单选题A resource group， MY_APP， has the following configuration： Resource Group NameMY_APP Participating Node Name（s）Alpha Beta GammaStartup Policy Online On Home Node Only Fallover Policy Fallover To Next Priority Node In The List Fallback Policy Fallback To Higher Priority Node InThe List MY_APP is currently running on node Beta. MY_APP is then moved to node Gamma using C-SPOC.Nodes Alpha and Beta are shutdown and restarted. Node Alpha stabilizes approx 60 seconds before nodeBeta. What happens to the resource group， MY_APP， when nodes Alpha and Beta are restarted？（）AIt moves to BetaBIt stays on GammaCIt moves to AlphaDIt moves to Alpha， then to Beta
单选题
A resource group， MY_APP， has the following configuration： Resource Group NameMY_APP Participating Node Name（s）Alpha Beta GammaStartup Policy Online On Home Node Only Fallover Policy Fallover To Next Priority Node In The List Fallback Policy Fallback To Higher Priority Node InThe List MY_APP is currently running on node Beta. MY_APP is then moved to node Gamma using C-SPOC.Nodes Alpha and Beta are shutdown and restarted. Node Alpha stabilizes approx 60 seconds before nodeBeta. What happens to the resource group， MY_APP， when nodes Alpha and Beta are restarted？（）
A
It moves to Beta
B
It stays on Gamma
C
It moves to Alpha
D
It moves to Alpha， then to Beta
参考解析
解析：
暂无解析
相关考题：
Which of the following objects can be directly referenced by a window object? () A. Schedule objectB. Program objectC. Job objectD. Resource planE. Resource consumer group
On router R1， which three of the following protocols will be forwarded to a host specified by the "iphelper-address" interface configuration command if the configuration has not been modified by the"ip forward-protocol udp" global configuration command？（）A、BOOTPB、TFTPC、ARPD、DNSE、proxy-ARPF、FTPG、CDP
In IPCCX, skills can be assigned to which of the following configuration objects?（）A、resources B、Skill Groups C、competence levels D、Resource Groups
A cluster administrator is concerned about using the forced varyon resource group function. Although the function provides increased data availability if it is enabled for a cluster resource group， management is concerned about data integrity. If a varyonvg command fails， an HACMP forced varyon will only occur if which of the following is true？（） A、 A loss of quorum has occurred on one of the disks in the failed volume group.B、 Selective fallover caused by an application moves a resource group to a takeover node.C、 A check is made to ensure at least one complete copy of all data is available in the volume group.D、 The MISSING_PV=TRUE environment variable has been set causing the volume group to be forced online.
The IP subsystem fallover behavior of a two-node cluster is being testing in a large client organization. One of the tests is to simulate a network_down event and verify that HACMP movesthe single resource group to the standby node. What is the best way to simulate a network down condition？（） A、 Turn off the IP core switch connecting the two nodes.B、 Issue the command "stopsrc -g inetd" on the node that has the resource group.C、 Issue the command "sh /etc/rc.tcpclean" on the node that has the resource group.D、 Simultaneously unplug all network cables from the node that has the resource group.
Which of the following is required to ensure the completion of all tests within the automated procedure of thecluster test tool？（）A、Application monitoring has been configuredB、Only disk heartbeat networks have been usedC、Cluster nodes are attached to two IP networksD、Resource Group dependencies have been configured
The resource group configuration for a four node cluster is shown below：Which resource groups will be acquired by node N2 if it joins the cluster first？（）A、rgC、rgEB、rgC、rgDC、rgE、rgB、rgDD、rgC、rgD、rgE
A new administrator is performing fallover testing on a two-node cluster and is concerned that the cascading resource group belonging to Node ’A’ did not reintegrate properly after the cluster was restarted on Node ’A’. A stable cluster is reported by clstat，and clRGinfo reports the resource group online on Node ’B’. What type of configuration would cause this type of behavior？（） A、 The resource group DNP has been configured.B、 The resource group option CWOF has been enabled.C、 The resource group option Inactive Takeover is set.D、 A resource group fallback timer has been configured.
