单选题A company has a BGP network and a BGP route of 196.27.125.0/24 that should be propagated toall of the devices. The route is not now in any of the routing tables. The administrator determinesthat an access list is the cause of the problem. The administrator changes the access list to allowthis route， but the route still does not appear in any of the routing tables. What should be done topropagate this route？（）AClear the BGP sessionBChange both the inbound and outbound policy related to this routeCUse the service-policy command to adjust the QOS policy to allow the route to propagateDUse the release BGP routing command
单选题
A company has a BGP network and a BGP route of 196.27.125.0/24 that should be propagated toall of the devices. The route is not now in any of the routing tables. The administrator determinesthat an access list is the cause of the problem. The administrator changes the access list to allowthis route， but the route still does not appear in any of the routing tables. What should be done topropagate this route？（）
A
Clear the BGP session
B
Change both the inbound and outbound policy related to this route
C
Use the service-policy command to adjust the QOS policy to allow the route to propagate
D
Use the release BGP routing command
参考解析
解析：
暂无解析
相关考题：
Which JUNOS software show command allows you to view BGP attributes for a given route?() A. show route bgpB. show route extensiveC. show bgp attributeD. show bgp neighbor
Which action occurs when the static route 10.0.55.2／32 is evaluated by the policy main－policy? () A. The route is advertised into BGP.B. The route is suppressed from BGP.C. The route is advertised into BGP and goes only one hop.D. The route is advertised into BGP and can only propagate throughout the neighboring AS.
In BGP routing，what does the rule of synchronization mean？（）A、A BGP router can only advertise an EBGP learned route，provided that the route is an IGP route in the routing table.B、A BGP router can only advertise an IBGP learned route，provided that the route is an IGP route in the routing table.C、A BGP router can only advertise an IBGP learned route，provided that the route is an IGP route that is not in the routing table.D、A BGP router can only advertise an EBGP learned route，provided that the route is a metric of 0 in the BGP table.
You issue the command show process memory ∣ include BGP and notice that BGP is consuming alarge percentage of the router’s memory. Which of the following steps would result in lowering theamount of memory being consumed by BGP？（Choose all that apply.）（）A、Filter unneeded BGP routesB、Run BGP on a different platform that already has more memoryC、Upgrade the router memoryD、Increase the BGP update timerE、Compress the BGP tableF、Use a default route instead of maintaining a full BGP table
You have a router running BGP for the MPLS network and OSPF for the local LAN network at the sales office. A route is being learned from the MPLS network that also exists on the OSPF local network. It is important that the router chooses the local LAN route being learned from the downstream switch running OSPF rather than the upstream BGP neighbor. Also， if the local OSPF route goes away， the BGP route needs to be used. What should be configured to make sure that the router will choose the LAN network as the preferred path？（）A、static route needs to be addedB、floating static route needs to be addedC、bgp backdoor commandD、ospf backdoor command
A router has two paths to reach another network in a different autonomous system. Neither route was generated by the local router and both routes have the same default weight an d local preference values. Which statement is true about how BGP would select the best path?（）A、To influence one route to be preferred, its default local preference value will be changed via the use of the command bgp default local - preference 50B、Th e router will prefer the shortest autonomous system pathC、If the command bgp always - compare - med has been given, then the router will prefer the route with the highest MEDD、The router will prefer the route with the lower MED
What are the two reasons for the appearance of 0.0.0.0 as the next hop for a network when using the "show ip bgp" c ommand?（）A、The network was originated via redistribution of an interior gateway protocol into BGP.B、The network was defined by a static route.C、The network was learned via IBGP.D、The network was learned via EBGP.E、The network was originated via a network or aggregate command.
哪个命令使你能看到import policy应用在BGP相邻体的效果（）A、show route protocol bgpB、show route protocol bgp next-hop address C、show route protocol bgp export-policy D、show route advertising-protocol bgp neighbor-address
You work as a network engineer for the company， you want to configure two BGP speakers to form an EBGP session across a firewall. On the engineer’s network， the firewall always permits TCP sessions that are initiated from the inside network （the network attached to the inside interface of the firewall）. What prerequisite is there for enabling BGP to run on this network？（）A、EBGP multihop will need to be configured for this to work.B、This should work with normal BGP peering， with no additional configuration on the BGP speakers or the firewall.C、The BGP protocol port must be opened on the firewallD、There is no way to make BGP work across a firewall.
