多选题The Company switches have all been upgraded to use VTP version 2. What are two benefits provided in VTP Version 2 that are not available in VTP Version 1？（）AVTP version 2 supports Token Ring VLANsBVTP version 2 allows VLAN consistency checksCVTP version 2 allows active redundant links when used with spanning treeDVTP version 2 reduces the amount of configuration necessaryEVTP version 2 saves VLAN configuration memory
多选题
The Company switches have all been upgraded to use VTP version 2. What are two benefits provided in VTP Version 2 that are not available in VTP Version 1？（）
A
VTP version 2 supports Token Ring VLANs
B
VTP version 2 allows VLAN consistency checks
C
VTP version 2 allows active redundant links when used with spanning tree
D
VTP version 2 reduces the amount of configuration necessary
E
VTP version 2 saves VLAN configuration memory
参考解析
解析：
暂无解析
相关考题：
What must the Ezonexam network administrator do in order to successfully configure a VLAN trunk between two switches named VE1 and VE2? (Select two answer choices)A. Set each end of the trunk line to IEEE 802.1Q encapsulation.B. Set the same VTP management domain name on both switches.C. Set all ports on the two switched as access ports.D. Configure one of the two switches as a VTP server.E. Connect the two switches using a rollover cable.F. Use a router to forward VTP traffic between the VLANs.
A new switch is being installed in the Ezonexam network and you have been assigned the task of connecting it to an existing switch. In doing this, you want to set up the VLAN Trunking Protocol so that VLAN information can be passed between the switches. Which of the following must you do to accomplish this? (Choose all that apply).A．You must set each end of the trunk line to IEEE 802.1e encapsulation.B．You must set the same VTP management domain name on both switches.C．You must set all ports on the two switches as access ports.D．You must configure one of the switches as a VTP server.E．You must use a rollover cable to connect the two switches.
A new switch is installed in the Ezonexam network. This switch is to be configured so that VLAN information will be automatically distributed to all the other Cisco Catalyst switches in the network.Which of the conditions below have to be met in order for this to occur? (Choose all that apply).A. The switch that will share the VLAN information must be in the VTP Server mode.B. The switches must be in the same VTP domain.C. The switch that will share the VLAN information must be configured as the root bridge.D. The switches must be configured to use the same VTP version.E. The switches must be configured to use the same STP version.F. The switches must be configured to use the same type of ID tagging.G. The switches must be connected over VLAN trunks.
When is a switched network that is running the Spanning Tree Protocol considered to be fully converged?A．when all switches have the same BID as the root switchB．when all switches have received the MAC address of each neighboring switchC．when every enabled switch port has been assigned a unique identifierD．when every operating switch port is in either the blocking or forwarding stateE．when all switches are in either client, server, or transparent mode
What must an administrator do in order to successfully configure a VLAN trunk between two switches?() A. Set each end of the trunk line to IEEE 802.1Q encapsulation.B. Set the same VTP management domain name on both switches.C. Set all ports on the two switched as access ports.D. Configure one of the two switches as a VTP server.E. Connect the two switches using a rollover cable.F. Use a router to forward VTP traffic between the VLANs.
You are using VTP version 2 in your network to transport VLAN information between switches. When adding a switch to the network that has been used in the lab previously， you notice that a lot of the existingVLANs have been deleted or replaced with other names. What can you do to prevent this from happeningin the future， without losing all VTP features that you are using today？（）A、configure a hard-to-guess VTP domain nameB、use a hard-to-guess VTP passwordC、use VTP transparent modeD、implement VTP version 3
What are two important guidelines to follow when implementing VTP？（）A、 CDPmust be enabled on all switches in theVTP management domain.B、 All switches in the VTPdomain must run the same version of VTP.C、 When using secure mode VTP， only configure management domain passwords onVTP servers.D、 EnablingVTP pruning on a server willenable the feature for the entire management domain.E、 Use of theVTPmulti-domain feature should be restricted to migration and temporary implementation.
You need to investigate a VTP problem between two Company switches. The lack of which two prevents VTP information from propagating between switches？（）A、A root VTP serverB、A trunk portC、VTP priorityD、VLAN 1E、None of the other alternatives apply
A switch that is to be added to the production network has been preconfigured （trunks， VLANs， VTP， and STP） and was tested in your lab. After installing the switch into the network， the entire network went down. What might explain what happened？ （）A、The new switch happened to be running Cisco Catalyst operating system， while the other network switches were running Cisco IOS Software.B、The configuration revision of the new switch was higher than the configuration revision of the production VTP domain.C、The link costs on the new switch are set to a high value， causing all ports on the new switch to go into a forwarding mode and none into blocking mode， thereby causing a spanning-tree loop.D、The ports connecting to the two switches have been configured incorrectly. One side has the command switchport mode access and the other switchport mode trunk.
New switches have been purchased for a network upgrade. The objective for the network design emphasizes efficient, error-free transport instead of fast transport.Which switching mode should be configured on the new switches to provide error-free transport to the network? （）A、cut-throughB、fragment-freeC、frame-filteringD、store-and-forwardE、802.1q forwardingF、VTP transparent mode
The Company switches are configured to use VTP. What’s true about the VLAN trunking protocol （VTP）？（）A、VTP messages will not be forwarded over nontrunk links.B、VTP domain names need to be identical. However，case doesn’t matter.C、A VTP enabled device which receives multiple advertisements will ignore advertisements with higher configuration revision numbers.D、A device in "transparent" VTP v.1 mode will not forward VTP messages.E、VTP pruning allows switches to prune VLANs that do not have any active ports associated with them.
