Which two settings must be configured in order to use the GUI to configure Call Admission Controlwith voice applications？ （）A、 QoS must be set to PlatinumB、 WMM must be enabledC、 QoS must be set to GoldD、 TSPEC must be disabledE、 Cisco Compatible Extensions must be disabled
Which two settings must be configured in order to use the GUI to configure Call Admission Controlwith voice applications？ （）
- A、 QoS must be set to Platinum
- B、 WMM must be enabled
- C、 QoS must be set to Gold
- D、 TSPEC must be disabled
- E、 Cisco Compatible Extensions must be disabled
相关考题：
A new switch is being installed in the Ezonexam network and you have been assigned the task of connecting it to an existing switch. In doing this, you want to set up the VLAN Trunking Protocol so that VLAN information can be passed between the switches. Which of the following must you do to accomplish this? (Choose all that apply).A．You must set each end of the trunk line to IEEE 802.1e encapsulation.B．You must set the same VTP management domain name on both switches.C．You must set all ports on the two switches as access ports.D．You must configure one of the switches as a VTP server.E．You must use a rollover cable to connect the two switches.
A new switch is installed in the Testking network. This switch is to be configured sothat VLAN information will be automatically distributed to all the other Cisco Catalyst switches in the network.Which of the conditions below have to be met in order for this to occur?（）A. The switch that will share the VLAN information must be in the VTP Server mode.B. The switches must be in the same VTP domain.C. The switch that will share the VLAN information must be configured as the root bridge.D. The switches must be configured to use the same VTP version.E. The switches must be configured to use the same STP version.F. The switches must be configured to use the same type of ID tagging.G. The switches must be connected over VLAN trunks.
A new switch is being installed and you have been assigned the task of connecting it to an existing switch. In doing this, you want to set up the VLAN Trunking Protocol so that VLAN information can be passed between the switches.Which of the following must you do to accomplish this?（）A. You must set each end of the trunk line to IEEE 802.1e encapsulation.B. You must set the same VTP management domain name on both switches.C. You must set all ports on the two switches as access ports.D. You must configure one of the switches as a VTP server.E. You must use a rollover cable to connect the two switches.
Which two settings must be configured in order to use the GUI to configure Call Admission Control with voice applications?() A. QoS must be set to PlatinumB. WMM must be enabledC. QoS must be set to GoldD. TSPEC must be disabledE. Cisco Compatible Extensions must be disabled
To configure the VLAN trunking protocol to communicate VLAN information between two switches, what two requirements must be met?() A. Each end of the trunk line must be set to IEEE 802.1E encapsulation.B. The VTP management domain name of both switches must be set the same.C. All ports on both the switches must be set as access ports.D. One of the two switches must be configured as a VTP server.E. A rollover cable is required to connect the two switches together.F. A router must be used to forward VTP traffic between VLANs.
In order to allow the establishment of a Telnet session with a router, which set of commands must be configured()。 A.AB.BC.CD.DE.EF.F
Which two Cisco AutoQoS configuration statements are true？ （）A、the auto discovery qos command is supported on serial interfaces， subinterfaces， and virtual interfacesB、CEF must be enabled before configuring the auto discovery qos commandC、the auto discovery qos privilege EXEC command must be configured on a router for several days to collect a sampling of data trafficD、the auto qos trust command relies on NBAR to provide VoIP classificationE、the auto qos voip command configures the voip classification on routers and switches
What must be true about the client before upstream traffic stream metrics can be displayed on the Cisco WLC?（）A、must be Cisco Compatible Extensions version 2B、must be Cisco Compatible Extensions version 3C、must be Cisco Compatible Extensions version 4D、must be associated to a Platinum QoS WLANE、must be associated to an access point on a Cisco WLC with code version 5.0 or newer
Which of the following is not an essential prerequisite for AutoQoS to be correctly applied to an interface（）A、The interface must be configured as a Multilink PPP interface.B、The correct bandwidth should be configured on the interface.C、A QoS policy must not be currently attached to the interface.D、CEF must be enableE、AutoQoS must be enabled globally before it can be enabled on the interface.F、An IP address must be configured on the interface if its speed is equal to or less than 768 kbps.
Which of the following is not an essential prerequisite for AutoQoS to be correctly applied to aninterface？ （Choose all that apply.）（）A、The interface must be configured as a Multilink PPP interfaceB、The correct bandwidth should be configured on the interfaceC、A QoS policy must not be currently attached to the interfaceD、CEF must be enabledE、AutoQoS must be enabled globally before it can be enabled on the interfaceF、An IP address must be configured on the interface if its speed is equal to or less than 768 kbps
The Cisco AutoQoS feature is being used throughout the Company VOIP network. Which three statements about this feature are true？（）A、The "mls qos" global configuration command must be entered before configuring AutoQoS.B、CEF must be enabled.C、The "no auto qos voip" command is used to disable Cisco AutoQos and revoke all configurations generated by Cisco AutoQos.D、CDP must be enabled.E、SNMP must be enabled.
Which two settings must be configured in order to use the GUI to configure Call Admission Control with voice applications?（）A、QoS must be set to PlatinumB、WMM must be enabledC、QoS must be set to GoldD、TSPEC must be disabledE、Cisco Compatible Extensions must be disabled
Which two statements correctly describe a Cisco WLC configuration of Wireless QoS Profiles Wired_QoS_Profiles for an implementation of DSCP or CoS deployment?（）A、It must always be set on all QoS profile types because this sets the type of markings as either CoS or DSCP.B、It is optional if the Cisco WLC attached switch operates on a trust DSCP model.C、It must be set if the Cisco WLC attached switch operates on a trust CoS model.D、It sets the EDCF queue used for the radio-transmitted frames.
