You are the desktop administrator for ExamSheet. Your Windows 2000 Professional computer is configured to support two monitors. You install a DOS-based application on your computer. The application uses the Windows 2000 Professional default settings Autoexec.nt and Config.nt. Your primary video adapter is set to 24 bit color, 800 x 600 resolution, and default refresh rates. Your secondary video adapter is set to 32 bit color, 1024 x 768 resolution, and a refresh refresh of 72 hertz. You create a shortcut for the DOS-based application on the secondary monitor's desktop and use the default PIF settings. You attempt to run the DOS-based application on the secondary monitor. The application opens, but the display area is scrambled. You then attempt to run the DOS-based application on the primary monitor. The application does not open. Both monitors function correctly when you run Windows based applications. You want to be able to run the DOS-based application on either monitor. What should you do?（）A、Reconfigure the shortcut properties to run the DOS-based application in full screen mode.B、Reconfigure the PIF settings of the DOS-based application to start in a window.C、Change the drivers for both video adapters from WDM compliant drivers to DOS drivers.D、Change the refresh rate setting to 72 hertz for both video adapters.E、Change the color setting for both video adapters to 256 colors.
You are the desktop administrator for ExamSheet. Your Windows 2000 Professional computer is configured to support two monitors. You install a DOS-based application on your computer. The application uses the Windows 2000 Professional default settings Autoexec.nt and Config.nt. Your primary video adapter is set to 24 bit color, 800 x 600 resolution, and default refresh rates. Your secondary video adapter is set to 32 bit color, 1024 x 768 resolution, and a refresh refresh of 72 hertz. You create a shortcut for the DOS-based application on the secondary monitor's desktop and use the default PIF settings. You attempt to run the DOS-based application on the secondary monitor. The application opens, but the display area is scrambled. You then attempt to run the DOS-based application on the primary monitor. The application does not open. Both monitors function correctly when you run Windows based applications. You want to be able to run the DOS-based application on either monitor. What should you do?（）
- A、Reconfigure the shortcut properties to run the DOS-based application in full screen mode.
- B、Reconfigure the PIF settings of the DOS-based application to start in a window.
- C、Change the drivers for both video adapters from WDM compliant drivers to DOS drivers.
- D、Change the refresh rate setting to 72 hertz for both video adapters.
- E、Change the color setting for both video adapters to 256 colors.
相关考题：
Your computer runs Microsoft Windows XP Professional. You share your computer with two other co-workers. You purchase a new computer. You install Microsoft Windows Vista on the new computer. You need to migrate the following content from the old computer to the new computer:All system and program settingsAll users settingsOnly the content in the C:\Appdata folderWhich tool should you use?（）A.AB.BC.CD.D
You attach a USB camera to your Windows 2000 Professional computer. Windows 2000 Professional detects the camera and prompts you to install the manufacturer’s device driver. You do it， and then you restart the computer. When Win2000 Professional loads， you notice that your USB keyboard does not respond. You suspect that the camera drivers are not certified for Win2000 Professional. You want to configure your computer to enable your use keyboard and to prevent uncertified drivers from being installed in the future. What should you do？ （）A、Configure Windows 2000 Professional to enable driver signing.B、Configure Windows 2000 Professional to disable driver signing.C、Start the computer by using the recovery console， restore the system state data.D、Start the computer in safe mode， replace the camera driver with a Windows 2000 Professional driver by using Device Manager.E、Start the computer in debug mode， replace the camera driver with a Windows 2000 Professional driver by using Device Manager.
You want to upgrade your MS Windows 98 computer to Windows 2000 professional. Before the actual installation， you want to know whether your system’s hardware or software is compatible with Windows 2000 professional or not. What you will do. （）A、Consult the HCL.B、See the online documentation of Windows 2000 professional. C、Run WINNT32/CHECKUPGRADEONLY.D、Consult the technical support team of Windows 2000.