An ISP is running a large IBPG network with 25 routers. The full mesh topology that is currently inplace is inefficiently using up bandwidth from all of the BGP traffic. What can the administratorconfigure to reduce the number of BGP neighbor relationships within the AS？（）A、Route reflectorsB、Route mapsC、Route redistributionD、Peer groupsE、Aggregate addresses
PassGuide has a BGP network and a BGP route of 197.22.129.0/24 that should be propagated to all of the devices. The route is currently not in any of the routing tables. The PassGuide administrator determines that an access list is the cause of the problem. The administrator changes the access list to allow this route, but the route still doesnot appear in any of the routing tables. What should be done to propagate this route（）A、Use the service-policy command to adjust the QOS policy to allow the route to propagate.B、Clear the BGP session.C、Use the release BGP routing command.D、Change both the inbound and outbound policy related to this route.E、None of the other alternatives apply
What is the BGP synchronization rule？（）A、Routing information received through an IBGP session is not forwarded to another IBGP neighbor， onlyto EBGP neighborsB、Routing information received through an EBGP session is not forwarded to another EBGP neighbor，only to IBGP neighborsC、BGP neighbor peerings are established and sychronized using the TCP 3-way handshakeD、BGP shall not advertise a route until that route has been learned via an IGP also
Which three statements about BGP confederation and route reflectors are true？ （）A、Clusters are used in confederation schemes to avoid loops.B、BGP network can have a confederation within a route reflector area.C、An internal BGP network cannot have a route reflector within a confederation.D、An internal BGP network can have a route reflector within a confederation.E、Clusters are used in route reflector schemes to avoid loops.F、BGP network cannot have a confederation within a route reflector area.
During BGP configuration on a router that has peered with other BGP speakers, the BGP command aggregate-a ddress 172.32.0.0 255.255.252.0 is issued. However, the peers do not receive this aggregate network in BGP advertisements. Also, the router does not have this aggregate network in its BGP table. Which option indicates a possible reason this command did not cause the router to advertise the aggregate network to its peers?（）A、Interface NULL 0 is likely shutdown.B、The next hop IP address must be a loopback address.C、The BGP command no auto - summary is missing.D、The BGP command no synchronization is missing.E、Subnets of 172.32.0.0/22 do not exist in the BGP table.F、The IGP running on this router does not have network 172.32.0.0/22 installed.
A problem was reported that the 10.10.10.0/24 prefix was not injected into the local BGP table ona Company router named R1. The following information is available from this router： R1 Configuration： router bgp 65001 network 10.0.0.0 neighbor 172.16.1.1 remote-as 65002 no auto-summary Routing table information： show ip route | include 10 O 10.10.10.0/24 [110/11] via 192.168.1.1， 2d00h， Ethernet0/0 Why is this prefix not in the local BGP table of the R1？（）A、The 172.16.1.1 neighbor is down.B、The prefix 10.10.10.0/24 is not a ’connected’ routeC、This route is not a BGP learned routeD、The network command is wrongE、None of the other alternatives apply
Which JUNOS software show command allows you to view BGP attributes for a given route？（）A、show route bgpB、show bgp attributeC、show bgp neighborD、show route extensiveE、show bgp statistics
What is the first step in BGP route selection?（）A、The local router prefers the route with the shortest AS Path.B、The local router verifies that it has a route to the BGP Next Hop IP address.C、The local router prefers the route from the peer with the lowest peer ID address.D、The local router prefers the route learned from an EBGP peer over a route learned from an IBGP peer.
单选题In BGP routing，what does the rule of synchronization mean？（）AA BGP router can only advertise an EBGP learned route，provided that the route is an IGP route in the routing table.BA BGP router can only advertise an IBGP learned route，provided that the route is an IGP route in the routing table.CA BGP router can only advertise an IBGP learned route，provided that the route is an IGP route that is not in the routing table.DA BGP router can only advertise an EBGP learned route，provided that the route is a metric of 0 in the BGP table.
