On a network switch, which of the following is the default native VLAN?（）A、0B、1C、1024D、4096
On a network switch, which of the following is the default native VLAN?（）
- A、0
- B、1
- C、1024
- D、4096
相关考题：
Which three statements are true about the operation of a full-duplex Ethernet network, which is being used in the Ezonexam LAN? (Choose three)A．Ethernet hub ports are preconfigured for full-duplex mode.B．The host network card and the switch port must be capable of operating in full-duplex mode.C．There are no collisions in full-duplex mode.D．In a full-duplex environment, the host network card must check for the availability of the network media before transmitting.E．A dedicated switch port is required for each full-duplex node.
A network technician is installing a new managed 10/100 Mbps switch on the network. The network has an older printer with a 10Mbps network adapter that will be moved to the new switch.Which of the following settings on the switch will need to be configured to support the printer?（）A. MAC filteringB. IP addressC. PoED. Port speed
While troubleshooting a network outage, you discover that an employee brought a switch from home into the office to connect additional equipment to the network. In order to increase his speed, he connected this switch to both network ports in his office, resulting in a bridge loop.Which of these can you implement to prevent future occurrences of this issue?（）A.RSTPB.root guardC.BPDU guardD.GLBP
Refer to the exhibit. The routing protocols EIGRP and OSPF have been configured as indicated in the exhibit. Given the partial configuration of router R2, which network will be present in th e routing table of R4?（）A. Network BB. Network A and Network BC. Network AD. neither Network A nor Network B
A company is experiencing network delays. The network administrator discovers that a worker in a location far from the MDF has connected an old 10BASE-T switch with redundant links to the existing network.How could this action be responsible for the impaired network performance?（）A. Connecting a host to the old switch has created a broadcast storm.B. The 10BASE-T switch forced the entire network to be reduced to 10 Mbps operation.C. The old switch does not support VLANs, which has disabled the VLAN configuration of the entire the network.D. The old switch does not support full-duplex operation, effectively forcing half-duplex operation throughout the network.E. Spanning Tree Protocol has elected the old switch as the root bridge, creating inefficient data paths through the switched network.
A network associate is trying to understand the operation of the FLD Corporation by studying the network in the exhibit. The associate knows that the server in VLAN 4 provides the necessary resources to support the user hosts in the other VLANs. The associate needs to determine which interfaces are access ports. Which interfaces are access ports? （）A.Switch1 - Fa 0/2B.Switch1 - Fa 0/9C.Switch2 - Fa 0/3D.Switch2 - Fa 0/4E.Switch2 - Fa 0/8F.Router - Fa 1/0
The purpose of a network（ ）is to provide a shell around the network which will protect the system connected to the network from various threats. A. firewallB.switch C. routerD. gateway
Which statement correctly describes network security settings in Cisco Network Assistant for the Catalyst Express 500 Switch？（）A、The LOW setting enables broadcast storm control， but has no effect on the number of devices that can connect to a switch portB、The LOW setting enables broadcast storm control and limits the number of devices that can connect to a switch port.C、The LOW setting disables broadcast storm control but limits the number of devices that can connect to a switch portD、The default network setting is "HIGH"
A network administrator wants to control which user hosts can access the network based on their MAC address. What will prevent workstations with unauthorized MAC addresses from connecting to the network through a switch?（）A、BPDUB、Port securityC、RSTPD、STPE、VTPF、Blocking mode
A network associate is trying to understand the operation of the FLD Corporation by studying the network in the exhibit. The associate knows that the server in VLAN 4 provides the necessary resources to support the user hosts in the other VLANs. The associate needs to determine which interfaces are access ports. Which interfaces are access ports? （）A、Switch1 - Fa 0/2B、Switch1 - Fa 0/9C、Switch2 - Fa 0/3D、Switch2 - Fa 0/4E、Switch2 - Fa 0/8F、Router - Fa 1/0
As an experienced network engineer, you are asked to troubleshoot a CIS network outage. During the troubleshooting process, you notice that one of your colleagues connects additional devices to the network with the use of his own switch. With the purpose of improving speed, the switch is attached to both network ports in an office, which leads to bridge loop. Enabling which of the following feature will be able to prevent this problem from happening again?（）A、GLBPB、RSTPC、BPDU guardD、root guard
Which term describes a spanning-tree network that has all switch ports in either the blocking or forwarding state?（）A、redundantB、spannedC、provisionedD、converged
A network administrator needs to force a high-performance switch that is located in the MDF to become the root bridge for a redundant path switched network. What can be done to ensure that this switch assumes the role as root bridge（）。A、Establish a direct link from the switch to all other switches in the network.B、Assign the switch a higher MAC address than the other switches in the network have.C、Configure the switch so that it has a lower priority than other switches in the network.D、Configure the switch for full-duplex operation and configure the other switches for half-duplex operation.E、Connect the switch directly to the MDF router, which will force the switch to assume the role of root bridge.
