computer to use WINS. C、Create a Lmhosts.sam file on each computer. Add an entry containing the TCP/IP address and NetBIOS name for each computer on the network. D、Create a Hosts.sam file on each computer. Add an entry containing the TCP/IP address and NetBIOS name for each computer on the network.
You are the network administrator for Company. Company has recently upgraded its network to a 100Mbps standard and you are now in the process of removing all the old adapter and installing a new Token Ring network adapter into the Windows 2000 Professional computer. On the first computer you install the new hardware and configure the static TCP/IP protocol settings to be the same as they were for the previously installed network adapter. When you restart the computer, however, you cannot access the network. You try to ping your network adapter's TCP/IP address locally. You receive the following error message: "Request timed out." You want to enable the computer to communicate on the new network. What should you do? （）A、Enable DHCP in the TCP/IP properties.B、Replace the Token Ring network adapter with an Ethernet network adapter.C、Configure a different TCP/IP address on the same subnet.D、Configure a valid DNS Server in the TCP/IP properties.
You are the administrator of a small server based network. While installing Windows 2000 Professional on your computer, you configure the network adapter card for each computer to use TCP/IP and assign static IP setting information. During installation the setup detects and installs the 10/100 MBPS UTP only network adepter card on computers 6 8 and 10 MBPS/UTP combination adapter card on the other 7 computers. You accept the default settings for the network adapter card and finish installing the network adapter card. All computers are connected to 10/100 switch that has category 5 UTP cabling. After installation you find that computer 6 and 8 can communicate with each other. You want all 9 computers on your network to be able to communicate with each other. What should you do?（）A、Configure the 10/100 switch to transfer only at the 100 MBPS rate.B、Configure 10/100 MBPS network adapter card to switch all the computers at 10 MBPS rate.C、Change the combination network adapter card to use the BNC transceiver setting.D、Change the combination network adapter card to use the UTP transceiver setting.
You are the network administrator for Company.Company has just upgraded its network switches from 10 Mbps to 100 Mbps. After the upgrade， you findthat the 100 Windows 2000 Professional computers on the network are still communicating at only 10Mbps. Company uses NWLink as the only network protocol.You want to enable the computers to communicate at 100 Mbps.What should you do？（）A、Replace the network adapters with 10/100 Mbps network adapters. B、Enable TCP/IP on all of the computers on the network.C、Configure the NWLink frame type of the network adapters to be Ethernet II. D、Configure the NWLink frame type of the network adapters to be Ethernet 802.3.
You have a 10Mbps network card in your computer. You install a 100Mbps network card on your computer and restart the computer. The 100Mbps card in not working due to a conflict with the10Mbps card. You want only the 100Mbps card to be active. What should you do to disable the10 Mbps network adapter？（）A、Remove the 100MB Ethernet adapter driver by using device manager.B、Remove the drivers for both Ethernet adapters cards by using device manager. C、Install the 100MB Ethernet adapter in different PC card slots.D、Disable the device drivers for the 10Mb card using by using Device Manager.
Your Company upgrades its network to 100 Mbps. You remove the old network adapter and install a new 10/100 Mbps network adapter into a Windows 2000 Professional computer. You configure the TCP/IP protocol settings to be the same as they were for the previously installed network adapter. When you restart eh computer, however, you cannot access the network. You try to ping your network adapter’s TCP/IP address locally. You receive the following error message. “Request timed out.” Next, you try to ping 127.0.0.1 and receive the same error message. What must you do?（）A、Configure a different TCP/IP addressB、Enable DHCP in the TCP/IP propertiesC、Enable DNS in the TCP/IP propertiesD、Configure the network adapter to run at 100 Mbps onlyE、Replace the network adapter.
Your company has just upgraded its CATAGORY 5 Ethernet network from 10Mbps to 100Mbps. After the upgrade， the 20 Windows 2000 Professional computers in the marketing department can no longer connect to the network. The remaining 80 Windows 2000 computers in the company can connect， however. Your company uses NWLink as the only network protocol.You need to connect the computers in the marketing department to the network. What must you do？ （）A、Configure the NWLink frame type of the network adapters to be ethernet 802.3.B、Configure the NWLink frame type of the network adapters to be ethernet II.C、Replace the network adapters with 10/100 BNC adapters.D、Replace the network adapters with 10/100 UTP network adapters.