A site administrator is configuring Command-level access control. Which of the following statements about Command-level access control are true？ Command level access control policies： （）A、are mandatoryB、specify action group ExecuteCommandActionGroup for Controller commandsC、specify action group ViewCommandActionGroup for View commandsD、specify resource group ControllerCommandResourceGroup for Controller commandsE、specify resource group ViewCommandResourceGroup for View commands
Which of the following commands will display the extended attributes of a resource group？（）A、cllsattrB、clRGinfoC、clshowresD、cllistres
An administrator is notified that a resource group has failed over from the home node， Node1 to a standbynode， Node2 and that Node1 has been powered off. Upon restarting Node1 the administrator checks the AIXerror log and the cluster.log Which of the following is the most likely cause of the failure of Node1？（）A、The operating system crashedB、A disk failure forced a volume group off lineC、The System Resource Controller executed a system haltD、The topology services daemon has crashed due to an ODM mismatch
An administrator has made several topology and resource group changes on one node in a running cluster.During verification and synchronization， using the "Emulate" option， many errors are reported. Theadministrator decided the best course of action was to roll back the changes. Prior to the changes beingmade， a cluster snapshot was taken. Which of the following actions will roll back the changes with the least disruption？（）A、Perform a synchronization from a node without the changes.B、Apply the cluster snapshot on both nodes while the cluster is running.C、"Restore HACMP Configuration Database from Active Configuration" on the node where the changes weremadeD、Stop the cluster using the option "Unmanage Resource Groups" and apply the cluster snapshot on thenode where the changes were made
A resource group， MY_APP， has the following configuration： Resource Group NameMY_APP Participating Node Name（s）Alpha Beta GammaStartup Policy Online On Home Node Only Fallover Policy Fallover To Next Priority Node In The List Fallback Policy Fallback To Higher Priority Node InThe List MY_APP is currently running on node Beta. MY_APP is then moved to node Gamma using C-SPOC.Nodes Alpha and Beta are shutdown and restarted. Node Alpha stabilizes approx 60 seconds before nodeBeta. What happens to the resource group， MY_APP， when nodes Alpha and Beta are restarted？（）A、It moves to BetaB、It stays on GammaC、It moves to AlphaD、It moves to Alpha， then to Beta
An administrator has a two node cluster， Node1 and Node2， running resource group rg1. The resource groupis active on Node1. The administrator stopped cluster services and unmanaged the resource group on Node1to work on a problem. Now the administrator needs to move rg1 to Node2. Which of the following will achievethis？（）A、Perform a clstart on Node1 with ’Manage Resource Groups’ set to ’Manually’ and select the destination ofNode2B、Perform a resource group move operation from Node1 to Node2 and select the option to ’Re-manageResource Groups’ set to ’Automatically’C、Perform a clstop on Node1 with option to move resource groups， this will release the resource group fromNode1 and accquire the resource group on Node2.D、Perform a clstart on Node1 with ’Manage Resource Groups’ set to ’Automatically’， then perform a resourcegroup move operation to move rg1 from Node1 to Node2
Company.com has a resource group that contains a database that is accessed by a web client based on another system. The communication to the database is TCP/IP. Occasionally after a failure， the end users get unusual error messages that indicate the database server is not available. It has been determined that the web server is trying to access the database server’s information before it has completed file system recovery after a failure. How can HACMP affect this problem？（） A、 HACMP can resequence the order to the starting of the various resource group elements by utilizing Dynamic Node Priority.B、 The order of dependency can be controlled though the HACMP resource group configuration if the web server was made to be part of the HACMP cluster.C、 HACMP can delay making the network label available until after the filesystem checks have completed with the "filesystem mounted before IP is configured".D、 The IP service label can be in a second resource group allowing the sequential processing of resource groups to control when the IP service label is made available.
An enterprise has two nodes： -Node ’A’ runs a large relational database and ha six CPUs and 32GB of memory. -Node ’B’ is an application server with three CPU’s and 16GB of memory. During peak production periods， the CPU load for Node ’A’ is normally between 30% and 40%. For Node ’B’， the CPU load is 10% to 20% during peak production periods. Which of the following describes the best solution for an HACMP cluster？（） A、 Two cluster with two resource groups in a mutual takeover configuration.B、 One cluster with two cascading resource groups in a mutual takeover configuration.C、 One cluster with two rotating resource groups in a one-sided hot standby configuration.D、 Two clusters with two resource groups in a hot-standby configuration with a newly acquired third node.
Which of the following objects can be directly referenced by a window object？（）A、 Schedule objectB、 Program objectC、 Job objectD、 Resource planE、 Resource consumer group
Which of the following tools are used to apply a Security Template in Windows Server 2012 R2？（）A、Integration ServicesB、Security Configuration and AnalysisC、Resultant Set of PolicyD、TS ManagerE、Resource meteringF、Active Directory Domains and Trusts
An administrator was notified that a resource group has failed over from the home node， Node1 to a standbynode， Node2 and that Node1 had been powered off. Upon restarting Node1 the administrator checked the AIXerror log and the cluster.log Which of the following is most likely the cause of the failover？（）A、AIX was shut downB、A fatal corruption occurred in the gsclvmd daemonC、The topsvcs daemon was stopped by the system resource controllerD、The grpsvcs process was stopped by the system resource controller
Company.com has a two-node HACMP cluster with a single cascading resource group. Node ’A’ is the normal production node， and Node ’B’ is the standby node. One of the first steps in the HACMP test plan is to start the cluster and to verify that al elements for the resource group have been acquired. The administrator who is conducting the HACMP test starts the HACMP daemons on Node ’B’ with the ’smitty clstart" command. The administrator notices that Node ’B’ acquires the elements of the resource group， including a service IP labels，a shared volume group， and an application server that has been started. The expectation was that Node ’B’ would enter the cluster in a standby status， rather than acquiring production resources. What should the administrator do to correct this problem？（） A、 Change the cluster to a rotating design.B、 Change the Cascading without Fallback flag to true.C、 Change the Inactive Takeover field to false in the cluster configuration.D、 Nothing should be done. This is the default behavior for cascading resource groups，and node ’A’ should have been started first.
