单选题An administrator has configured a two node cluster， Node1 and Node2 with two resource groups， RG1 andRG2. The resource groups are configured as follows： RG1： Participating Nodes： Node1， Node2 Startup Policy： Online On Home Node Only Fallover Policy： Fallover To Next Priority Node In The List Fallback Policy Never Fallback RG2： Participating Nodes： Node2， Node1 Startup Policy： Online On Home Node Only Fallover Policy： Fallover To Next Priority Node In The List Fallback Policy： Fallback To Higher Priority NodeIn The List An Online on Different Nodes Dependency has been configured as：High Priority Resource Groups： RG2 Intermediate Priority Resource Group： RG1 The cluster has been running without any problems with both resource groups on their home nodes whenNode1 suffers a critical operating system problem causing the node to halt.What is the status of the resource groups？（）（）ARG1 is Online RG2 is OnlineBRG1 is Online RG2 is OfflineCRG1 is Offline RG2 is OnlineDRG1 is Offline RG2 is Offline
单选题
An administrator has configured a two node cluster， Node1 and Node2 with two resource groups， RG1 andRG2. The resource groups are configured as follows： RG1： Participating Nodes： Node1， Node2 Startup Policy： Online On Home Node Only Fallover Policy： Fallover To Next Priority Node In The List Fallback Policy Never Fallback RG2： Participating Nodes： Node2， Node1 Startup Policy： Online On Home Node Only Fallover Policy： Fallover To Next Priority Node In The List Fallback Policy： Fallback To Higher Priority NodeIn The List An Online on Different Nodes Dependency has been configured as：High Priority Resource Groups： RG2 Intermediate Priority Resource Group： RG1 The cluster has been running without any problems with both resource groups on their home nodes whenNode1 suffers a critical operating system problem causing the node to halt.What is the status of the resource groups？（）（）
A
RG1 is Online RG2 is Online
B
RG1 is Online RG2 is Offline
C
RG1 is Offline RG2 is Online
D
RG1 is Offline RG2 is Offline
参考解析
解析：
暂无解析
相关考题：
In a JSRP cluster with two J6350 routers, the interface ge－7／0／0 belongs to which device? () A. This interface is a system-created interface.B. This interface belongs to NODE0 of the cluster.C. This interface belongs to NODE1 of the cluster.D. This interface will not exist because J6350 routers have only six slots.
A customer has a resource group rg1 configured on a two node cluster with the following policies：The customer has observed the following scenarios as nodes join the cluster during cluster start up. Scenario 1 Node1 joins cluster as first node - rg1 is acquired by Node1 Node2 joins cluster as second node - rg1 ismoved from Node1 to Node2 Scenario 2 Node2 joins cluster as first node - rg1 is acquired by Node2 Node1 joins cluster as second node - rg1 remainson Node2 Which of the following is the reason for this behavior？（）A、rg1 is configured with a delayed fallback timerB、Settling time policy has not been configured for rg1C、Node1 does not have sufficient resources to support rg1D、Node2 is the first in the ’Default Node Priority’ list for resource group rg1
An administrator has added an additional network adapter to each cluster node. The adapters have been configured and tested， and the /etc/hosts file has been updated. However，the adapters do not appear in the pick list when the administrator tries to define the adapters to HACMP. What would be required to correct this problem？（） A、 Rerun autodiscovery.B、 Synchronize the cluster.C、 Restart cluster services.D、 Delete and recreate the adapters.