You are the network administrator for ExamSheet.net. You administer ExamSheet's Windows 2000 network. You want to update the device driver for the network adapter in your Windows 2000 Professional computer. You log on the computer by using the local Administrator account. You use Device Manager to verify that the network adapter is installed on your computer. You select the Driver tab and Update Driver option, and install a new driver from the network adapter manufacturer. You restart the computer. After displaying the Windows 2000 Professional startup screen, your computer displays aCkernel stop error message. You want to configure your computer to start successfully. Which two methods can you use to resolve the problem?（）A、Perform an emergency repair of the system from the Windows 2000 Professional CD-ROM by using the Emergency Repair Disk for the computer.B、Restart the computer. In the Recovery Console， use the Extract utility to reinstall the loopback driver from the Windows 2000 Professional CD-ROM.C、Restart the computer by using the last know good configuration.D、Restart the computer in safe mode and reinstall the original network adapter driver. E、Restart the computer and disable Plug and Play in the computer BIOS.
单选题You are the network administrator for Company. Company has recently upgraded its network to a 100Mbps standard and you are now in the process of removing all the old adapter and installing a new Token Ring network adapter into the Windows 2000 Professional computer. On the first computer you install the new hardware and configure the static TCP/IP protocol settings to be the same as they were for the previously installed network adapter. When you restart the computer, however, you cannot access the network. You try to ping your network adapter's TCP/IP address locally. You receive the following error message: "Request timed out." You want to enable the computer to communicate on the new network. What should you do? （）AEnable DHCP in the TCP/IP properties.BReplace the Token Ring network adapter with an Ethernet network adapter.CConfigure a different TCP/IP address on the same subnet.DConfigure a valid DNS Server in the TCP/IP properties.
多选题Your routed TCP/IP network consists of 10 Windows 2000 Server computers and 75 Windows 2000 Professional computers. Your network uses TCP/IP as the only network protocol. You are installing 10 new Windows 2000 Professional computers. You want to enable the new computers to use NetBIOS names to connect to all shared resources as the network. You configure a TCP/IP address and a subnet mask on each new computer. Which 2 additional TCP/IP properties should you configure on each new computer？（）AThe bindings.BA DNS address.CA Gateway address.DA WINS server address.EA DHCP server address.
单选题You are the administrator of ExamSheet.net's network. ExamSheet upgrades its network to 100 Mbps. You remove the old network adapter and install a new 10/100 Mbps network adapter into a Windows 2000 Professional computer. You configure the TCP/IP protocol settings so that IP and DNS addresses are obtained automatically. When you restart the computer you cannot access the network. When you attempt toPINGaddress 127.0.0.1 you receive the following error message: "Request timed out." You want this computer to communicate on the network. What should you do?（）AConfigure IP address settings manually.BReplace the network adapter.CDisable TCP/IP filtering for all network adapters.DConfigure DNS server address settings manually.EEnable IEEE 802.1x authentication.
单选题You want to connect your Windows 2000 Professional computer to multiple TCP/IP subnets on your company’s network. Your computer currently has an ISA network adapter installed. You install a second ISA network adapter. After you restart your computer， you notice that the second ISA network adapter is not functioning. What should you do？（）ASet the driver signing option to block.BSet the driver signing option to ignore.CIn the computer’s BIOS， reserve an unused IRQ for ISA devices.DIn the Device Manager， configure the second ISA network adapter to use an unused IRQ.
多选题You are the administrator of Company.com’s Windows 2000 Network. Your routed TCP/IP network consists of 10 Windows 2000 Server computers and 75 Windows 2000 Professional computers. All computers are in the Company.com domain. Your network uses TCP/IP as the only network protocol. You are installing 10 new Windows 2000 Professional computers. You want to enable the new computers to use host names to connect to shared resources on the network. You configure a TCP/IP address, a gateway address and a subnet mask on each new computer. You want to complete the configuration to allow the computers to communicate on the network. What should you do?（）AConfigure a HOSTS file.BConfigure a LMHOSTS file.CConfigure a WINS server database.DConfigure a DHCP server address.EConfigure at least one DNS address.
多选题You are the administrator of Company.com's Windows 2000 Network. The routed TCP/IP network that you administer consists of 10 Windows 2000 Server computers and 75 Windows 2000 Professional computers. All computers are members of a single Windows 2000 domain named Company.com. TCP/IP is the only network protocol used at Company's office. You have recently installed 10 new Windows 2000 Professional computers and you want to enable the new computers to use host names to connect to shared resources on the network. You configure a TCP/IP address and a gateway address on each new computer. You want to complete the configuration to allow the computers to communicate on the network. What should you do?（）AConfigure a DNS suffix.BConfigure a subnet mask.CConfigure an LMHOSTS file.DConfigure an Interface metric.EConfigure at least one DNS address.
