What are three default role-mapping rule values that are available for all realms?（）A、UsernameB、LDAP userC、CertificateD、Custom expressionsE、Source y IP
What are three default role-mapping rule values that are available for all realms?（）
- A、Username
- B、LDAP user
- C、Certificate
- D、Custom expressions
- E、Source y IP
相关考题：
What are three default role－mapping rule values that are available for all realms?() A. UsernameB. LDAP userC. CertificateD. Custom expressionsE. Source y IP
What is one of the reasons that custom QoS ACLs are recommended over automatic QoS when configuring ports on a Catalyst 6500 for use with IP phones?() A. 79xx IP phones do not automatically mark voice packets with non-zero DSCP values.B. 79xx IP phones do not mark protocol packets such as DHCP, DNS, or TFTP with non-zero DSCP values.C. 79xx IP phones do not mark voice packets with optimal DSCP values.D. 79xx IP phones use a custom protocol to communicate CDP information to the switch.
The following configuration line was added to router R1 Access－list 101 permit ip 10.25.30.0 0.0.0.255 any What is the effect of this access list configuration?() A. permit all packets matching the first three octets of the source address to all destinationsB. permit all packet matching the last octet of the destination address and accept all source addressesC. permit all packet matching the host bits in the source address to all destinationsD. permit all packet from the third subnet of the network address to all destinations
What is the purpose using the traceroute command?() A. to map all the devices on a network.B. to display the current TCP/IP configuration values.C. to see how a device MAC address is mapped to its IP address.D. to see the path a packet will take when traveling to a specified destination.E. to display the MTU values for each router in a specified network path from source to a destination.
What are three values that must be the same within a sequence of packets for Netflow to consider them a network flow?() A.source IP addressB.source MAC addressC.egress interfaceD.ingress interfaceE.destination IP addressF.IP next-hop
The following configuration line was added to router R1Access－list 101 permit ip 10.25.30.00.0.0.255 anyWhat is the effect of this access list configuration?() A.ermit all packets matching the first three octets of the source address to all destinationsB.permit all packet matching the last octet of the destination address and accept all source addressesC.permit all packet matching the host bits in the source address to all destinationsD.permit all packet from the third subnet of the network address to all destinations
What three pieces of information can be used in an extended access list to filter traffic (Choose three.)()。 A.protocolB.VLAN numberC.TCP or UDP port numbersD.source switch port numberE.source IP address and destination IP addressF.source MAC address and destination MAC address
What is the effect of the following access list condition access－list 101 permit ip 10.25.30.0 0.0.0.255 any()。 A.permit all packets matching the first three octets of the source address to all destinationsB.permit all packets matching the last octet of the destination address and accept all source addressesC.permit all packets from the third subnet of the network address to all destinationsD.permit all packets matching the host bits in the source address to all destinationsE.permit all packets to destinations matching the first three octets in the destination address
The following configuration line was added to router R1 Access-list 101 permit ip 10.25.30.00.0.0.255 any What is the effect of this access list configuration？（）A、ermit all packets matching the first three octets of the source address to all destinationsB、permit all packet matching the last octet of the destination address and accept all source addressesC、permit all packet matching the host bits in the source address to all destinationsD、permit all packet from the third subnet of the network address to all destinations
What can be specified in IP VACLs?（）A、Protocol and IP source onlyB、IP Source, IP Destination and portsC、IP Source OnlyD、IP Destination Only
What are three values that must be the same within a sequence of packets for Netflow to consider them a network flow?（）A、source IP addressB、source MAC addressC、egress interfaceD、ingress interfaceE、destination IP addressF、IP next-hop
What is the default behaviour of PIM-SSM If there are multiple equal-cost paths to the multicast source？（）A、It will send the join only to the neighbor with the highest IP address.B、It will send the join only to the neighbor with the lowest IP address.C、It will send the join in a round-robin fashion across all neighbors.D、It will send the join to all neighbors.