单选题PassGuide has a BGP network and a BGP route of 197.22.129.0/24 that should be propagated to all of the devices. The route is currently not in any of the routing tables. The PassGuide administrator determines that an access list is the cause of the problem. The administrator changes the access list to allow this route, but the route still doesnot appear in any of the routing tables. What should be done to propagate this route（）AUse the service-policy command to adjust the QOS policy to allow the route to propagate.BClear the BGP session.CUse the release BGP routing command.DChange both the inbound and outbound policy related to this route.ENone of the other alternatives apply
单选题You have a router running BGP for the MPLS network and OSPF for the local LAN network at the sales office. A route is being learned from the MPLS network that also exists on the OSPF local network.It is important that the router chooses the local LAN route being learned from the downstream switch running OSPF rather than the upstream BGP neighbor. Also，if the local OSPF route goes away，the BGP route needs to be used. What should be configured to make sure that the router will choose the LAN network as the preferred path？（）Astatic route needs to be addedBfloating static route needs to be addedCbgp backdoor commandDospf backdoor command
单选题A router has two paths to reach another network in a different autonomous system. Neither route was generated by the local router and both routes have the same default weight an d local preference values. Which statement is true about how BGP would select the best path?（）ATo influence one route to be preferred, its default local preference value will be changed via the use of the command bgp default local - preference 50BTh e router will prefer the shortest autonomous system pathCIf the command bgp always - compare - med has been given, then the router will prefer the route with the highest MEDDThe router will prefer the route with the lower MED
单选题Given the following policy: Which action occurs when the static route 192.168.0.0/25 is evaluated by the policy main-policy?（）A The route is not advertised into BGP.A.The route is not advertised into BGP.B The route is advertised into BGP with metric 10.B.The route is advertised into BGP with metric 10.C The route is advertised into BGP with metric 20.C.The route is advertised into BGP with metric 20.D The route is advertised into BGP with default metric.D.The route is advertised into BGP with default metric.
多选题Which three statements about BGP confederation and route reflectors are true？ （）AClusters are used in confederation schemes to avoid loops.BBGP network can have a confederation within a route reflector area.CAn internal BGP network cannot have a route reflector within a confederation.DAn internal BGP network can have a route reflector within a confederation.EClusters are used in route reflector schemes to avoid loops.FBGP network cannot have a confederation within a route reflector area.
单选题A problem was reported that the 10.10.10.0/24 prefix was not injected into the local BGP table on a PassGuide router named PG1.The following information is available from this router：PG1 Configuration：router bgp 65001network 10.0.0.0neighbor 172.16.1.1 remote-as65002no auto-summaryRouting table information：show ip route|include 10O10.10.10.0/24[110/11]via192.168.1.1，2d00h，Ethernet0/0Why is this prefix not in the local BGP table of thePG1（）AThe 172.16.1.1 neighbor is down.BThe prefix 10.10.10.0/24is not a’connected’route.CThis route is not a BGP learned route.DThe network command is wrong.ENone of the other alternatives apply
单选题A problem was reported that the 10.10.10.0/24 prefix was not injected into the local BGP table ona Company router named R1. The following information is available from this router： R1 Configuration： router bgp 65001 network 10.0.0.0 neighbor 172.16.1.1 remote-as 65002 no auto-summary Routing table information： show ip route | include 10 O 10.10.10.0/24 [110/11] via 192.168.1.1， 2d00h， Ethernet0/0 Why is this prefix not in the local BGP table of the R1？（）AThe 172.16.1.1 neighbor is down.BThe prefix 10.10.10.0/24 is not a ’connected’ routeCThis route is not a BGP learned routeDThe network command is wrongENone of the other alternatives apply
单选题Which JUNOS software show command allows you to view BGP attributes for a given route?（）Ashow route bgpBshow route extensiveCshow bgp attributeDshow bgp neighbor
单选题Which JUNOS software show command allows you to view BGP attributes for a given route？（）Ashow route bgpBshow bgp attributeCshow bgp neighborDshow route extensiveEshow bgp statistics