You are using windows installer to deploy an application to 750 Windows 2000 Professional computers on your network. The network includes organizational unit （OU） named sales. A Group Policy object （GPO） is created for the Sales OU. You want to deploy that application in such a way that the shortcuts of that application should be created on the used desktop as well as in start-menu. When a user first click on the shortcut or try to open any file whose extension is associated with that application， then that application should automatically install on the computer. What should you do to accomplish this task？（）A、Using GPO， publish that application at user levelB、Using GPO， assign that application at the user levelC、Using GPO， publish that application at computer levelD、Using GPO， assign that application at the computer level.
You install a SCSI adapter and a SCSI tape drive on your Windows 2000 Professional computer. You start the computer and Windows 2000 Professional detects and installs drivers for the new SCSI devices. Later the same day, you restart your computer. During the startup process, the computer stops loading Windows 2000 Professional. You then restart the computer and it stops again. You want to enable your Windows 2000 Professional computer to start successfully. What should you do?（）A、Start the computer in Safe Mode. Enable driver signing.B、Start the computer in Safe Mode. Use Device Manager to remove the SCSI tape device.C、Start the computer by using the Recovery Console. Repair the Master Boot Record by using the fixmbr command.D、Start the computer by using the Recovery Console. Disable the SCSI adapter device driver by using the disable command.
You are the desktop administrator for ExamSheet. Your Windows 2000 Professional computer is configured to support two monitors. You install a DOS-based application on your computer. The application uses the Windows 2000 Professional default settings Autoexec.nt and Config.nt. Your primary and secondary video adapters are both set to 32 bit color, 800 x 600 resolution, and default refresh rates. You create a shortcut for the DOS-based application on the primary monitor's desktop and use the default PIF settings. You attempt to run the DOS-based application on the primary monitor. The application opens, but the display area is scrambled. You then attempt to run the DOS-based application on the secondary monitor. The application does not open. Both monitors function correctly when you run Windows based applications. You want to be able to run the DOS-based application on either monitor. What should you do?（）A、Reconfigure the PIF settings of the DOS-based application to start in a window.B、Reconfigure the shortcut properties to run the DOS-based application in full screen mode.C、Change the drivers for both video adapters from WDM compliant drivers to DOS drivers.D、Change the refresh rate setting to 72 hertz for both video adapters.E、Change the color setting for both video adapters to 256 colors.
You want to install Windows 2000 Professional on 45 new computers on your company’s network. You first install Windows 2000 Professional on one of the new computers. You log on to the computer by using the local administrator account. You install Microsoft Office 97, a virus scanner, and other company-standard applications. You then create a RIS image of the computer you configured. You want to configure the RIS image so that the standard applications will be accessible to the user when the user first logs on to the network. What should you do?（）A、Run Rbfg.exe before installing the standard applications. B、Run RIPrep.exe before installing the standard applications. C、Copy the all users profile to the default users profile.D、Copy the local administrator account profile to the default users profile
You are auditing some events on your Windows 2000 Professional computer. You make changes in the system time of this computer. Under what event will this log be generated in the event viewer？ （）A、Privilege UseB、Object UseC、Security Settings UseD、System Use
You install a 16-Bit ISA sound card on your Windows 2000 Professional computer. You install the manufacturer’s device driver for the sound card. You then restart the computer. During the start up process, the computer stops loading and Windows 2000 Professional. You restart the computer, and again the computer stops loading Windows 2000 Professional computer. You start the computer in Safe Mode. What should you do next?（）A、Remove the sound card device driver by enabling driver signing.B、Remove the sound card device driver by disabling driver signing.C、Disable the sound card device driver by using the disable command.D、Disable the sound card device driver by using computer management.
You are the desktop administrator for your company's sales department. Susan is a user in the sales department. Susan's computer currently runs Microsoft Windows NT Workstation 4. 0. Susan uses a legacy application that is compatible with only Windows NT Workstation. You want to install Windows XP Professional on Susan's computer. You plan to set up a dual-boot configuration so that Susan can run either Windows XP Professional or Windows NT Workstation. Susan's computer has two hard disks, named drive C and drive G. You install Windows XP Professional on drive G. After Windows XP Professional is installed, Susan reports that Windows NT Workstation is no longer available. You need to ensure that both operating systems are available on Susan's computer. What should you do?（） A、Insert the Windows XP Professional CD-ROM into the computer. Run the Sfc.exe /scannow command.B、Insert the Windows XP Professional CD-ROM into the computer. Run the Winnt32. exe /cmdcons command.C、Start the computer by using an MS-DOS bootable floppy disk. Run the Attrib.exe -r -h -s c：/bootsect.dos command.D、Start the computer by using the Windows XP Professional CD-ROM. From the Recovery console， run the Bootcfg /rebuild command.