The Cisco CRS Server must be configured to communicate and interoperate with the Cisco CallManager. Which two must be configured on the Cisco CRS Server?（）A、Application Management to load applications B、JTAPI Subsystem with the JTAPI Call Control Group C、Database Subsystem communication with LDAP Directory D、JTAPI Subsystem with the JTAPI provider
When installing processors with mixed stepping levels in a server， which of the following guidelines must be followed？ （）A、 The processors must have different frequencies set to operate.B、 The processor with the highest feature set must be the bootstrap processor.C、 The processors must have different cache sizes set to operate.D、 The processors must have the same cache size set.E、 The processor with the lowest feature set must be the bootstrap processor.
What is required for proper implementation of jumbo frame support on a Cisco Nexus 2000 Series Fabric Extender？（） A、 The interface configured as FEX fabric requires the MTU to be set to jumbo.B、 The service policy must be applied to the system QoS.C、 The device defaults to jumbo frame support； no changes are required.D、 The switchport in the FEX interface must be set to MTU 9216.
In order to configure two routers as anycast RPs， which of these requirements， af a minimum， must besatisfied？（）A、Multicast Source Discovery Protocol mesh-groups must be configured between the two anycast RPs.B、The RPs must be within the same IGP domain.C、Multicast Source Discovery Protocol must be configured between the two anycast RPs.D、The two anycast RPs must be IBGP peers.
In order to configure two routers as anycast RPs，which of these requirements，at a minimum， must be satisfied？（）A、Multicast Source Discovery Protocol mesh-groups must be configured between the two anycast RPs.B、The RPs must be within the same IGP domain.C、Multicast Source Discovery Protocol must be configured between the two anycast RPs.D、The two anycast RPs must be IBGP peers.
多选题Which two settings must be configured in order to use the GUI to configure Call Admission Control with voice applications?（）AQoS must be set to PlatinumBWMM must be enabledCQoS must be set to GoldDTSPEC must be disabledECisco Compatible Extensions must be disabled
多选题Which two Cisco AutoQoS configuration statements are true？ （）Athe auto discovery qos command is supported on serial interfaces， subinterfaces， and virtual interfacesBCEF must be enabled before configuring the auto discovery qos commandCthe auto discovery qos privilege EXEC command must be configured on a router for several days to collect a sampling of data trafficDthe auto qos trust command relies on NBAR to provide VoIP classificationEthe auto qos voip command configures the voip classification on routers and switches
单选题In order to configure two routers as anycast RPs， which of these requirements， af a minimum， must besatisfied？（）AMulticast Source Discovery Protocol mesh-groups must be configured between the two anycast RPs.BThe RPs must be within the same IGP domain.CMulticast Source Discovery Protocol must be configured between the two anycast RPs.DThe two anycast RPs must be IBGP peers.
多选题Which two settings must be configured in order to use the GUI to configure Call Admission Controlwith voice applications？ （）AQoS must be set to PlatinumBWMM must be enabledCQoS must be set to GoldDTSPEC must be disabledECisco Compatible Extensions must be disabled
多选题To configure the VLAN trunking protocol to communicate VLAN information between two switches, what two requirements must be met?（）AEach end of the trunk line must be set to IEEE 802.1E encapsulation.BThe VTP management domain name of both switches must be set the same.CAll ports on both the switches must be set as access port.DOne of the two switches must be configured as a VTP server.EA rollover cable is required to connect the two switches together.FA router must be used to forward VTP traffic between VLANs.
多选题Which of the following is not an essential prerequisite for AutoQoS to be correctly applied to aninterface？ （Choose all that apply.）（）AThe interface must be configured as a Multilink PPP interfaceBThe correct bandwidth should be configured on the interfaceCA QoS policy must not be currently attached to the interfaceDCEF must be enabledEAutoQoS must be enabled globally before it can be enabled on the interfaceFAn IP address must be configured on the interface if its speed is equal to or less than 768 kbps
单选题What is required for proper implementation of jumbo frame support on a Cisco Nexus 2000 Series Fabric Extender？（）A The interface configured as FEX fabric requires the MTU to be set to jumbo.B The service policy must be applied to the system QoS.C The device defaults to jumbo frame support； no changes are required.D The switchport in the FEX interface must be set to MTU 9216.
多选题The Cisco CRS Server must be configured to communicate and interoperate with the Cisco CallManager. Which two must be configured on the Cisco CRS Server?（）AApplication Management to load applicationsBJTAPI Subsystem with the JTAPI Call Control GroupCDatabase Subsystem communication with LDAP DirectoryDJTAPI Subsystem with the JTAPI provider
多选题Which two statements correctly describe a Cisco WLC configuration of Wireless QoS Profiles Wired_QoS_Profiles for an implementation of DSCP or CoS deployment?（）AIt must always be set on all QoS profile types because this sets the type of markings as either CoS or DSCP.BIt is optional if the Cisco WLC attached switch operates on a trust DSCP model.CIt must be set if the Cisco WLC attached switch operates on a trust CoS model.DIt sets the EDCF queue used for the radio-transmitted frames.