Which of the following should the technician do FIRST when removing a paper jam?（）A、Open all the doors in the printer.B、Clear the print queue.C、Turn the printer off.D、Take the printer offline.
Which of the following should the technician do FIRST when removing a paper jam?（）
- A、Open all the doors in the printer.
- B、Clear the print queue.
- C、Turn the printer off.
- D、Take the printer offline.
相关考题：
A user is unable to print to the network printer. A print job appears in their print queue and cannotbe deleted. The user has the correct permissions to modify and delete print jobs. All other users are able to print to the network printer. Which of the following procedures should the technician try FIRST?（）A. Cycle the power on the network printer.B. Verify the network cable is connected to the printer.C. Reinstall the printer driver.D. Restart the print spooler service.
Which of the following should the technician do FIRST when removing a paper jam?() A. Open all the doors in the printer.B. Clear the print queue.C. Turn the printer off.D. Take the printer offline.
Which of the following will MOST likely happen if a laser printer displays ‘15% fuser remaining’?() A. The printer will print according to specification.B. The printer will stop printing immediately.C. The printer will take longer to print.D. The printer will print blank sheets of paper
A technician receives a new printer for repair and the work order states that when powered on theprinter makes a loud noise and will not print. Which of the following actions should the technician take？ （）A、Install new drivers on the computer.B、Install a new ink cartridge.C、Install a print head on the printer.D、Remove the packing tape from the print head.
A user is unable to print to the network printer. A print job appears in their print queue and cannotbe deleted. The user has the correct permissions to modify and delete print jobs. All other users are able to print to the network printer. Which of the following procedures should the technician try FIRST?（）A、Cycle the power on the network printer.B、Verify the network cable is connected to the printer.C、Reinstall the printer driver.D、Restart the print spooler service.
A technician receives a printer that is printing ink smudges on random sheets of paper. Which of the following should the technician try FIRST？（）A、Replace the printer.B、Replace print head assembly.C、Clean the print head.D、Use a different brand of paper.
A technician has resolved a paper jam. After the jam is cleared, the display continues to indicate that the printer is jammed. Which of the following should be performed NEXT?（）A、Power cycle the printerB、Print a test pageC、Remove all the paper trays and restart the printerD、Remove and replace the roller
A technician receives a dot matrix printer for repair and the work order states that the printer is only printing one-half of each character. Which of the following should the technician replace？（）A、print headB、fuserC、injectorD、print nozzle
A technician receives a new printer for repair and the work order states that when powered on the printer makes a loud noise and will not print. Which of the following actions should the technician take？ （）A、Install new drivers on the computer.B、Install a new ink cartridge.C、Install a print head on the printer.D、Remove the packing tape from the print head.
A customer reports that the laser printer produces poor quality printouts. Having arrived onsite, the technician has a discussion with the customer and reviews some examples of their print jobs. Which of the following should the technician do NEXT? （）A、Clean the toner cartridge.B、Change the paper.C、Replace the fuser.D、Print a test page.
Which of the following will MOST likely happen if a laser printer displays ‘15% fuser remaining’?（）A、The printer will print according to specification.B、The printer will stop printing immediately.C、The printer will take longer to print.D、The printer will print blank sheets of paper
When installing an inkjet printer for the first time， which of the following should be done FIRST？ （）A、Print a test page from the Printer icon under the printers tab.B、Select the new printer as the default printer.C、Run the printhead alignment within the Tools folder of the printer.D、Ensure that the printer is set for bi-directional printing.
When connecting a laser printer to a network for the first time， a technician should FIRST：（）A、configure the network settings on the printer.B、ensure the cable is set to TCP/IP.C、enable the printer in the BIOS.D、configure the printer as bi-directional in Windows.
Several users report that they are unable to print to a new printer recently installed. The technician is unable to ping the printer. Which of the following is the MOST likely cause?（）A、No IP address on the printerB、Paper jam in the paper feed trayC、Improper DNS settings on the printerD、Broken LCD screen on the printer
Which of the following does an out-of-memory error indicate on a printer?（）A、A faulty memory module in the printer.B、A postscript print job has been sent to the printer.C、A large print job has been sent to the printer.D、The printer firmware needs to be updated.
A laser printer is sent for repair and the work order indicates that there is an image printing problem. Which of the following should a technician do FIRST to confirm this problem？（）A、Run the calibration feature on the laser printer.B、Run a self-test image page from the printer.C、Clean the corona wire and return printer.D、Print a test page from a computer.
A laser printer has a vertically repetitive print defect. Before attempting to repair the printer，a technician should determine：（）A、the distance between the spots.B、which paper tray was used to print the document.C、which driver was used to print the document.D、which application was used to print the document.
A customer states that they cannot print from their laser printer. The printer displays a ‘Paper Jam’ error. Upon inspection there is no paper jam. The only indication is a clicking sound when the user tries to print. Which of the following is the MOST likely cause?（）A、Feed roller gear is broken.B、Feed rollers are dirty.C、Fuser has overheated.D、Toner cartridge needs to be replaced.
A user notices the department laser printer is printing light. Which of the following items should a technician do FIRST to fix this issue? （）A、Remove and clean the fuser assembly with an alcohol based cleaner.B、Install a maintenance kit and reset all page counts to zero.C、Perform a full power cycle on the printer.D、Clean the paper path with a damp cloth and canned air to remove any debris.
A laser printer has an error tray two paper jam but tray two does not have any paper in it. Which of the following should the technician do FIRST? （）A、Replace the tray two paper sensor and run the printer self test.B、Remove the tray two paper sensor and clean the printhead.C、Check the tray two paper sensors for blockage and run the printer self test.D、Check the tray two paper rollers for blockage, clean the printhead, and run the printer self test.
A user reports that they are unable to print to a remote printer. Which of the following should the technician check FIRST？（）A、Printer driverB、Protocol stackC、Network connectivityD、Correct patch application
单选题A user reports that they are unable to print to a remote printer. Which of the following should the technician check FIRST？（）APrinter driverBProtocol stackCNetwork connectivityDCorrect patch application
单选题A technician has resolved a paper jam. After the jam is cleared, the display continues to indicate that the printer is jammed. Which of the following should be performed NEXT?（）APower cycle the printerBPrint a test pageCRemove all the paper trays and restart the printerDRemove and replace the roller
单选题Several users report that they are unable to print to a new printer recently installed. The technician is unable to ping the printer. Which of the following is the MOST likely cause?（）ANo IP address on the printerBPaper jam in the paper feed trayCImproper DNS settings on the printerDBroken LCD screen on the printer
单选题Which of the following should the technician do FIRST when removing a paper jam?（）AOpen all the doors in the printer.BClear the print queue.CTurn the printer off.DTake the printer offline.
单选题A technician receives a printer that is printing ink smudges on random sheets of paper. Which of the following should the technician try FIRST？（）AReplace the printer.BReplace print head assembly.CClean the print head.DUse a different brand of paper.
单选题Which of the following will MOST likely happen if a laser printer displays ‘15% fuser remaining’?（）AThe printer will print according to specification.BThe printer will stop printing immediately.CThe printer will take longer to print.DThe printer will print blank sheets of paper