You install Windows 2000 Professional on your portable computer. You install an SCSI and PC card adapter, that you can use in the office to use color scanner. You use a docking station for your computer when you are in the office. You want to maximize the battery performance for your portable computer. You also want to prevent the driver from loading whenever you are away from the office. What should you do?（）A、When away from the office use Device Manager to remove the adapter. B、When away from the office configure the startup properties for the adapter to be automatic. C、Remove the computer from the docking station and start Windows 2000 Professional to disable the SCSI PC card adapter device for the current profile.D、Remove the computer from the docking station and start Windows 2000 Professional, use Device Manager to remove SCSI PC card adapter device.
As the administrator of your company’s network, you will be installing Windows 2000 Professional on 10 new Pentium III computers. Your company does business with a horde of countries and accepts many currencies. You must ensure that international currency options are set for 5 of the 10 computers. The remaining 5 computers must be configured to support different input locales. How can you most efficiently set the correct international currency options and configure different input locales on each specified group of computers? （）A、 During the unattended installation of Windows 2000 Professional.B、 Make the appropriate changes in the regional settings dialogue box during the installation of Windows 2000 Professional.C、 After Windows 2000 Professional is installed， logon and make the changes through thecontrol panel.D、 Make the appropriate changes in the date and time settings dialogue box during theinstallation of Windows 2000 Professional.
You are administering a Windows 2000 Professional， single Pentium II 400Mhz processor computer. You need to install a new accounting software application. The software manufacturer recommends that you use a dual-processor configuration. First， you install a second identical processor in your computer. You need to ensure that you will be able to install the new software. What should you do next？（）A、 Update the HAL to support multiple processors.B、 In Device Manager， disable the direct memory access controller.C、 Use the Add/Remove Hardware Wizard to detect and install the driver for the new processor. D、 Reinstall Windows 2000 Professional to support a multi-processor configuration.
You are the network administrator for ExamSheet. You install a 16-bit ISA sound card on your Windows 2000 Professional computer. You have an unsigned device driver from the manufacturer of the sound card on a floppy disk. You install the device driver for the sound card. You restart the computer. During the startup process, the computer stops loading Windows 2000 Professional. You restart the computer and again the computer stops loading Windows 2000 Professional. You start the computer in safe mode. You want your computer to start properly. What should you do next? （）A、Configure driver signing to prevent the installation of unsigned files.B、On Control Panel selectSounds and Multimedia Devicesto remove the sound card drivers.C、Use Device Manager to disable the sound card device.D、UseSigverif.exeto find and delete all unsigned files.
You are the network administrator for your company, which employs 1,500 users. The network consists of a single Active Directory domain. All network servers run Windows Server 2003. Most client computers run Windows XP Professional, and the rest run Windows NT 4.0 Workstation.Two terminal servers are available to network users. You install a new application on both terminal servers.Everyone who uses the new application to create data must save the data directly in a folder on the local hard disk.You need to ensure that client disk drives are always available when employees connect to the terminal servers.Which two actions should you perform? （）(Each correct answer presents part of the solution. Choose two.)A、Create a client connection object with default settings and deploy the object to each terminal server.B、Edit the RDP-Tcp properties by selecting the Connect client drives at logon option.C、Install NetMeeting on all client computers. Configure Remote Desktop Sharing.D、Install the default Windows 2000 Terminal Server Client software on the Windows NT 4.0 workstations.E、Install Remote Desktop Connection on the Windows NT 4.0 workstations.
