多选题In computer networking a multicast address is an identifier for a group of hosts that have joined amulticast group. Multicast addressing can be used in the Link Layer （OSI Layer 2）， such as Ethernet Multicast， as well as at the Internet Layer （OSI Layer 3） as IPv4 or IPv6 Multicast. Whichtwo descriptions are correct regarding multicast addressing？（）AThe first 23 bits of the multicast MAC address are 0x01-00-5E. This is a reserved value thatindicates a multicast applicationBThe last 3 bytes （24 bits） of the multicast MAC address are 0x01-00-5E. This is a reservedvalue that indicates a multicast applicationCTo calculate the Layer 2 multicast address， the host maps the last 23 bits of the IP address intothe last 24 bits of the MAC address. The high-order bit is set to 0DThe first 3 bytes （24 bits） of the multicast MAC address are 0x01-00-5E. This is a reservedvalue that indicates a multicast application
多选题
In computer networking a multicast address is an identifier for a group of hosts that have joined amulticast group. Multicast addressing can be used in the Link Layer （OSI Layer 2）， such as Ethernet Multicast， as well as at the Internet Layer （OSI Layer 3） as IPv4 or IPv6 Multicast. Whichtwo descriptions are correct regarding multicast addressing？（）
A
The first 23 bits of the multicast MAC address are 0x01-00-5E. This is a reserved value thatindicates a multicast application
B
The last 3 bytes （24 bits） of the multicast MAC address are 0x01-00-5E. This is a reservedvalue that indicates a multicast application
C
To calculate the Layer 2 multicast address， the host maps the last 23 bits of the IP address intothe last 24 bits of the MAC address. The high-order bit is set to 0
D
The first 3 bytes （24 bits） of the multicast MAC address are 0x01-00-5E. This is a reservedvalue that indicates a multicast application
参考解析
解析：
暂无解析
相关考题：
Which three IP multicast address related statements are true?（）A、Multicast addresses 224.0.0.13 and 224.0.0.22 are reserved link - local addresses used by PIMv2 and IGMPv3B、Because they would map to overlapping IP multicast MAC addresses, multicast addresses 224.0.1.1 and 238.1.1.1 could not be used toget herC、Multicast addresses 224.0.0.0 through 224.0.0.255 are always forwarded because they are transmitted with Time to Live (TTL) greater than 1D、Multicast addresses 224.0.0.5 and 224.0.0.6 are source multicast addresses for OSPF routersE、The a dministratively scoped multicast addresses 239.0.0.0 through 239.255.255.255 are similar in purpose to RFC 1918 private unicast addressesF、Multicast address 224.0.1.1 has been reserved for the Network Time Protocol (NTP) by the IANA
What type of IPv6 address is this address： FF05：： 2：260：8FF://FE52：F9D8？（）A、multicast temporary node localB、multicast temporary site localC、unicast permanent link localD、multicast permanent node link localE、multicast permanent site localF、unicast temporary link local
Which three IP multicast group concepts are true?（）A、If a packet is sent to a multicast group address, the multicast frame contains the source multicast address.B、A router does not have to be a member of a multicast group to receive multicast data.C、A router must be a member of a multicast group to send to the group.D、A router does not have to be a member of a multicast group to send to the group.E、If a packet is sent to a multicast group address, all members of the multicast group will rece ive it.F、A router must be a member of a multicast group to receive multicast data.
What is the purpose of IGMP in a multicast implementation？（）A、 it is not used in multicastB、 it determines the virtual address group for a multicast destinationC、 it dynamically registers individual hosts in a multicast group on a specific LAND、 it is used on WAN connections to determine the maximum bandwidth of a connectionE、 it determines whether Bidirectional PIM or PIM sparse mode will be used for a multicast flow
What is the difference between the IPv6 addresses ：：/0 and ：：/128？（）A、：：/0 is the unspecified address， and ：：/128 is the multicast addressB、：：/0 is the unicast address， and ：：/128 is the anycast addressC、：：/0 is the unicast address， and ：：/128 is the multicast addressD、：：/0 is the anycast address， and ：：/128 is the multicast addressE、：：/0 is the default route， and ：：/128 is the unspecified addressF、：：/0 is the anycast address， and ：：/128 is the default address
RIPv2 differs from RIPv1 in that：（）A、it uses multicast address 224.0.0.10，instead of broadcastB、it uses multicast address 224.0.0.9，instead of broadcastC、it can use either multicast or broadcast addresses，instead of just broadcastD、it sends incremental updates，instead of periodic updatesE、it is classless，instead of classfulF、it supports authentication，and RIPv1 does not
In computer networking a multicast address is an identifier for a group of hosts that have joined amulticast group. Multicast addressing can be used in the Link Layer （OSI Layer 2）， such as Ethernet Multicast， as well as at the Internet Layer （OSI Layer 3） as IPv4 or IPv6 Multicast. Whichtwo descriptions are correct regarding multicast addressing？（）A、The first 23 bits of the multicast MAC address are 0x01-00-5E. This is a reserved value thatindicates a multicast applicationB、The last 3 bytes （24 bits） of the multicast MAC address are 0x01-00-5E. This is a reservedvalue that indicates a multicast applicationC、To calculate the Layer 2 multicast address， the host maps the last 23 bits of the IP address intothe last 24 bits of the MAC address. The high-order bit is set to 0D、The first 3 bytes （24 bits） of the multicast MAC address are 0x01-00-5E. This is a reservedvalue that indicates a multicast application
Which three IP multicast address related statements are true？ （Choose three.） （） A、Multicast addresses 224.0.0.0 through 224.0.0.255 are always forwarded because they are transmitted with Time to Live （TTL） greater than 1.B、Multicast addresses 224.0.0.5 and 224.0.0.6 are source multicast addresses for OSPF routers.C、Multicast addresses 224.0.0.13 and 224.0.0.22 are reserved link-local addresses used by PIMv2 and IGMPv3.D、Because they would map to overlapping IP multicast MAC addresses， multicast addresses 224.0.1.1 and 238.1.1.1 could not be used together.E、Multicast address 224.0.1.1 has been reserved for the Network Time Protocol （NTP） by the IANAF、The administratively scoped multicast addresses 239.0.0.0 through 239.255.255.255 are similar in purpose to RFC 1918 private unicast addresses.