单选题A new administrator is performing fallover testing on a two-node cluster and is concerned that the cascading resource group belonging to Node ’A’ did not reintegrate properly after the cluster was restarted on Node ’A’. A stable cluster is reported by clstat，and clRGinfo reports the resource group online on Node ’B’. What type of configuration would cause this type of behavior？（）A The resource group DNP has been configured.B The resource group option CWOF has been enabled.C The resource group option Inactive Takeover is set.D A resource group fallback timer has been configured.
单选题You want to create a consumer group， GROUP1， and you execute the following command in the command-line interface： SQL EXEC DBMS_RESOURCE_MANAGER.CREATE_CONSUMER_GROUP （CONSUMER_GROUP =’group1’， COMMENT = ’New Group’）； This command errorsout displaying the following message： ERROR at line 1： ORA-01031： insufficient privileges ORA-06512： at "SYS.DBMS_RMIN"， line 115 ORA-06512： at SYS.DBMS_RESOURCE_MANAGER"， line 108 ORA-06512： at line 1 What action would you take to overcome this error？（）A grant SYSDBA to the userB grant SYSOPER to the userC grant the RESOURCE role to the userD use the GRANT command to grant the ADMINISTER_RESOURCE_MANAGER privilege to the useE grant the ADMINISTER_RESOURCE_MANAGER privilege to the user by using the DBMS_RESOURCE_MANAGER_PRIVS package
单选题You want to create a consumer group， GROUP1， and you execute the following command in the command/x7fline interface： SQL EXEC DBMS_RESOURCE_MANAGER.CREATE_CONSUMER_GROUP （CONSUMER_GROUP =’group1’， COMMENT = ’New Group’）; This command errors out displaying the following message： ERROR at line 1： ORA/x7f01031： insufficient privileges ORA/x7f06512： at "SYS.DBMS_RMIN"， line 115 ORA/x7f06512： at SYS.DBMS_RESOURCE_MANAGER"， line 108 ORA/x7f06512： at line 1 What action would you take to overcome this error？（）Agrant SYSDBA to the userBgrant SYSOPER to the userCgrant the RESOURCE role to the userDuse the GRANT command to grant the ADMINISTER_RESOURCE_MANAGER privilege to the userEgrant the ADMINISTER_RESOURCE_MANAGER privilege to the user by using the DBMS_RESOURCE_MANAGER_PRIVS package
多选题On router R1， which three of the following protocols will be forwarded to a host specified by the "iphelper-address" interface configuration command if the configuration has not been modified by the"ip forward-protocol udp" global configuration command？（）ABOOTPBTFTPCARPDDNSEproxy-ARPFFTPGCDP
单选题The IP subsystem fallover behavior of a two-node cluster is being testing in a large client organization. One of the tests is to simulate a network_down event and verify that HACMP movesthe single resource group to the standby node. What is the best way to simulate a network down condition？（）A Turn off the IP core switch connecting the two nodes.B Issue the command stopsrc -g inetd on the node that has the resource group.C Issue the command sh /etc/rc.tcpclean on the node that has the resource group.D Simultaneously unplug all network cables from the node that has the resource group.
单选题Company.com has a two-node HACMP cluster with a single cascading resource group. Node ’A’ is the normal production node， and Node ’B’ is the standby node. One of the first steps in the HACMP test plan is to start the cluster and to verify that al elements for the resource group have been acquired. The administrator who is conducting the HACMP test starts the HACMP daemons on Node ’B’ with the ’smitty clstart" command. The administrator notices that Node ’B’ acquires the elements of the resource group， including a service IP labels，a shared volume group， and an application server that has been started. The expectation was that Node ’B’ would enter the cluster in a standby status， rather than acquiring production resources. What should the administrator do to correct this problem？（）A Change the cluster to a rotating design.B Change the Cascading without Fallback flag to true.C Change the Inactive Takeover field to false in the cluster configuration.D Nothing should be done. This is the default behavior for cascading resource groups，and node ’A’ should have been started first.
单选题An administrator is notified that a resource group has failed over from the home node， Node1 to a standbynode， Node2 and that Node1 has been powered off. Upon restarting Node1 the administrator checks the AIXerror log and the cluster.log Which of the following is the most likely cause of the failure of Node1？（）AThe operating system crashedBA disk failure forced a volume group off lineCThe System Resource Controller executed a system haltDThe topology services daemon has crashed due to an ODM mismatch