A network administrator needs to force a high-performance switch that is located in the MDF to become the root bridge for a redundant path switched network. What can be done to ensure that this switch assumes the role as root bridge（）。A、Establish a direct link from the switch to all other switches in the network.B、Assign the switch a higher MAC address than the other switches in the network have.C、Configure the switch so that it has a lower priority than other switches in the network.D、Configure the switch for full-duplex operation and configure the other switches for half-duplex operation.E、Connect the switch directly to the MDF router, which will force the switch to assume the role of root bridge.
A network administrator needs to force a high-performance switch that is located in the MDF to become the root bridge for a redundant path switched network. What can be done to ensure that this switch assumes the role as root bridge（）。
- A、Establish a direct link from the switch to all other switches in the network.
- B、Assign the switch a higher MAC address than the other switches in the network have.
- C、Configure the switch so that it has a lower priority than other switches in the network.
- D、Configure the switch for full-duplex operation and configure the other switches for half-duplex operation.
- E、Connect the switch directly to the MDF router, which will force the switch to assume the role of root bridge.
相关考题：
A network administrator has configured source NAT, translating to an address that is on a locally connected subnet.The administrator sees the translation working, but traffic does not appear to come back.What is causing the problem?（）A. The host needs to open the telnet port.B. The host needs a route for the translated address.C. The administrator must use a proxy-arp policy for the translated address.D. The administrator must use a security policy, which will allow communication between the zones.
An administrator replaced a router with a switch. End users are able to access network shares butare not able to access the Internet. Which of the following is the BEST explanation why the usersare unable to access the Internet?（）A. Router routes traffic between different networks and a switch does notB. The new switch is faulty and needs to be replaced and configured correctlyC. The firewall needs to be setup to allow traffic to reach the InternetD. The switch needs to be setup to forward data traffic to the Internet
An administrator has completed the installation of a new WLAN. Which of the following configuration management documents needs to be updated?() A. Logical network diagramB. History logsC. Baseline configurationsD. Wiring schematics
A network administrator needs to allow only one Telnet connection to a router. For anyone viewing the configuration and issuing the show run command, the password for Telnet access should be encrypted. Which set of commands will accomplish this task?（）A.B.C.D.
For security reasons, the network administrator needs to prevent pings into the corporate networks from hosts outside the internetwork. Which protocol should be blocked with access control lists()。 A.IPB.ICMPC.TCPD.UDP
A network administrator needs to configure a serial link between the main office and a remote location. The router at the remote office is a non-Cisco router.How should the network administrator configure the serial interface of the main office router to make the connection?（）A.B.C.D.
A user complains that the network printer is not printing. The system administrator knows there is a print queue for the network printer and needs to check on the queue. Which command is run?（）A、 netstat B、 lpstat C、 telinit D、 prtconf
You are a network administrator and you need to implement a routing protocol on your network that provides: * Scalability * VLSM support * Minimal overhead * Support for connecting networks using routers of multiple vendors Which of the following routing protocol would best serve your needs?（）A、VTPB、RIP version 1C、EIGRPD、OSPFE、IGRPF、CDP
A network administrator needs to configure port security on a switch.which two statements are true？（）A、The network administrator can apply port security to dynamic access portsB、The network administrator can configure static secure or sticky secure mac addresses in the voice vlan.C、The sticky learning feature allows the addition of dynamically learned addresses to the runningconfiguration.D、The network administrator can apply port security to EtherChannels.E、When dynamic mac address learning is enabled on an interface，the switch can learn new addresses，up to the maximum defined.
An administrator needs a network that can support up to 800 hosts on the same subnet. Which of the following is the MINIMUM subnet mask that should be used？（）A、255.0.0.0B、255.255.0.0C、255.255.252.0D、255.255.255.0
A network administrator needs to configure port security on a switch.which two statements are true?（）A、The network administrator can apply port security to dynamic access portsB、The network administrator can configure static secure or sticky secure mac addresses in the voice vlan.C、The sticky learning feature allows the addition of dynamically learned addresses to the running configuration.D、The network administrator can apply port security to EtherChannels.E、When dynamic mac address learning is enabled on an interface,the switch can learn new addresses,up to the maximum defined.
Refer to the exhibit. A junior network administrator was given the task of configuring port security on SwitchA to allow only PC_A to access the switched network through port fa0/1. If any other device is detected, the port is to drop frames from this device. The administrator configured the interface and tested it with successful pings from PC_A to RouterA, and then observes the output from these two show commands.Which two of these changes are necessary for SwitchA to meet the requirements? （）A、Port security needs to be globally enabled.B、Port security needs to be enabled on the interface.C、Port security needs to be configured to shut down the interface in the event of a violation.D、Port security needs to be configured to allow only one learned MAC address.E、Port security interface counters need to be cleared before using the show command.F、The port security configuration needs to be saved to NVRAM before it can become active.