An administrator has configured a two node cluster， Node1 and Node2 with two resource groups， RG1 andRG2. The resource groups are configured as follows： RG1： Participating Nodes： Node1， Node2 Startup Policy： Online On Home Node Only Fallover Policy： Fallover To Next Priority Node In The List Fallback Policy Never Fallback RG2： Participating Nodes： Node2， Node1 Startup Policy： Online On Home Node Only Fallover Policy： Fallover To Next Priority Node In The List Fallback Policy： Fallback To Higher Priority NodeIn The List An Online on Different Nodes Dependency has been configured as：High Priority Resource Groups： RG2 Intermediate Priority Resource Group： RG1 The cluster has been running without any problems with both resource groups on their home nodes whenNode1 suffers a critical operating system problem causing the node to halt.What is the status of the resource groups？（）（）A、RG1 is Online RG2 is OnlineB、RG1 is Online RG2 is OfflineC、RG1 is Offline RG2 is OnlineD、RG1 is Offline RG2 is Offline
An administrator has a 2 node cluster running PowerHA version 5.5. They remove a resource group from theactive cluster configuration. When performing a verify and synchronize of the cluster， the administrator getsthe following error： "migcheck[471]： cl_connect（） error， nodename=Node1， rc=-1 cldare： A communication error prevents obtaining the VRMF from remote nodes. A DARE event cannot be run until this is corrected. Please ensureclcomd is running." What is the most likely cause of this error？（）A、There is a DARE lock in placeB、A PowerHA migration is in progressC、Cluster services is not active on the other nodeD、The other cluster node is running a different version of RSCT
A new administrator is performing fallover testing on a two-node cluster and is concerned that the cascading resource group belonging to Node ’A’ did not reintegrate properly after the cluster was restarted on Node ’A’. A stable cluster is reported by clstat，and clRGinfo reports the resource group online on Node ’B’. What type of configuration would cause this type of behavior？（） A、 The resource group DNP has been configured.B、 The resource group option CWOF has been enabled.C、 The resource group option Inactive Takeover is set.D、 A resource group fallback timer has been configured.
An administrator is notified that a resource group has failed over from the home node， Node1 to a standbynode， Node2 and that Node1 has been powered off. Upon restarting Node1 the administrator checks the AIXerror log and the cluster.log Which of the following is the most likely cause of the failure of Node1？（）A、The operating system crashedB、A disk failure forced a volume group off lineC、The System Resource Controller executed a system haltD、The topology services daemon has crashed due to an ODM mismatch
An enterprise has three nodes： -Node ’A’ is a production database， -Node ’B’ is a production Application server， and -Node ’C’ is a test and development node. Node ’C’ is used by six programmers to develop and the production application as business critical and would like to make it highly available with HACMP. Application development and testing is not business critical. Which of the following describes the best solution？（） A、 There is not an adequate solution because HACMP should not be configured in this environment without a dedicated standby node.B、 Nodes ’A’ and ’B’ should be configured in a cluster with mutual fallover of two cascading resource groups to provide both nodes will deliver acceptable response time with both resource groups.C、 Nodes ’A’ and ’C’ should be configured in one cluster， and Nodes ’B’ and ’C’ in another cluster to prevent both the database and application server from falling over to Node ’C’ at the same time.D、 Nodes ’A’， ’B’， and ’C’ should be configured in a cluster with Node ’C’ the hot standby for both the database and application server resource groups. Workload Manager （WLM） must be configured on database and application developers from over utilizing the CPU resources.
An administrator has a two node cluster， Node1 and Node2， running resource group rg1. The resource groupis active on Node1. The administrator stopped cluster services and unmanaged the resource group on Node1to work on a problem. Now the administrator needs to move rg1 to Node2. Which of the following will achievethis？（）A、Perform a clstart on Node1 with ’Manage Resource Groups’ set to ’Manually’ and select the destination ofNode2B、Perform a resource group move operation from Node1 to Node2 and select the option to ’Re-manageResource Groups’ set to ’Automatically’C、Perform a clstop on Node1 with option to move resource groups， this will release the resource group fromNode1 and accquire the resource group on Node2.D、Perform a clstart on Node1 with ’Manage Resource Groups’ set to ’Automatically’， then perform a resourcegroup move operation to move rg1 from Node1 to Node2
In a JSRP cluster with two J6350 routers, the interface ge-7/0/0 belongs to which device? （）A、This interface is a system-created interface.B、This interface belongs to NODE0 of the cluster.C、This interface belongs to NODE1 of the cluster.D、This interface will not exist because J6350 routers have only six slots.