Which three attributes are carried in a source active message?（）A、NLRI informationB、IP address of originating RPC、address of multicast sourceD、all active RPs in the local domainE、group address to which the source is sending
Which two are characteristics of an IPv6 multicast address？（）A、First （most significant ） octet is FF in hexB、Starts with a prefix of FE80 to FEBF in hexC、Starts with a prefix of FECO to FEFF in hexD、Second octet contains a 4-bit multicast scope fieldE、Last 64 bit contains the modified MAC address of the Ethernet interfaceF、Is allocated from the unicast address space
What is the difference between the IPv6 addresses ::/0 and :: /128? （）A、::/0 is the default route, and ::/128 is the unspecified address.B、::/0 is the unicast address, and ::/128 is the anycast address.C、::/0 is the anycast address, and ::/128 is the multicast address.D、::/0 is the unicast address, and ::/12 8 is the multicast address.E、::/0 is the unspecified address, and ::/128 is the multicast address.F、::/0 is the anycast address, and ::/128 is the default address.
Which three IP multicast group concepts are true?（）A、If a packet is sent to a multicast group address, the multicast frame contains the source multicast address.B、A router does not have to be a member of a multicast group to recei ve multicast data.C、A router must be a member of a multicast group to send to the group.D、A router does not have to be a member of a multicast group to send to the group.E、If a packet is sent to a multicast group address, all members of the multic ast group will receive it.F、A router must be a member of a multicast group to receive multicast data.
Which three IP multicast group concepts are true？ （Choose three.） （）A、 If a packet is sent to a multicast group address， all members of the multicast group will receive itB、 If a packet is sent to a multicast group address， the multicast frame contains the source multicast addressC、 A router does not have to be a member of a multicast group to receive multicast data.D、 A router does not have to be a member of a multicast group to send to the group.E、 A router must be a member of a multicast group to receive multicast data.F、 A router must be a member of a multicast group to send to the group.
Which three IP multicast related statements are true？ （Choose three.） （）A、 Multicast addresses 224.0.1.0 through 238.255.255.255 are called globally scoped addresses. They are used to multicast data between organizations and across the InternetB、 The multicast address 224.0.0.1 is a globally scoped address that has been reserved for the Network Time Protocol （NTP） by the IANAC、 Multicast addresses 239.0.0.0 through 239.255.255.255 are called limited scope addresses. They are constrained to a local group or organizationD、 Multicast addresses 224.0.0.5 and 224.0.0.6 are limited scoped addresses that have been reserved for OSPFE、 Multicast addresses 224.0.0.0 through 224.0.0.255 are used for network protocols on local LAN segments. Because they are always transmitted with a Time to Live （TTL） of 1， they are never forwarded by a router
What are the address Family Identifier （AFI） and subsequent Address family Identifier ASAFI） values from VPNv6？（）A、AFI is 2， SAFI is 128B、AFI is 1， SAFI is 64C、AFI is 2， SAFI is 64D、AFI is 1， SAFI is 96E、AFI is 2， SAFI is 96F、AFI is 1， SAFI is 128
During the IPv6 address resolution， a node sends a neighbor solicitation message in order to discover which of these？（）A、The Layer 2 multicast address of the destination nodeB、The solicited node multicast address of the destination nodeC、The Layer 2 address of the destination node based on the destination IPv6 addressD、The IPv6 address of the destination node based on the destination Layer 2 address
单选题During the IPv6 address resolution， a node sends a neighbor solicitation message in order to discover which of these？（）AThe Layer 2 multicast address of the destination nodeBThe solicited node multicast address of the destination nodeCThe Layer 2 address of the destination node based on the destination IPv6 addressDThe IPv6 address of the destination node based on the destination Layer 2 address
单选题What is the difference between the IPv6 addresses ::/0 and :: /128? （）A::/0 is the default route, and ::/128 is the unspecified address.B::/0 is the unicast address, and ::/128 is the anycast address.C::/0 is the anycast address, and ::/128 is the multicast address.D::/0 is the unicast address, and ::/12 8 is the multicast address.E::/0 is the unspecified address, and ::/128 is the multicast address.F::/0 is the anycast address, and ::/128 is the default address.