单选题Your company has just upgraded its CATAGORY 5 Ethernet network from 10Mbps to 100Mbps. After the upgrade， the 20 Windows 2000 Professional computers in the marketing department can no longer connect to the network. The remaining 80 Windows 2000 computers in the company can connect， however. Your company uses NWLink as the only network protocol.You need to connect the computers in the marketing department to the network. What must you do？ （）AConfigure the NWLink frame type of the network adapters to be ethernet 802.3.BConfigure the NWLink frame type of the network adapters to be ethernet II.CReplace the network adapters with 10/100 BNC adapters.DReplace the network adapters with 10/100 UTP network adapters.
单选题Your Company upgrades its network to 100 Mbps. You remove the old network adapter and install a new 10/100 Mbps network adapter into a Windows 2000 Professional computer. You configure the TCP/IP protocol settings to be the same as they were for the previously installed network adapter. When you restart eh computer, however, you cannot access the network. You try to ping your network adapter’s TCP/IP address locally. You receive the following error message. “Request timed out.” Next, you try to ping 127.0.0.1 and receive the same error message. What must you do?（）AConfigure a different TCP/IP addressBEnable DHCP in the TCP/IP propertiesCEnable DNS in the TCP/IP propertiesDConfigure the network adapter to run at 100 Mbps onlyEReplace the network adapter.
单选题You have a 10Mbps network card in your computer. You install a 100Mbps network card on your computer and restart the computer. The 100Mbps card in not working due to a conflict with the10Mbps card. You want only the 100Mbps card to be active. What should you do to disable the10 Mbps network adapter？（）ARemove the 100MB Ethernet adapter driver by using device manager.BRemove the drivers for both Ethernet adapters cards by using device manager. CInstall the 100MB Ethernet adapter in different PC card slots.DDisable the device drivers for the 10Mb card using by using Device Manager.
多选题You are the network administrator for ExamSheet.net. You install Windows 2000 Professional on your portable computer. You use a docking station for your portable computer when you are in the office. You install a ISA-based network adapter in your docking station. You insert your computer into the docking station and start the computer. The network adapter is not detected during the startup process. You obtain a disk that contains the supported driver from the network adapter manufacturer. You want to allow Windows 2000 Professional to use the network adapter. What should you do?（）ARestart the computer in the docking station.BRun the Add/Remove Hardware wizard.CUse Device Manager to scan for hardware changes.DCopy the network adapter driver to the Winnt/Driver Cache/i386 folder.EInstall the new network adapter driver.
单选题You are the administrator of a small server based network. While installing Windows 2000 Professional on your computer, you configure the network adapter card for each computer to use TCP/IP and assign static IP setting information. During installation the setup detects and installs the 10/100 MBPS UTP only network adepter card on computers 6 8 and 10 MBPS/UTP combination adapter card on the other 7 computers. You accept the default settings for the network adapter card and finish installing the network adapter card. All computers are connected to 10/100 switch that has category 5 UTP cabling. After installation you find that computer 6 and 8 can communicate with each other. You want all 9 computers on your network to be able to communicate with each other. What should you do?（）AConfigure the 10/100 switch to transfer only at the 100 MBPS rate.BConfigure 10/100 MBPS network adapter card to switch all the computers at 10 MBPS rate.CChange the combination network adapter card to use the BNC transceiver setting.DChange the combination network adapter card to use the UTP transceiver setting.
单选题You are the network administrator for Company. Your network consists of one Windows NT Server 4.0 domain and 35 Windows 2000 Professional computers. The network consists of five interconnected TCP/IP subnets. All of the computers use TCP/IP as the only network protocol. You are adding 15 Windows 2000 Professional computers to the network. You configure each of the new computers to use DHCP. The computers can communicate with each other but are unable to communicate outside their own subnet. You run the ipconfig command to examine the UP address on one of the new computers. The IP address is 169.254.101.72 You want to enable the Windows 2000 Professional computers to communicate outside their own subnet. What should you do?（）AInstall a DHCP server.BInstall a WINS server. Configure each computer to use WINS.CCreate an Lmhost file on each computer.DCreate a Hosts file on each computer.
单选题You are the network administrator for Company.Company has just upgraded its network switches from 10 Mbps to 100 Mbps. After the upgrade， you findthat the 100 Windows 2000 Professional computers on the network are still communicating at only 10Mbps. Company uses NWLink as the only network protocol.You want to enable the computers to communicate at 100 Mbps.What should you do？（）AReplace the network adapters with 10/100 Mbps network adapters. BEnable TCP/IP on all of the computers on the network.CConfigure the NWLink frame type of the network adapters to be Ethernet II. DConfigure the NWLink frame type of the network adapters to be Ethernet 802.3.