You work as the IT professional in an international company which is named Wiikigo. You are experiencedin implementing and administering a network operating system. You are specialized in deploying servers，configuring Windows Server 2008 Terminal services and network application services， and configuring aweb services infrastructure. You have two servers that run Windows Server 2008 Enterprise. Both servershave the Failover Clustering feature installed. You have the servers configured as a two-node cluster. Thecluster nodes are named NODE1 and NODE2. You have an application named PrintService that includes aprint spooler resource. You need to configure the cluster to automatically return the PrintService applicationto NODE1 after a failover. Which two actions should you perform？（）A、The Allow Failback and Immediate options should be enabled for the PrintService application.B、The If restart is unsuccessful， failover all resources in this server or application option should bedisabled in the properties of the print spooler resource.C、The Period （hours） option should be set to 0 in the properties of the print spooler resource.D、NODE1 should be moved to the top of the list of preferred owners for the PrintService application.
You are a network administrator for your company. The network contains four Windows Server 2003 computers configured as a four-node server cluster. Each cluster node is the preferred owner of a clustered instance of Microsoft SQL Server 2000， and each cluster node is configured as a possible owner of all other instances of SQL Server. All nodes have identically configured hardware. All four nodes operate at a sustained 70 percent CPU average. You add a server that has identically configured hardware to the cluster as a fifth node. You want each SQL Server instance to continue operating at the same level of performance in the event of a single node failure. What should you do？ （）A、 Clear the Affect group check box in the cluster resource properties for each SQL Server instance.B、 Configure the fifth node as the only possible owner other than the existing preferred owner of the cluster resources that are associated with each SQL Server instance.C、 Configure the fifth node as the preferred owner of each cluster group that contains an SQL Server instance.D、 Enable failback on each group that contains an SQL Server instance.
An administrator was notified that a resource group has failed over from the home node， Node1 to a standbynode， Node2 and that Node1 had been powered off. Upon restarting Node1 the administrator checked the AIXerror log and the cluster.log Which of the following is most likely the cause of the failover？（）A、AIX was shut downB、A fatal corruption occurred in the gsclvmd daemonC、The topsvcs daemon was stopped by the system resource controllerD、The grpsvcs process was stopped by the system resource controller
Company.com has a two-node HACMP cluster with a single cascading resource group. Node ’A’ is the normal production node， and Node ’B’ is the standby node. One of the first steps in the HACMP test plan is to start the cluster and to verify that al elements for the resource group have been acquired. The administrator who is conducting the HACMP test starts the HACMP daemons on Node ’B’ with the ’smitty clstart" command. The administrator notices that Node ’B’ acquires the elements of the resource group， including a service IP labels，a shared volume group， and an application server that has been started. The expectation was that Node ’B’ would enter the cluster in a standby status， rather than acquiring production resources. What should the administrator do to correct this problem？（） A、 Change the cluster to a rotating design.B、 Change the Cascading without Fallback flag to true.C、 Change the Inactive Takeover field to false in the cluster configuration.D、 Nothing should be done. This is the default behavior for cascading resource groups，and node ’A’ should have been started first.