单选题During the IPv6 address resolution， a node sends a neighbor solicitation message in order to discover which of these？ （）A The Layer 2 multicast address of the destination nodeB The solicited node multicast address of the destination nodeC The Layer 2 address of the destination node based on the destination IPv6 addressD The IPv6 address of the destination node based on the destination Layer 2 address
单选题When using Overlay Transport Virtualization （OTV）， how do L2 multicast frames traverse the overlay？（）A The L2 multicast frames are encapsulated in an OTV packet using the configured control-group multicast address for transportB The L2 multicast frames are dropped because multicast cannot be carried across the overlay C The L2 multicast frames are encapsulated in an OTV packet using the configured data-group multicast address for transportD The L2 multicast frames are forwarded natively across the overlay based on their multicast IDs
多选题Which three IP multicast group concepts are true？ （Choose three.） （）AIf a packet is sent to a multicast group address， all members of the multicast group will receive itBIf a packet is sent to a multicast group address， the multicast frame contains the source multicast addressCA router does not have to be a member of a multicast group to receive multicast data.DA router does not have to be a member of a multicast group to send to the group.EA router must be a member of a multicast group to receive multicast data.FA router must be a member of a multicast group to send to the group.
单选题Which statement is correct in reference to IPv6 multicast？（）AIPv6 multicast uses Multicast Listener Discovery.BThe first 8 bits of an IPv6 multicast address are always FF （1111 1111）.CIPv6 multicast requires MSDP.DPIM dense mode is not part of IPv6 multicast.
多选题RIPv2 differs from RIPv1 in that：（）Ait uses multicast address 224.0.0.10，instead of broadcastBit uses multicast address 224.0.0.9，instead of broadcastCit can use either multicast or broadcast addresses，instead of just broadcastDit sends incremental updates，instead of periodic updatesEit is classless，instead of classfulFit supports authentication，and RIPv1 does not
多选题Which three IP multicast group concepts are true?（）AIf a packet is sent to a multicast group address, the multicast frame contains the source multicast address.BA router does not have to be a member of a multicast group to receive multicast data.CA router must be a member of a multicast group to send to the group.DA router does not have to be a member of a multicast group to send to the group.EIf a packet is sent to a multicast group address, all members of the multicast group will rece ive it.FA router must be a member of a multicast group to receive multicast data.
单选题What are the address Family Identifier （AFI） and subsequent Address family Identifier ASAFI） values from VPNv6？（）AAFI is 2， SAFI is 128BAFI is 1， SAFI is 64CAFI is 2， SAFI is 64DAFI is 1， SAFI is 96EAFI is 2， SAFI is 96FAFI is 1， SAFI is 128
单选题What is the difference between the IPv6 addresses ：：/0 and ：：/128？（）A：：/0 is the unspecified address， and ：：/128 is the multicast addressB：：/0 is the unicast address， and ：：/128 is the anycast addressC：：/0 is the unicast address， and ：：/128 is the multicast addressD：：/0 is the anycast address， and ：：/128 is the multicast addressE：：/0 is the default route， and ：：/128 is the unspecified addressF：：/0 is the anycast address， and ：：/128 is the default address
多选题In computer networking a multicast address is an identifier for a group of hosts that have joined amulticast group. Multicast addressing can be used in the Link Layer （OSI Layer 2）， such as Ethernet Multicast， as well as at the Internet Layer （OSI Layer 3） as IPv4 or IPv6 Multicast. Whichtwo descriptions are correct regarding multicast addressing？（）AThe first 23 bits of the multicast MAC address are 0x01-00-5E. This is a reserved value thatindicates a multicast applicationBThe last 3 bytes （24 bits） of the multicast MAC address are 0x01-00-5E. This is a reservedvalue that indicates a multicast applicationCTo calculate the Layer 2 multicast address， the host maps the last 23 bits of the IP address intothe last 24 bits of the MAC address. The high-order bit is set to 0DThe first 3 bytes （24 bits） of the multicast MAC address are 0x01-00-5E. This is a reservedvalue that indicates a multicast application
多选题Which three IP multicast group concepts are true?（）AIf a packet is sent to a multicast group address, the multicast frame contains the source multicast address.BA router does not have to be a member of a multicast group to recei ve multicast data.CA router must be a member of a multicast group to send to the group.DA router does not have to be a member of a multicast group to send to the group.EIf a packet is sent to a multicast group address, all members of the multic ast group will receive it.FA router must be a member of a multicast group to receive multicast data.