An administrator is required to maintain space for 750GB of user data. Which of the following is the BEST option available to the administrator？（）A、Create a RAID 5 array using five 200GB disks.B、Create a JBOD using four 200GB disks.C、Create a RAID 1 array using six 200GB disks.D、Create a RAID 5 array using three 200GB disks.
An administrator is required to maintain space for 750GB of user data. Which of the following is the BEST option available to the administrator？（）
- A、Create a RAID 5 array using five 200GB disks.
- B、Create a JBOD using four 200GB disks.
- C、Create a RAID 1 array using six 200GB disks.
- D、Create a RAID 5 array using three 200GB disks.
相关考题：
You are the network administrator for Ezonexam. You are installing Windows 2000 Server on a new computer by using the Windows 2000 Server compact disk. The computer has five 18-GB hard disks Dick0, Disk1, Disk2, Disk3, and Disk4. The disks do not have any partitions defined.You want to use as much space on Disk0 as possible for the partition on which Windows 2000 Server is installed. You want the disk on which you install Windows 2000 Server to be fault tolerant. You also want as much disk space as possible across the other disks to be available for data storage and to be fault tolerant.What should you do? (Each correct answer presents part of the solution. Choose three)A. Install Windows 2000 Server on a 4-GB NTFS partition on Disk 0. Configure the five disks as dynamic disks.B. Install Windows 2000 Server on a 18-GB NTFS partition on Disk 0. Configure the five disks as dynamic disks.C. Create a RAID-5 volume using Disk2, Disk3, and Disk4.D. Create a stripped volume using Disk2, Disk3, and Disk4.E. Create a RAID-5 volume using all disks.F. Create a stripped volume using all disks.G. Select the volume on Disk0 and add a mirror using Disk1.
An administrator needs to maintain 1TB of storage space for a server. A performance critical application will use this storage space for a database. The database will be replicated between multiple servers. Cost and performance are the most important considerations.Which of the following RAID configurations would be the BEST choice for the storage array?（）A. RAID 6 with six 250GB hard drivesB. RAID 5 with five 250GB hard drivesC. RAID 0 with four 250GB hard drivesD. RAID 10 with eight 250GB hard drives
A system administrator needs to maintain 1.2TB of storage for a database server. There are six 250GB drives available in the server for storage space. Which of the following RAID configurations would be the BEST choice given that performance and fault tolerance are important factors?（）A. RAID 1 across drive pairs totaling 3 pairsB. RAID 5 across all 6 drivesC. RAID 10 across all 6 drivesD. RAID 0 across all 6 drives
A server consists of two 72GB SCSI drives and four 146GB SCSI drives. All drives are attached to a RAID controller. The system administrator has decided to configure all six drives in a RAID 5 array.How much usable disk space will this array have?（）A.288GBB.360GBC.432GBD.728GB
An administrator buys a new server. The server has four disks and needs to be configured formaximum space. Fault tolerance is not a constraint. Which of the following configurations completes this task？（）A、RAID 0B、RAID 1C、RAID 5D、RAID 10
A server consists of two 72GB SCSI drives and four 146GB SCSI drives. All drives are attached to a RAID controller. The system’s administrator has decided to mirror two drives for the operating system. Which of the following is the maximum space the administrator will have remaining to use for data when using RAID 0？（）A、292GBB、438GBC、584GBD、728GB
Which of the following RAID arrays should be used to achieve a fault tolerant array with at least 1TB of storage space？ （）A、 Five 250GB drives in RAID 0B、 Six 250GB drives in RAID 5C、 Three 250GB drives in RAID 10D、 Six 250GB drives in RAID 1
An administrator is required to maintain maximum redundancy for 1TB of accounting files. Which of the following is the BEST option available to the administrator？（）A、Create a RAID 5 array using eight 300GB disks.B、Create a RAID 10 array using six 300GB disks.C、Create a RAID 5 array using ten 300GB disks.D、Create a RAID 10 array using eight 300GB disks.
A system administrator needs to provision storage for a 200GB database. The database must have extremely low seek time. Which of the following is the BEST solution？（）A、A JBODB、A RAID 50 arrayC、A NASD、A single SSD
A server contains a 3 disk RAID 5 array. The red LED is illuminated on one of the drives. Which of the following should the server administrator perform？（）A、Replace the driveB、Restore the drive from backupC、Reboot the serverD、Reconfigure RAID 5 to RAID 10
An administrator needs to maintain 1TB of storage space for a server. A performance critical application will use this storage space for a database. The database will be replicated between multiple servers. Cost and performance are the most important considerations. Which of the following RAID configurations would be the BEST choice for the storage array?（）A、RAID 6 with six 250GB hard drivesB、RAID 5 with five 250GB hard drivesC、RAID 0 with four 250GB hard drivesD、RAID 10 with eight 250GB hard drives
A system administrator needs to maintain 1.2TB of storage for a database server. There are six 250GB drives available in the server for storage space. Which of the following RAID configurations would be the BEST choice given that performance and fault tolerance are important factors?（）A、RAID 1 across drive pairs totaling 3 pairsB、RAID 5 across all 6 drivesC、RAID 10 across all 6 drivesD、RAID 0 across all 6 drives
Which of the following can help prevent data loss on a RAID array in the event of a power failure？（）A、Using a RAID mirrorB、A battery backed write cacheC、Using RAID with parityD、A battery backed read cache
An administrator needs to maintain 1TB of storage for mission critical application data.Faulttolerance and performance are the most important considerations.Cost is not a factor at all. Which of the following RAID configurations would be the BEST choice to meet the criteria for the storage array？（）A、RAID 6 with six 250GB hard drivesB、RAID 10 with eight 250GB hard drivesC、RAID 5 with five 250GB hard drivesD、RAID 0 with eight 250GB hard drives
An administrator has been instructed to add four additional drives to a server configured with RAID5. The server is using 146GB drives for the data. Without changing the configuration， how much additional data space would be available if the administrator purchased 300GB drives and added them to the existing array？（）A、438GBB、584GBC、900GBD、1200GB
An administrator is installing Windows Server 2003 via CD on a new server with an SAS RAID array.When the administrator reaches the option to select the target installation drive， there are no drives listed. Which of the following is the FIRST thing the administrator should do？（）A、 Restart the installation via WDS.B、 Shut down the server and check that all RAID drives are connected properly.C、 Restart the installation from CD and press F6 to install RAID drivers.D、 Go into the BIOS and set all RAID drives to compatibility mode.