单选题A customer has a resource group rg1 configured on a two node cluster with the following policies：The customer has observed the following scenarios as nodes join the cluster during cluster start up. Scenario 1 Node1 joins cluster as first node - rg1 is acquired by Node1 Node2 joins cluster as second node - rg1 ismoved from Node1 to Node2 Scenario 2 Node2 joins cluster as first node - rg1 is acquired by Node2 Node1 joins cluster as second node - rg1 remainson Node2 Which of the following is the reason for this behavior？（）Arg1 is configured with a delayed fallback timerBSettling time policy has not been configured for rg1CNode1 does not have sufficient resources to support rg1DNode2 is the first in the ’Default Node Priority’ list for resource group rg1
单选题An administrator has configured a two node cluster， Node1 and Node2 with two resource groups， RG1 andRG2. The resource groups are configured as follows： RG1： Participating Nodes： Node1， Node2 Startup Policy： Online On Home Node Only Fallover Policy： Fallover To Next Priority Node In The List Fallback Policy Never Fallback RG2： Participating Nodes： Node2， Node1 Startup Policy： Online On Home Node Only Fallover Policy： Fallover To Next Priority Node In The List Fallback Policy： Fallback To Higher Priority NodeIn The List An Online on Different Nodes Dependency has been configured as：High Priority Resource Groups： RG2 Intermediate Priority Resource Group： RG1 The cluster has been running without any problems with both resource groups on their home nodes whenNode1 suffers a critical operating system problem causing the node to halt.What is the status of the resource groups？（）（）ARG1 is Online RG2 is OnlineBRG1 is Online RG2 is OfflineCRG1 is Offline RG2 is OnlineDRG1 is Offline RG2 is Offline
单选题An administrator is configuring a PowerHA cluster consisting of two nodes across two physical Power systems，570-1 and 570-2. Node1 is an LPAR on 570-1Node2 is an LPAR on 570-2. Dev1 is an LPAR on 570-2 （this LPAR is not part of the cluster）. The cluster will manage a single resource group， RG1， with a single application server， APP1. The resourcegroup will have a home node of Node1. Node1 is configured with 4.0 CPU desired， 0.4 minimum， 4.0 maximum， and 4 virtual processorsNode2 isconfigured with 0.4 CPU desired， 0.4 minimum， 4.0 maximum， and 4 virtual processors Dev1 is configuredwith 4.0 CPU desired， 0.4 minimum， 4.0 maximum， and 4 virtual processors When the resource group RG1 is acquired by Node2 the administrator would like to dynamically move 3.6processor entitlement units from Dev1 to Node2. How could the administrator achieve this in the PowerHAcluster？（）ACreate a custom event script to perform the change to CPU entitlementBModify the extended performance tuning parameters for the cluster to modify CPU entitlement uponresource group acquisitionCCustomize the resource group attributes of RG1 so that the CPU entitlement is modified for Node2 uponresource group acquisitionDCustomize the application server attributes of APP1 so that the CPU entitlement is modified for Node2upon resource group acquisition
单选题A new administrator is performing fallover testing on a two-node cluster and is concerned that the cascading resource group belonging to Node ’A’ did not reintegrate properly after the cluster was restarted on Node ’A’. A stable cluster is reported by clstat，and clRGinfo reports the resource group online on Node ’B’. What type of configuration would cause this type of behavior？（）A The resource group DNP has been configured.B The resource group option CWOF has been enabled.C The resource group option Inactive Takeover is set.D A resource group fallback timer has been configured.
单选题You have a server that runs Windows Server 2008 Enterprise Edition. The server has the FailoverClustering feature installed. The server has three nodes named NODE1， NODE2， and NODE3. The Microsoft Distributed Transaction Coordinator （MSDTC） resource is installed on the cluster. The cluster hasa dedicated cluster group named Group1 that includes the MSDTC resource. You discover that Group1 isunable to failover to NODE3 from NODE1 or NODE2. The failover from NODE1 to NODE2 functionswithout errors. You need to configure Group1 to support the failover between all cluster nodes. What should you do？（）ARemove the MSDTC resource from Group1BSelect NODE3 as a preferred owner for Group1CRemove NODE3 as a possible owner from all cluster resources in Group1DOnfigure NODE3 as a possible owner for all cluster resources in Group1
单选题You have a server that runs Windows Server 2008 Enterprise Edition. The server has the Failover Clustering feature installed. The server has three nodes named NODE1， NODE2， and NODE3. The Microsoft Distributed Transaction Coordinator （MSDTC） resource is installed on the cluster. The cluster has a dedicated cluster group named Group1 that includes the MSDTC resource. You discover that Group1 is unable to failover to NODE3 from NODE1 or NODE2. The failover from NODE1 to NODE2 functions without errors. You need to configure Group1 to support the failover between all cluster nodes. What should you do？（）ARemove the MSDTC resource from Group1.BSelect NODE3 as a preferred owner for Group1.CRemove NODE3 as a possible owner from all cluster resources in Group1.DConfigure NODE3 as a possible owner for all cluster resources in Group1.