You are configuring a new Catalyst switch that you want to manage remotely from workstations on other network segments within your enterprise.Which of the following are required to allow remote management of the switch over IP?（）A、The switch name must match the workgroup name of the local network.B、The switch must be configured with an IP address and default gateway.C、The remote workstations must have access to the management VLAN of the switch.D、CDP must be enabled on the switch so that it can be located by other devices on the network.
A user on a network cannot access any network resources. The link light on the computer showsthat a connection is present. Which of the following is the MOST likely cause of the problem?（）A、The wrong cable type has been used.B、. IDS has shut down the computer's switch port.C、The port on the switch is configured incorrectlyD、Spanning tree protocol was implemented.
A user is unable to connect to the network. A network technician is able to determine that there is a problem on the switch. All other users on that switch are able to connect successfully to the network. Which of the following is a probable cause？（）A、Switching loop is occurring on the switch.B、Wrong subnet mask on the switch.C、Incorrect SNMP settings on the switch.D、Port is misconfigured on the switch.
Which of the following network devices should be installed at a data center to intelligently distribute client connections to a pool of servers?（）A、A proxy serverB、A load balancerC、A layer two switchD、A multilayer switch
Your network contains a Hyper-V host named Hyperv1 that runs Windows Server 2012 R2. Hyperv1 has a virtual switch named Switch1. You replace all of the network adapters on Hyperv1 with new network adapters that support singleroot I/O virtualization （SR-IOV）. You need to enable SR-IOV for all of the virtual machines on Hyperv1. Which two actions should you perform？（）A、On each virtual machine， modify the Advanced Features settings of the network adapterB、Modify the settings of the Switch1 virtual switchC、Delete， and then recreate the Switch1 virtual switchD、On each virtual machine， modify the BIOS settingsE、On each virtual machine， modify the Hardware Acceleration settings of the network adapter
多选题You are configuring a new Catalyst switch that you want to manage remotely from workstations on other network segments within your enterprise.Which of the following are required to allow remote management of the switch over IP?（）AThe switch name must match the workgroup name of the local network.BThe switch must be configured with an IP address and default gateway.CThe remote workstations must have access to the management VLAN of the switch.DCDP must be enabled on the switch so that it can be located by other devices on the network.
单选题Which statement describes a spanning-tree network that has converged?（）AAll switch and bridge ports are in the forwarding state.BAll switch and bridge ports are assigned as either root or designated ports.CAll switch and bridge ports are in either the forwarding or blocking state.DAll switch and bridge ports are either blocking or looping.
单选题While troubleshooting a network outage, you discover that an employee brought a switch from home into the office to connect additional equipment to the network. In order to increase his speed, he connected this switch to both network ports in his office, resulting in a bridge loop. Which of these can you implement to prevent future occurrences of this issue?（）ARSTPBroot guardCBPDU guardDGLBP
多选题You work as an administrator at ABC.com. The ABC.com network consists of a single domain named ABC.com. All servers in the ABC.com domain， including domain controllers， have Windows Server 2012 R2 installed.ABC.com has a Hyper-V server， named ABC-SR13， which hosts multiple virtual machines. You have enabled the use of Single-root I/O virtualization.Which of the following is TRUE with regards to using Single-root I/O virtualization？（）AIt maximizes network throughput， while minimizing network latency.BIt maximizes network throughput， as well as network latency.CIt avoids the virtual switch stack and allows the virtual machine direct access to the actual network switch.DIt prevents the virtual machine from accessing the network switch directly.
单选题A network administrator wants to control which user hosts can access the network based on their MAC address. What will prevent workstations with unauthorized MAC addresses from connecting to the network through a switch?（）ABPDUBPort securityCRSTPDSTPEVTPFBlocking mode
单选题A network technician is installing a new managed 10/100 Mbps switch on the network. The network has an older printer with a 10Mbps network adapter that will be moved to the new switch. Which of the following settings on the switch will need to be configured to support the printer?（）AMAC filteringBIP addressCPoEDPort speed
单选题Which statement correctly describes network security settings in Cisco Network Assistant for the Catalyst Express 500 Switch？（）AThe LOW setting enables broadcast storm control， but has no effect on the number of devices that can connect to a switch portBThe LOW setting enables broadcast storm control and limits the number of devices that can connect to a switch port.CThe LOW setting disables broadcast storm control but limits the number of devices that can connect to a switch portDThe default network setting is HIGH