The Company network administrator needs to enable VTP pruning within the Company network. What action should a network administrator take to enable VTP pruning on an entire management domain？（）A、Enable VTP pruning on any switch in the management domainB、Enable VTP pruning on any client switch in the domainC、Enable VTP pruning on a VTP server in the management domainD、Enable VTP pruning on every switch in the domainE、None of the other alternatives apply
A network administrator needs to add an additional connection to a room. The administrator adds a new Ethernet switch and must connect it to an existing switch. Which cable type should be used to connect the two switches?（）A、CAT3 cableB、Serial cableC、Crossover cableD、Rollover cable
An administrator replaced a router with a switch. End users are able to access network shares butare not able to access the Internet. Which of the following is the BEST explanation why the usersare unable to access the Internet?（）A、Router routes traffic between different networks and a switch does notB、The new switch is faulty and needs to be replaced and configured correctlyC、The firewall needs to be setup to allow traffic to reach the InternetD、The switch needs to be setup to forward data traffic to the Internet
A network administrator wants to analyze the historical performance of the servers in the organization and forecast the system performance needs into the future. Which add-on component of IBM Director would be used to assist with this task？（）A、Capacity ManagerB、Resource MonitorsC、System AvailabilityD、System Performance Monitor
An administrator needs to authenticate users to the network, authorize network activities, and account for activities done. Which of the following are services that will BEST meet these goals?（）(Select TWO).A、TACACS+B、RADIUSC、KerberosD、802.1XE、RRAS
单选题A user complains that the network printer is not printing. The system administrator knows there is a print queue for the network printer and needs to check on the queue. Which command is run?（）A netstat B lpstat C telinit D prtconf
单选题An administrator needs to terminate network cables that have just been installed in the main communications closet. Which of the following tools is required?（）AMultimeterBSnipsCToner probeDPunch down tool
单选题An administrator has a single 14U rack. The administrator needs to install fifteen servers； rack-mounted redundant uninterruptible power supplies （UPSs）， a network switch， and a KVM. Which of the following server types would be BEST suited for this scenario？（）ABlade serversBRackmount serversCTower serversDWeb servers
单选题A network administrator has configured source NAT, translating to an address that is on a locally connected subnet.The administrator sees the translation working, but traffic does not appear to come back. What is causing the problem?（）AThe host needs to open the telnet port.BThe host needs a route for the translated address.CThe administrator must use a proxy-arp policy for the translated address.DThe administrator must use a security policy, which will allow communication between the zones.
多选题Refer to the exhibit. A junior network administrator was given the task of configuring port security on SwitchA to allow only PC_A to access the switched network through port fa0/1. If any other device is detected, the port is to drop frames from this device. The administrator configured the interface and tested it with successful pings from PC_A to RouterA, and then observes the output from these two show commands.Which two of these changes are necessary for SwitchA to meet the requirements? （）APort security needs to be globally enabled.BPort security needs to be enabled on the interface.CPort security needs to be configured to shut down the interface in the event of a violation.DPort security needs to be configured to allow only one learned MAC address.EPort security interface counters need to be cleared before using the show command.FThe port security configuration needs to be saved to NVRAM before it can become active.
单选题An administrator has completed the installation of a new WLAN. Which of the following configuration management documents needs to be updated?（）ALogical network diagramBHistory logsCBaseline configurationsDWiring schematics
单选题The Company network administrator needs to enable VTP pruning within the Company network. What action should a network administrator take to enable VTP pruning on an entire management domain？（）AEnable VTP pruning on any switch in the management domainBEnable VTP pruning on any client switch in the domainCEnable VTP pruning on a VTP server in the management domainDEnable VTP pruning on every switch in the domainENone of the other alternatives apply
单选题You are a network administrator and you need to implement a routing protocol on your network that provides: * Scalability * VLSM support * Minimal overhead * Support for connecting networks using routers of multiple vendors Which of the following routing protocol would best serve your needs?（）AVTPBRIP version 1CEIGRPDOSPFEIGRPFCDP
单选题For security reasons, the network administrator needs to prevent pings into the corporate networks from hosts outside the internetwork. Which protocol should be blocked with access control lists？（）AIPBICMPCTCPDUDP
多选题An administrator needs to authenticate users to the network, authorize network activities, and account for activities done. Which of the following are services that will BEST meet these goals?（）(Select TWO).ATACACS+BRADIUSCKerberosD802.1XERRAS
单选题An administrator needs a network that can support up to 800 hosts on the same subnet. Which of the following is the MINIMUM subnet mask that should be used？（）A255.0.0.0B255.255.0.0C255.255.252.0D255.255.255.0