An administrator has replaced a faulty drive in a server using software RAID. The drive needs to now be partitioned before being added back to the array. Which of the following tools should the administrator use to accomplish this？（）A、chkdskB、mountC、fsckD、diskpart
A customer has an xSeries x445 server attached to a DS4500 storage server containing two EXP710 disk expansion drawers with 14 disks in each. The x445 is to be used for a video streaming application. The customer wants to make the most cost-effective use of the disk capacity while retaining fault tolerance. Which of the following solutions will satisfy the requirements？（）A、Create two RAID-10e arrays， one per disk expansion drawerB、Create a single RAID-10 array across the two disk expansion drawersC、Create a single RAID-5 array across both disk drawers utilizing all disksD、Create four RAID-5 arrays in 6+P format with two arrays to each disk expansion drawer
You are the network administrator for You administare a Windows Server 2003 computer named TestKing12. TestKing12 has a single disk. The disk is configured so that it has four primary partitions, which are formatted as FAT32. The disk also has unallocated space available. You need to use the unallocated disk space to store user data. What should you use?（）A、Convert all existing partitions to NTFS.B、Using Diskpart.exe, run the create command.C、Convert the disk to a dynamic disk, and create a new volume.D、Using Diskpart.exe, run the extend command.
You are the network administrator for TestKing. All network servers run Windows Server 2003. You administer a server named TestKing76. You need to configure TestKing76 to function as a streaming media server for TestKing.com's content team. The content team wants TestKing76 to provide the fastest performance and the most available space possible. Redundancy is not import. TestKing76 currently has three identical, unpartitioned hard disks available. You need to configure the disks to meet the content team's requirements. What should you do?（）A、Create a simple volume on disk and then expand it to the other two disks.B、Create a mirrored volume that uses two of the disks.C、Create a RAID-5 volume that uses all three disks.D、Create a striped volume that uses all three disks.
You are the network administrator for . Your network includes a computer named TestKingSrv1, which runs Windows Server 2003 and Windows XPProfessional in a dual boot configuration. TestKingSrv1 has two basic disks, which are configured as shown in the following table. You need to create a 10 GB partition on Server 1 to store user data. TestKingSrv1 must retain its dual boot functionality. What should you do?（）A、Convert both disks to dynamic disks. Create a 10 GB extended volume by using the unused space on Disk 1 and Disk 2.B、Back up Partition 2 on Disk2. Remove Partition 2 from Disk 2 and restore it on Disk 1 by using the unused space on Disk 1. Create a 10 GB partition on Disk 2C、Back up partition 2 on Disk 1. Remove Partition 2 from Disk 1 and restore it on Disk 2 by using the unused space on Disk 2. Create a 10 GB partition on Disk 1.D、Convert both disks to dynamic disks. Back up Volume 2 on Disk 2. Remove Volume 2 from Disk 2 and restore it on Disk 1 by using the unused space on Disk 1. Create a 10 GB volume on Disk 2.
单选题An administrator needs to maintain 1TB of storage space for a server. A performance critical application will use this storage space for a database. The database will be replicated between multiple servers. Cost and performance are the most important considerations. Which of the following RAID configurations would be the BEST choice for the storage array?（）ARAID 6 with six 250GB hard drivesBRAID 5 with five 250GB hard drivesCRAID 0 with four 250GB hard drivesDRAID 10 with eight 250GB hard drives
单选题Which of the following RAID arrays should be used to achieve a fault tolerant array with at least 1TB of storage space？ （）A Five 250GB drives in RAID 0B Six 250GB drives in RAID 5C Three 250GB drives in RAID 10D Six 250GB drives in RAID 1
单选题A system administrator needs to provision storage for a 200GB database. The database must have extremely low seek time. Which of the following is the BEST solution？（）AA JBODBA RAID 50 arrayCA NASDA single SSD
单选题An administrator is required to maintain space for 750GB of user data. Which of the following is the BEST option available to the administrator？（）ACreate a RAID 5 array using five 200GB disks.BCreate a JBOD using four 200GB disks.CCreate a RAID 1 array using six 200GB disks.DCreate a RAID 5 array using three 200GB disks.
单选题An administrator is required to maintain maximum redundancy for 1TB of accounting files. Which of the following is the BEST option available to the administrator？（）ACreate a RAID 5 array using eight 300GB disks.BCreate a RAID 10 array using six 300GB disks.CCreate a RAID 5 array using ten 300GB disks.DCreate a RAID 10 array using eight 300GB disks.
单选题An administrator needs to maintain 1TB of storage for mission critical application data.Faulttolerance and performance are the most important considerations.Cost is not a factor at all. Which of the following RAID configurations would be the BEST choice to meet the criteria for the storage array？（）ARAID 6 with six 250GB hard drivesBRAID 10 with eight 250GB hard drivesCRAID 5 with five 250GB hard drivesDRAID 0 with eight 250GB hard drives