A server has had a drive fail in its storage RAID set. The administrator swaps the drive with a replacement and the RAID set does not automatically start to rebuild the replaced drive. Which ofthe following utilities would MOST likely be used to initialize the rebuilding of the replace mentdrive？（）A、Net useB、Array managementC、FdiskD、Disk Management Plug-in
A server has had a drive fail in its storage RAID set. The administrator swaps the drive with a replacement and the RAID set does not automatically start to rebuild the replaced drive. Which ofthe following utilities would MOST likely be used to initialize the rebuilding of the replace mentdrive？（）
- A、Net use
- B、Array management
- C、Fdisk
- D、Disk Management Plug-in
相关考题：
A technician is upgrading an internal IDE drive in a laptop. Which of the following HDD types is thetechnician MOST likely using?() A.PATAB.SATAC.Solid stateD.RAID
A Windows 2003 Server is no longer able to access its internal SCSI drive. The cables are connected, the drive has power, and the drive shows up in Device Manager; however, the My Computer window does not show the drive that was previously working and formatted with NTFS.Which of the following would be the FIRST step in regaining access to the drive?（）A. Reformat the NTFS partition.B. Recreate the partition that was deleted.C. Rewrite the MBR.D. Run a check disk on the drive
A system administrator needs to maintain 1.2TB of storage for a database server. There are six 250GB drives available in the server for storage space. Which of the following RAID configurations would be the BEST choice given that performance and fault tolerance are important factors?（）A. RAID 1 across drive pairs totaling 3 pairsB. RAID 5 across all 6 drivesC. RAID 10 across all 6 drivesD. RAID 0 across all 6 drives
An administrator has just upgraded a server from non-hot plug storage to all hot plug storage. The administrator powers up the server, during POST the RAID controller is recognized but none of the drive lights flash.Which of the following should the administrator do FIRST to troubleshoot the problem?（）A. Check the backplane cabling.B. Check the server BIOS.C. Update the RAID controller firmware.D. Install the latest hard drive firmware
An administrator has just upgraded a server from non-hot plug storage to all hot plug storage. Theadministrator powers up the server， during POST the RAID controller is recognized but none of the drivelights flash. Which of the following should the administrator do FIRST to trouble shoot the problem？（）A、 Check the backplane cabling.B、 Check the server BIOS.C、 Update the RAID controller firmware.D、 Install the latest hard drive firmware.
An administrator has just upgraded a server from non-hot plug storage to all hot plug storage. The administrator powers up the server, during POST the RAID controller is recognized but none of the drive lights flash. Which of the following should the administrator do FIRST to troubleshoot the problem?（）A、Check the backplane cabling.B、Check the server BIOS.C、Update the RAID controller firmware.D、Install the latest hard drive firmware
A system administrator has a failed disk drive that is mirrored to another disk drive. They successfully removed the logical volume copies off of the failed disk drive. Which of the following commands should be used to remove the failed disk drive from the volume group？（）A、chvgB、rmdevC、reducevgD、exportvg
A server has a single failed hard drive in an array that is accessed through a hot plug backplane to ease replacement of failed drives. After replacing the drive several times， each of the replacement drives failed to power up and rebuild as the failed drive. Which of the following is the MOST likely cause of the failures？（）A、 The backplane has failed and needs to be replaced.B、 The array must be disbanded and recreated from a backup source to recognize the replacement drive.C、 There is a conflict with the optical drive on the server.D、 The server power supply is failing and not providing enough power for all the drives.
After a server inspection， an administrator notices a single drive failure on a server configured with RAID 5. Which of the following is the NEXT step to start rebuilding the array？（）A、Reestablish the mirror array.B、Perform online volume expansion.C、Insert hot plug drive.D、Move data to another volume.
A server contains a 3 disk RAID 5 array. The red LED is illuminated on one of the drives. Which of the following should the server administrator perform？（）A、Replace the driveB、Restore the drive from backupC、Reboot the serverD、Reconfigure RAID 5 to RAID 10
An administrator has removed a SATA hard drive from a failed server. Which of the following adapters would MOST likely be used by the administrator to transfer files from the drive to a laptop？（）A、SATA to SCSIB、SATA to HBAC、SATA to USBD、SATA to SAS
Which of the following storage tools could be used to initiate the rebuilding of a failed hard drive?（）A、RAID array managementB、CHKDSKC、Monitoring agentsD、Partitioning management
A technician manages a server that contains sensitive data. The server currently has two hard drives， one hosting the operating system and other generic files and the second hosting sensitive data. The technician needs to implement a technology that would guard against data loss for only the sensitive data， while adding only one additional hard drive. Which of the following should the technician implement to avoid reformatting any drives？（）A、RAID 0B、RAID 1C、RAID 3D、RAID 5
A system administrator needs to maintain 1.2TB of storage for a database server. There are six 250GB drives available in the server for storage space. Which of the following RAID configurations would be the BEST choice given that performance and fault tolerance are important factors?（）A、RAID 1 across drive pairs totaling 3 pairsB、RAID 5 across all 6 drivesC、RAID 10 across all 6 drivesD、RAID 0 across all 6 drives
A Windows 2003 Server is no longer able to access its internal SCSI drive. The cables areconnected， the drive has power， and the drive shows up in Device Manager； however， the My Computerwindow does not show the drive that was previously working and formatted with NTFS. Which of the following would be the FIRST step in regaining access to the drive？ （）A、 Reformat the NTFS partition.B、 Recreate the partition that was deleted.C、 Rewrite the MBR.D、 Run a check disk on the drive.
