PassGuide has a BGP network and a BGP route of 197.22.129.0/24 that should be propagated to all of the devices. The route is currently not in any of the routing tables. The PassGuide administrator determines that an access list is the cause of the problem. The administrator changes the access list to allow this route, but the route still doesnot appear in any of the routing tables. What should be done to propagate this route（）A、Use the service-policy command to adjust the QOS policy to allow the route to propagate.B、Clear the BGP session.C、Use the release BGP routing command.D、Change both the inbound and outbound policy related to this route.E、None of the other alternatives apply
PassGuide has a BGP network and a BGP route of 197.22.129.0/24 that should be propagated to all of the devices. The route is currently not in any of the routing tables. The PassGuide administrator determines that an access list is the cause of the problem. The administrator changes the access list to allow this route, but the route still doesnot appear in any of the routing tables. What should be done to propagate this route（）
- A、Use the service-policy command to adjust the QOS policy to allow the route to propagate.
- B、Clear the BGP session.
- C、Use the release BGP routing command.
- D、Change both the inbound and outbound policy related to this route.
- E、None of the other alternatives apply
相关考题：
When implementing BGP confederations, which configuration command establishes the globally unique AS number used with external peers outside your network?() A. bgp confederation asB. bgp confederation systemC. bgp confederation remote-asD. bgp confederation identifier
The Border Gateway Protocol（BGP）is an interautonomous system（71）protocol.The primary function of a BGP speaking system is to exchange network（72）information with other BGP system.This network reachability information includes information on the list of Autonomous System（ASs）that reachability information traverses.BGP-4 provides a new set of mechanisms for supporting（在此空作答）interdomain routing.These mechanisms include support for dvertising an IP（74）and eliminate the concept of network class within BGP.BGP-4 also introduces mechanisms that allow aggregation of routes,including（75）of AS paths.These changes provide support for the proposed supernetting scheme.A.answerlessB.connectionlessC.confirmlessD.classless
You have a router running BGP for the MPLS network and OSPF for the local LAN network at the sales office. A route is being learned from the MPLS network that also exists on the OSPF local network. It is important that the router chooses the local LAN route being learned from the downstream switch running OSPF rather than the upstream BGP neighbor. Also， if the local OSPF route goes away， the BGP route needs to be used. What should be configured to make sure that the router will choose the LAN network as the preferred path？（）A、static route needs to be addedB、floating static route needs to be addedC、bgp backdoor commandD、ospf backdoor command
A router has two paths to reach another network in a different autonomous system. Neither route was generated by the local router and both routes have the same default weight an d local preference values. Which statement is true about how BGP would select the best path?（）A、To influence one route to be preferred, its default local preference value will be changed via the use of the command bgp default local - preference 50B、Th e router will prefer the shortest autonomous system pathC、If the command bgp always - compare - med has been given, then the router will prefer the route with the highest MEDD、The router will prefer the route with the lower MED
What are the two reasons for the appearance of 0.0.0.0 as the next hop for a network when using the "show ip bgp" c ommand?（）A、The network was originated via redistribution of an interior gateway protocol into BGP.B、The network was defined by a static route.C、The network was learned via IBGP.D、The network was learned via EBGP.E、The network was originated via a network or aggregate command.
BGP路由的半动态注入方式是指（）。A、在BGP协议中通过import命令引入IGP路由B、在BGP协议中通过network命令引入IGP路由C、在BGP协议中通过network命令引入静态路由D、在BGP协议中通过summary automatic聚合形成路由
You are the network consultant from passguide.com. Could you please tell customers what strategy will protect network resources and services from unauthorized actions?（）A、Content storage networkingB、Network optimizationC、Network managementD、Network security
You work as a network engineer for the company， you want to configure two BGP speakers to form an EBGP session across a firewall. On the engineer’s network， the firewall always permits TCP sessions that are initiated from the inside network （the network attached to the inside interface of the firewall）. What prerequisite is there for enabling BGP to run on this network？（）A、EBGP multihop will need to be configured for this to work.B、This should work with normal BGP peering， with no additional configuration on the BGP speakers or the firewall.C、The BGP protocol port must be opened on the firewallD、There is no way to make BGP work across a firewall.
You are the network administrator for passguide.com. Which device will you install in your computer to make wireless connections you and a network?（）A、RepeaterB、Wireless routerC、HubD、Wireless network adapter
A BGP router is configured as shown below： interface ethernet 0 ip address 10.10.10.1 255.255.0.0! int serial 0 ip address 172.16.1.1 255.255.255.252! router bgp 65001 neighbor 192.168.1.1 remote-as 65002 Based on the above configuration， which of the following BGP statements would inject the10.10.0.0/16 prefix into the BGP routing table？（）A、network 10.0.0.0B、network 10.10.0.0 mask 255.255.0.0C、network 10.10.10.1 mask 255.255.255.255D、network 10.10.10.0 mask 255.255.255.0E、network 10.0.0.0 mask 255.255.0.0
Multicast is being deployed in the network， and only ip pim sparse-dense mode has been configured on all interfaces in the network to support a new video streaming application. No other multicast configuration was applied anywhere in the network. Since enabling multicast， the network monitoring tools show periodic spikes in link utilization throughout the network， even in areas where the video application is not being used. What could be a possible cause？（）A、PIM sparse mode is being used.B、PIM dense mode is being used.C、The BGP multicast address family has not been configured.D、IGMP version 3 is being used.E、IP PIM neighbor filters have not been applied.