单选题An administrator has a 2 node cluster running PowerHA version 5.5. They remove a resource group from theactive cluster configuration. When performing a verify and synchronize of the cluster， the administrator getsthe following error： "migcheck[471]： cl_connect（） error， nodename=Node1， rc=-1 cldare： A communication error prevents obtaining the VRMF from remote nodes. A DARE event cannot be run until this is corrected. Please ensureclcomd is running." What is the most likely cause of this error？（）AThere is a DARE lock in placeBA PowerHA migration is in progressCCluster services is not active on the other nodeDThe other cluster node is running a different version of RSCT
单选题Node ’C’ has just completed reintegration in a three-node cluster. The hacmp.out logifle displays The event node_up_complete for Node ’C’. The cluster administrator wishes to verify that the cluster is stable. In addition to reviewing the cluster log files，what utility should be run to verify the cluster state？（）A clstatB clinfoC cldiagD clverify
单选题The en0 interface on Node1 of a two-node cluster has failed. This adapter is configured with a boot addressand under stable operations also has the service address of the cluster’s single resource group. The resourcegroup is configured with the fallback option. The HA network was configured for IPAT via aliasing and now theservice address is on the en1 interface in the cluster. The en0 interface has already been physically replacedand configured with the boot address. Which of the following will return the cluster to its original state andminimize cluster downtime？（）ARun cluster synchronization.BRestart cluster services on Node1.CPerform a swap_adapter using C-SPOCDRestart cluster services on both nodes
单选题Company.com has a two-node HACMP cluster with a single cascading resource group. Node ’A’ is the normal production node， and Node ’B’ is the standby node. One of the first steps in the HACMP test plan is to start the cluster and to verify that al elements for the resource group have been acquired. The administrator who is conducting the HACMP test starts the HACMP daemons on Node ’B’ with the ’smitty clstart" command. The administrator notices that Node ’B’ acquires the elements of the resource group， including a service IP labels，a shared volume group， and an application server that has been started. The expectation was that Node ’B’ would enter the cluster in a standby status， rather than acquiring production resources. What should the administrator do to correct this problem？（）A Change the cluster to a rotating design.B Change the Cascading without Fallback flag to true.C Change the Inactive Takeover field to false in the cluster configuration.D Nothing should be done. This is the default behavior for cascading resource groups，and node ’A’ should have been started first.
单选题A customer has a resource group rg1 configured on a two node cluster with the following policies：The customer has observed the following scenarios as nodes join the cluster during cluster start up. Scenario 1 Node1 joins cluster as first node - rg1 is acquired by Node1 Node2 joins cluster as second node - rg1 ismoved from Node1 to Node2 Scenario 2 Node2 joins cluster as first node - rg1 is acquired by Node2 Node1 joins cluster as second node - rg1 remainson Node2 Which of the following is the reason for this behavior？（）Arg1 is configured with a delayed fallback timerBSettling time policy has not been configured for rg1CNode1 does not have sufficient resources to support rg1DNode2 is the first in the ’Default Node Priority’ list for resource group rg1
单选题An administrator is notified that a resource group has failed over from the home node， Node1 to a standbynode， Node2 and that Node1 has been powered off. Upon restarting Node1 the administrator checks the AIXerror log and the cluster.log Which of the following is the most likely cause of the failure of Node1？（）AThe operating system crashedBA disk failure forced a volume group off lineCThe System Resource Controller executed a system haltDThe topology services daemon has crashed due to an ODM mismatch
单选题An administrator was notified that a resource group has failed over from the home node， Node1 to a standbynode， Node2 and that Node1 had been powered off. Upon restarting Node1 the administrator checked the AIXerror log and the cluster.log Which of the following is most likely the cause of the failover？（）AAIX was shut downBA fatal corruption occurred in the gsclvmd daemonCThe topsvcs daemon was stopped by the system resource controllerDThe grpsvcs process was stopped by the system resource controller
单选题An administrator has added an additional network adapter to each cluster node. The adapters have been configured and tested， and the /etc/hosts file has been updated. However，the adapters do not appear in the pick list when the administrator tries to define the adapters to HACMP. What would be required to correct this problem？（）A Rerun autodiscovery.B Synchronize the cluster.C Restart cluster services.D Delete and recreate the adapters.