A Windows 2003 Server is no longer able to access its internal SCSI drive. The cables are connected, the drive has power, and the drive shows up in Device Manager; however, the My Computer window does not show the drive that was previously working and formatted with NTFS. Which of the following would be the FIRST step in regaining access to the drive?（）A、Reformat the NTFS partition.B、Recreate the partition that was deleted.C、Rewrite the MBR.D、Run a check disk on the drive
An administrator has added a new hard drive to a server that is running out of space on its C Drive and is experiencing slow performance. The administrator needs to free up space on the C Drive.Which of the following is the BEST action for the administrator to take to free up space on the drive？（）A、Move the page file to the new drive.B、Copy the system32 directory to the new drive.C、Convert the C drive to a basic disk.D、Setup a software RAID to mirror the C drive.
Which of the following MOST correctly describes a hot spare？（）A、A drive assigned to an array that will only hold parity information used for rebuilding a failedarray drive.B、An external hard drive to which all data is replicated to for recovery in the event of a failure.C、A drive assigned to an array that will automatically be used to rebuild a failed array drive.D、An extra drive purchased and stored in the parts cabinet to replace failed drives.
A technician is upgrading an internal IDE drive in a laptop. Which of the following HDD types is thetechnician MOST likely using?（）A、PATAB、SATAC、Solid stateD、RAID
A Windows 2003 Server is no longer able to access its internal SCSI drive. The cables areconnected， the drive has power， and the drive shows up in Device Manager； however， the My Computerwindow does not show the drive that was previously working and formatted with NTFS. Which of thefollowing would be the FIRST step in regaining access to the drive？ （）A、 Reformat the NTFS partition.B、 Recreate the partition that was deleted.C、 Rewrite the MBR.D、 Run a check disk on the drive.
An administrator reboots a ten drive server, with a RAID 10 array, after a power failure and receives an error logical drive failed. Which of the following is the MOST likely cause?（）A、Corrupt file system tableB、Backplane failureC、Multiple drive failureD、Bad cable
An administrator has replaced a faulty drive in a server using software RAID. The drive needs to now be partitioned before being added back to the array. Which of the following tools should the administrator use to accomplish this？（）A、chkdskB、mountC、fsckD、diskpart
单选题A Windows 2003 Server is no longer able to access its internal SCSI drive. The cables areconnected， the drive has power， and the drive shows up in Device Manager； however， the My Computerwindow does not show the drive that was previously working and formatted with NTFS. Which of thefollowing would be the FIRST step in regaining access to the drive？ （）A Reformat the NTFS partition.B Recreate the partition that was deleted.C Rewrite the MBR.D Run a check disk on the drive.
单选题A server has a single failed hard drive in an array that is accessed through a hot plug backplane to ease replacement of failed drives. After replacing the drive several times， each of the replacement drives failed to power up and rebuild as the failed drive. Which of the following is the MOST likely cause of the failures？（）A The backplane has failed and needs to be replaced.B The array must be disbanded and recreated from a backup source to recognize the replacement drive.C There is a conflict with the optical drive on the server.D The server power supply is failing and not providing enough power for all the drives.
单选题A Windows 2003 Server is no longer able to access its internal SCSI drive. The cables areconnected， the drive has power， and the drive shows up in Device Manager； however， the My Computerwindow does not show the drive that was previously working and formatted with NTFS. Which of the following would be the FIRST step in regaining access to the drive？ （）A Reformat the NTFS partition.B Recreate the partition that was deleted.C Rewrite the MBR.D Run a check disk on the drive.
单选题Which of the following storage tools could be used to initiate the rebuilding of a failed hard drive？（）A RAID array managementB CHKDSKC Monitoring agentsD Partitioning management
单选题An administrator reboots a ten drive server， with a RAID 10 array， after a power failure and receives an error logical drive failed. Which of the following is the MOST likely cause？（）A Corrupt file system tableB Backplane failureC Multiple drive failureD Bad cable