You are the network consultant from passguide.com. Do you know what attacks are software based attacks that disable your computer and attack user by e-mail? （）A、ExecutableB、TrojanC、VirusD、Worm
Which three statements about BGP confederation and route reflectors are true？ （）A、Clusters are used in confederation schemes to avoid loops.B、BGP network can have a confederation within a route reflector area.C、An internal BGP network cannot have a route reflector within a confederation.D、An internal BGP network can have a route reflector within a confederation.E、Clusters are used in route reflector schemes to avoid loops.F、BGP network cannot have a confederation within a route reflector area.
During BGP configuration on a router that has peered with other BGP speakers, the BGP command aggregate-a ddress 172.32.0.0 255.255.252.0 is issued. However, the peers do not receive this aggregate network in BGP advertisements. Also, the router does not have this aggregate network in its BGP table. Which option indicates a possible reason this command did not cause the router to advertise the aggregate network to its peers?（）A、Interface NULL 0 is likely shutdown.B、The next hop IP address must be a loopback address.C、The BGP command no auto - summary is missing.D、The BGP command no synchronization is missing.E、Subnets of 172.32.0.0/22 do not exist in the BGP table.F、The IGP running on this router does not have network 172.32.0.0/22 installed.
When implementing BGP confederations, which configuration command establishes the globally unique AS number used with external peers outside your network?（）A、bgp confederation asB、bgp confederation systemC、bgp confederation remote-asD、bgp confederation identifier
单选题A company has a BGP network and a BGP route of 196.27.125.0/24 that should be propagated toall of the devices. The route is not now in any of the routing tables. The administrator determinesthat an access list is the cause of the problem. The administrator changes the access list to allowthis route， but the route still does not appear in any of the routing tables. What should be done topropagate this route？（）AClear the BGP sessionBChange both the inbound and outbound policy related to this routeCUse the service-policy command to adjust the QOS policy to allow the route to propagateDUse the release BGP routing command
单选题路由器RTA的E0接口的IP地址为10.110.10.11，子网掩码为255.255.0.0，采用network半动态发布这条直连路由的命令为（）A[RTA-bgp]network 10.110.10.11 mask 255.255.255.0B[RTA-bgp]network 10.110.10.11 mask 255.255.255.255C[RTA-bgp]network 10.110.0.0 mask 255.255.0.0D[RTA-bgp]network 10.110.0.0 mask 0.0.255.255
单选题PassGuide has a BGP network and a BGP route of 197.22.129.0/24 that should be propagated to all of the devices. The route is currently not in any of the routing tables. The PassGuide administrator determines that an access list is the cause of the problem. The administrator changes the access list to allow this route, but the route still doesnot appear in any of the routing tables. What should be done to propagate this route（）AUse the service-policy command to adjust the QOS policy to allow the route to propagate.BClear the BGP session.CUse the release BGP routing command.DChange both the inbound and outbound policy related to this route.ENone of the other alternatives apply
单选题You are the network consultant from passguide.com. Could you please tell customers what strategy will protect network resources and services from unauthorized actions?（）ANetwork managementBNetwork optimizationCNetwork securityDContent storage networking
单选题You have a router running BGP for the MPLS network and OSPF for the local LAN network at the sales office. A route is being learned from the MPLS network that also exists on the OSPF local network.It is important that the router chooses the local LAN route being learned from the downstream switch running OSPF rather than the upstream BGP neighbor. Also，if the local OSPF route goes away，the BGP route needs to be used. What should be configured to make sure that the router will choose the LAN network as the preferred path？（）Astatic route needs to be addedBfloating static route needs to be addedCbgp backdoor commandDospf backdoor command
单选题A router has two paths to reach another network in a different autonomous system. Neither route was generated by the local router and both routes have the same default weight an d local preference values. Which statement is true about how BGP would select the best path?（）ATo influence one route to be preferred, its default local preference value will be changed via the use of the command bgp default local - preference 50BTh e router will prefer the shortest autonomous system pathCIf the command bgp always - compare - med has been given, then the router will prefer the route with the highest MEDDThe router will prefer the route with the lower MED
多选题Which three statements about BGP confederation and route reflectors are true？ （）AClusters are used in confederation schemes to avoid loops.BBGP network can have a confederation within a route reflector area.CAn internal BGP network cannot have a route reflector within a confederation.DAn internal BGP network can have a route reflector within a confederation.EClusters are used in route reflector schemes to avoid loops.FBGP network cannot have a confederation within a route reflector area.
多选题What are the two reasons for the appearance of 0.0.0.0 as the next hop for a network when using the "show ip bgp" c ommand?（）AThe network was originated via redistribution of an interior gateway protocol into BGP.BThe network was defined by a static route.CThe network was learned via IBGP.DThe network was learned via EBGP.EThe network was originated via a network or aggregate command.
单选题A problem was reported that the 10.10.10.0/24 prefix was not injected into the local BGP table on a PassGuide router named PG1.The following information is available from this router：PG1 Configuration：router bgp 65001network 10.0.0.0neighbor 172.16.1.1 remote-as65002no auto-summaryRouting table information：show ip route|include 10O10.10.10.0/24[110/11]via192.168.1.1，2d00h，Ethernet0/0Why is this prefix not in the local BGP table of thePG1（）AThe 172.16.1.1 neighbor is down.BThe prefix 10.10.10.0/24is not a’connected’route.CThis route is not a BGP learned route.DThe network command is wrong.ENone of the other alternatives apply