You are the network administrator for ExamSheet.net. You install Windows 2000 Professional on your portable computer. You use a docking station for your portable computer when you are in the office. You install a ISA-based network adapter in your docking station. You insert your computer into the docking station and start the computer. The network adapter is not detected during the startup process. You obtain a disk that contains the supported driver from the network adapter manufacturer. You want to allow Windows 2000 Professional to use the network adapter. What should you do?（）A、Restart the computer in the docking station.B、Run the Add/Remove Hardware wizard.C、Use Device Manager to scan for hardware changes.D、Copy the network adapter driver to the Winnt/Driver Cache/i386 folder.E、Install the new network adapter driver.
Your computer runs Microsoft Windows XP Professional. You share your computer with two other co-workers. You purchase a new computer. You install Microsoft Windows Vista on the new computer. You need to migrate the following content from the old computer to the new computer： All system and program settings All users settings Only the content in the C:///Appdata folder Which tool should you use？ （）A、File and Settings Transfer wizardB、Application Compatibility toolkitC、Windows Automated Installation toolkitD、Microsoft Windows Easy Transfer wizard
You are the network administrator for ExamSheet. Computers on your network run Windows 2000 Professional, Windows NT Workstation 4.0 and Windows 98. Ten Windows 2000 Professional computers are located in the research department. These computers contain highly confidential information. You want the 10 Windows 2000 Professional computers to be able to communicate only with other Windows 2000 computers. What should you do?（）A、On the research computers use the Local Computer Policy to disable theAccess this computer from the networkoption.B、Use Security Configuration and Analysis to apply the Highly Secure security template to the research computers.C、Add the users of the research computers to the Power Users group on each computer.D、On the research computers configure the security settings to prevent anonymous access.
You install a SCSI adapter and a SCSI tape drive on your Windows 2000 Professional computer. You start the computer. Windows 2000 Professional detects and installs drivers for the new SCSI devices. Later the same day, you restart your computer. During the startup process, the computer stops loading Windows 2000 Professional. You then restart the computer and it stops again. You want to enable your Windows 2000 Professional computer to start successfully. What should you do? （）A、Start the computer in safe mode. Enable driver signing.B、Start the computer in safe mode. Use Device Manager to remove the SCSI tape device.C、Start the computer by using the Recovery Console. Repair the Master Boot Record by using the fixmbr command.D、Start the computer by using the Recovery Console. Disable the SCSI adapter device driver by using the disable command.
Your computer runs Microsoft Windows XP Professional. The computer also runs 20 third-party applications. You plan to upgrade your computer to Microsoft Windows Vista. The functionality of the existing 20 applications must be maintained even after you upgrade your computer. You need to ascertain whether the hardware and software on the Windows XP Professional computer will support the upgrade. What should you do？（）A、Run the mbsacli.exe command.B、Run the winnt32.exe /checkupgradeonly command.C、Run the Microsoft Windows Vista Upgrade Advisor application.D、Compare the Microsoft Windows XP Professional system hardware against the Microsoft Windows Vista Hardware Compatibility List （HCL）.
You have a computer that runs Windows XP Professional. Multiple users share the computer. You log on to the computer by using the local administrator account and install a custom application. You need to add an application shortcut to the desktop of all new users who use the computer. The shortcut must appear on the desktop of new users only. What should you do?（）A、Copy the shortcut to %systemdrive%/documents and settings/default user/desktop/.B、Copy the shortcut to %systemdrive%/documents and settings/all users/desktop/.C、Copy the shortcut to your desktop. Modify the %comspec% system environment variable. D、Copy the shortcut to the guest user’s desktop. Assign the Everyone group Read permission to the guest user profile.
You are the network administrator for ExamSheet.net. You administer ExamSheet's Windows 2000 network. You want to update the device driver for the network adapter in your Windows 2000 Professional computer. You log on the computer by using the local Administrator account. You use Device Manager to verify that the network adapter is installed on your computer. You select the Driver tab and Update Driver option, and install a new driver from the network adapter manufacturer. You restart the computer. After displaying the Windows 2000 Professional startup screen, your computer displays aCkernel stop error message. You want to configure your computer to start successfully. Which two methods can you use to resolve the problem?（）A、Perform an emergency repair of the system from the Windows 2000 Professional CD-ROM by using the Emergency Repair Disk for the computer.B、Restart the computer. In the Recovery Console， use the Extract utility to reinstall the loopback driver from the Windows 2000 Professional CD-ROM.C、Restart the computer by using the last know good configuration.D、Restart the computer in safe mode and reinstall the original network adapter driver. E、Restart the computer and disable Plug and Play in the computer BIOS.