A standard IP access list is applied to an Ethernet interface of a router. What does this standard access list filter on?（）A、The source and destination addressesB、The destination port numberC、The destination addressD、The source addressE、All of the above
下列高级ACL规则配置正确的有（）。A、rule permit ip icmp-type echoB、rule permit ip source-port eq 1024C、rule permit ip tos normal dscp efD、rule permit udp time-range udp
What three pieces of information can be used in an extended access list to filter traffic (Choose three.)（）。A、protocolB、VLAN numberC、TCP or UDP port numbersD、source switch port numberE、source IP address and destination IP addressF、source MAC address and destination MAC address
The following configuration line was added to router R1 Access-list 101 permit ip 10.25.30.0 0.0.0.255 any What is the effect of this access list configuration?（）A、permit all packets matching the first three octets of the source address to all destinationsB、permit all packet matching the last octet of the destination address and accept all source addressesC、permit all packet matching the host bits in the source address to all destinationsD、permit all packet from the third subnet of the network address to all destinations
What is the effect of the following access list condition access-list 101 permit ip 10.25.30.0 0.0.0.255 any（）。A、permit all packets matching the first three octets of the source address to all destinationsB、permit all packets matching the last octet of the destination address and accept all source addressesC、permit all packets from the third subnet of the network address to all destinationsD、permit all packets matching the host bits in the source address to all destinationsE、permit all packets to destinations matching the first three octets in the destination address
A cluster node has three network interfaces that support three resource groups with three service IP labels. Each IP label uses IPAT via IP aliasing. One of the adapters fails， and all of the IP labels on it are moved to other interfaces as expected. The system supports the "hot swap" replacement of the network interfaces， and the system engineer has corrected the problem. What will happen to the service IP lab3els when the repaired adapter is noticed by HACMP？（）A、 They will migrate back to the repaired interface.B、 They will not move，the interface will join the pool of available resources.C、 They will not move； the interface will join the cluster as an available non-service adapter. D、 They will migrate to the repaired interface to create an equal number of service IP labels per interface.
Which three attributes are carried in a source active message?（）A、NLRI informationB、IP address of originating RPC、address of multicast sourceD、all active RPs in the local domainE、group address to which the source is sending
Your manager has informed you that only specific users can have access to the Preferred Members role, and that these users are restricted to the Preferred Members role. The Preferred Members role-mapping rule is currently set as the last rule in your role-mapping rules and is based on username. Currently all users are assigned to the Preferred Members role-mapping rule. Which three changes in the admin GUI will enforce your managers change request?（）A、Move the Preferred Members role-mapping rule to the top of the list.B、Remove the Preferred Members role from the role-mapping rule.C、Edit the Preferred Members role-mapping rule so that the username is equal to *.D、Edit the Preferred Members role-mapping rule so that only the select users are assigned to the role-mapping rule.E、Edit the Preferred Members role-mapping rule and select "Stop processing rules when this rule matches".
You administer a network with Windows-based endpoints that have custom software images. You want to use Host Checker to require that endpoints are running the custom software image.Which two Host Checker policy rules would be used to enforce this requirement?（）A、Isolate a file name unique to the custom image and create a custom rule-type of "File" which matches on the file. Select the "Required" option under the custom rule.B、Identify the MAC address unique to network cards installed in PCs with the custom image and create a custom rule-type of "MAC Address" which matches on the appropriate MAC address.C、Select the "Required" option under the custom rule Identify the IP address unique to the network cards installed in PCs with the custom image and create a custom rule-type of "IP Address" which matches on the appropriate IP address. Select the "Required" option under the custom rule.D、Isolate or create a unique Windows registry key for the custom image and create a custom rule- type of "Registry Setting" which matches on the name of the registry key.
单选题What is the effect of the following access list condition? access-list 101 permit ip 10.25.30.0 0.0.0.255 any（）。Apermit all packets matching the first three octets of the source address to all destinationsBpermit all packets matching the last octet of the destination address and accept all source addressesCpermit all packets from the third subnet of the network address to all destinationsDpermit all packets matching the host bits in the source address to all destinationsEpermit all packets to destinations matching the first three octets in the destination address
多选题What are three values that must be the same within a sequence of packets for Netflow to consider them a network flow?（）Asource IP addressBsource MAC addressCegress interfaceDingress interfaceEdestination IP addressFIP next-hop
单选题What is the purpose using the traceroute command?（）Ato map all the devices on a network.Bto display the current TCP/IP configuration values.Cto see how a device MAC address is mapped to its IP address.Dto see the path a packet will take when traveling to a specified destination.Eto display the MTU values for each router in a specified network path from source to a destination.
单选题What is one of the reasons that custom QoS ACLs are recommended over automatic QoS when configuring ports on a Catalyst 6500 for use with IP phones？（）A 79xx IP phones do not automatically mark voice packets with non-zero DSCP values.B 79xx IP phones do not mark protocol packets such as DHCP， DNS， or TFTP with non-zero DSCP values.C 79xx IP phones do not mark voice packets with optimal DSCP values.D 79xx IP phones use a custom protocol to communicate CDP information to the switch.
单选题What is the default behaviour of PIM-SSM If there are multiple equal-cost paths to the multicast source？（）AIt will send the join only to the neighbor with the highest IP address.BIt will send the join only to the neighbor with the lowest IP address.CIt will send the join in a round-robin fashion across all neighbors.DIt will send the join to all neighbors.
多选题What are three default role-mapping rule values that are available for all realms?（）AUsernameBLDAP userCCertificateDCustom expressionsESource y IP