Your Windows 2000 Professional computer is configured to support two monitors. You install a DOS-based application on your computer. The application uses the Windows 2000 Professional default settings Autoexec.nt and Config.nt. Your primary and secondary video adapter are both set to 16-bit color,1024x 768 resolution, and default refresh rates. You create a shortcut for the DOS-based application on the primary monitor’s desktop and use the default PIF settings. Your attempt to run the DOS-based application on the primary monitor. The application opens, but the display area is scrambled. You then attempt to run the DOS-based application on the secondary monitor. The application does not open. Both monitors function correctly when you run Windows-based applications. What should you do?（ ）A、Change the color setting for both video adapters to 256 colors. Reconfigure the shortcut properties to run the DOS-based application in full-screen mode.B、Change the refresh rate setting to optimal for both video adapter. Reconfigure the PIF settings of the DOS-based application to start in a window.C、Change the drivers for the secondary video adapter from WDM-compliant drivers to DOS drivers. Reconfigure the PIF settings to run the DOS-based application in full-screen modeD、Update the drivers for the primary video adapter. Change the secondary video adapter to use 640 x 480 resolution and 256 colors.
单选题You are administering a Windows 2000 Professional， single Pentium II 400Mhz processor computer. You need to install a new accounting software application. The software manufacturer recommends that you use a dual-processor configuration. First， you install a second identical processor in your computer. You need to ensure that you will be able to install the new software. What should you do next？（）A Update the HAL to support multiple processors.B In Device Manager， disable the direct memory access controller.C Use the Add/Remove Hardware Wizard to detect and install the driver for the new processor. D Reinstall Windows 2000 Professional to support a multi-processor configuration.
多选题You are the desktop administrator for ExamSheet. Your Windows 2000 Professional computer is configured to support two monitors. You install a DOS-based application on your computer. The application uses the Windows 2000 Professional default settings Autoexec.nt and Config.nt. Your primary and secondary video adapters are both set to 32 bit color, 800 x 600 resolution, and default refresh rates. You create a shortcut for the DOS-based application on the primary monitor's desktop and use the default PIF settings. You attempt to run the DOS-based application on the primary monitor. The application opens, but the display area is scrambled. You then attempt to run the DOS-based application on the secondary monitor. The application does not open. Both monitors function correctly when you run Windows based applications. You want to be able to run the DOS-based application on either monitor. What should you do?（）AReconfigure the PIF settings of the DOS-based application to start in a window.BReconfigure the shortcut properties to run the DOS-based application in full screen mode.CChange the drivers for both video adapters from WDM compliant drivers to DOS drivers.DChange the refresh rate setting to 72 hertz for both video adapters.EChange the color setting for both video adapters to 256 colors.
多选题You are the network administrator for ExamSheet.net. You install Windows 2000 Professional on your portable computer. You use a docking station for your portable computer when you are in the office. You install a ISA-based network adapter in your docking station. You insert your computer into the docking station and start the computer. The network adapter is not detected during the startup process. You obtain a disk that contains the supported driver from the network adapter manufacturer. You want to allow Windows 2000 Professional to use the network adapter. What should you do?（）ARestart the computer in the docking station.BRun the Add/Remove Hardware wizard.CUse Device Manager to scan for hardware changes.DCopy the network adapter driver to the Winnt/Driver Cache/i386 folder.EInstall the new network adapter driver.
单选题Your computer runs Microsoft Windows XP Professional. You share your computer with two other co-workers. You purchase a new computer. You install Microsoft Windows Vista on the new computer. You need to migrate the following content from the old computer to the new computer： All system and program settings All users settings Only the content in the C:///Appdata folder Which tool should you use？ （）AFile and Settings Transfer wizardBApplication Compatibility toolkitCWindows Automated Installation toolkitDMicrosoft Windows Easy Transfer wizard