What must an administrator do in order to successfully configure a VLAN trunk between two switches?（）A、Set each end of the trunk line to IEEE 802.1Q encapsulation.B、Set the same VTP management domain name on both switches.C、Set all ports on the two switched as access ports.D、Configure one of the two switches as a VTP server.E、Connect the two switches using a rollover cable.F、Use a router to forward VTP traffic between the VLANs.
An administrator is configuring a Catalyst switch with VLAN information that must be automatically distributed to other Catalyst switches in the network. What conditions must be met in order for the VLANs configured on this switch to be automatically configured on the other switches?（）A、The switch that will share its VLAN configuration must be in VTP server mode.B、The switches must be in the same VTP domain.C、The switch that will share the VLAN information must be configured as the root bridge.D、The switches must be connected over VLAN trunks.E、The switches must be configured to use the same STP version.F、The switches must have VTP pruning activated.
A new switch is installed in the Testking network. This switch is to be configured sothat VLAN information will be automatically distributed to all the other Cisco Catalyst switches in the network. Which of the conditions below have to be met in order for this to occur?（）A、The switch that will share the VLAN information must be in the VTP Server mode.B、The switches must be in the same VTP domain.C、The switch that will share the VLAN information must be configured as the root bridge.D、The switches must be configured to use the same VTP version.E、The switches must be configured to use the same STP version.F、The switches must be configured to use the same type of ID tagging.G、The switches must be connected over VLAN trunks.
The Company switches have all been upgraded to use VTP version 2. What are two benefits provided in VTP Version 2 that are not available in VTP Version 1？（）A、VTP version 2 supports Token Ring VLANsB、VTP version 2 allows VLAN consistency checksC、VTP version 2 allows active redundant links when used with spanning treeD、VTP version 2 reduces the amount of configuration necessaryE、VTP version 2 saves VLAN configuration memory
Two Company switches are connected via a trunk using VTP. Which VTP information does a Catalyst switch advertise on its trunk ports when using VTP？（）A、STP root statusB、VTP modeC、Negotiation statusD、Management domainE、Configuration revision number
A network administrator is explaining VTP configuration to a new technician. What should the network administrator tell the new technician about VTP configuration?（）A、A switch in the VTP client mode cannot update its local VLAN database.B、A trunk link must be configured between the switches to forward VTP updates.C、A switch in the VTP server mode can update a switch in the VTP transparent mode.D、A switch in the VTP transparent mode will forward updates that it receives to other switches.E、A switch in the VTP server mode only updates switches in the VTP client mode that have a higher VTP revision number.F、A switch in the VTP server mode will update switches in the VTP client mode regardless of the configured VTP domain membership.
A new switch is being installed and you have been assigned the task of connecting it to an existing switch. In doing this, you want to set up the VLAN Trunking Protocol so that VLAN information can be passed between the switches. Which of the following must you do to accomplish this?（）A、You must set each end of the trunk line to IEEE 802.1e encapsulation.B、You must set the same VTP management domain name on both switches.C、You must set all ports on the two switches as access ports.D、You must configure one of the switches as a VTP server.E、You must use a rollover cable to connect the two switches.
多选题An administrator is configuring a Catalyst switch with VLAN information that must be automatically distributed to other Catalyst switches in the network. What conditions must be met in order for the VLANs configured on this switch to be automatically configured on the other switches?（）AThe switch that will share its VLAN configuration must be in VTP server mode.BThe switches must be in the same VTP domain.CThe switch that will share the VLAN information must be configured as the root bridge.DThe switches must be connected over VLAN trunks.EThe switches must be configured to use the same STP version.FThe switches must have VTP pruning activated.
单选题You work as a network Exchange administrator at Company.com.The Company.com network currently consists of a single Active Directory forest named Company.com containing three sites named KingSite1， KingSite2 and KingSite3.The Company.com organization makes use of Microsoft Exchange Server 2007 Service Pack 1 （SP1） as their messaging solution.Company.com has additionally configured each site with two Client Access server， Mailbox server and Hub Transport Server.During the course of the business week you receive instruction from Company.com to install Microsoft Exchange Server 2010 in KingSite1 whilst ensuring that you use the least amount of administrative effort.What should you do？（）AYou should consider having all Exchange servers in the organization upgraded to Microsoft Exchange Server 2007 Service Pack 2 （SP2）.BYou should consider having all Exchange servers in KingSite1 and all Client Access servers in the organization upgraded to Microsoft Exchange Server 2007 Service Pack 2 （SP2）.CYou should consider having all Client Access servers in the organization upgraded to Microsoft Exchange Server 2007 ServicePack 2 （SP2）DYou should consider having all Exchange servers in KingSite1 upgraded to Microsoft Exchange Server 2007 ServicePack 2 （SP2）.
单选题When is a switched network that is running the Spanning Tree Protocol considered to be fully converged?（）Awhen all switches have the same BID as the root switchBwhen all switches have received the MAC address of each neighboring switchCwhen every enabled switch port has been assigned a unique identifierDwhen every operating switch port is in either the blocking or forwarding stateEwhen all switches are in either client, server, or transparent mode
多选题What must an administrator do in order to successfully configure a VLAN trunk between two switches?（）ASet each end of the trunk line to IEEE 802.1Q encapsulation.BSet the same VTP management domain name on both switches.CSet all ports on the two switched as access ports.DConfigure one of the two switches as a VTP server.EConnect the two switches using a rollover cable.FUse a router to forward VTP traffic between the VLANs.
多选题Two Company switches are connected via a trunk using VTP. Which VTP information does a Catalyst switch advertise on its trunk ports when using VTP？（）ASTP root statusBVTP modeCNegotiation statusDManagement domainEConfiguration revision number
单选题You are using VTP version 2 in your network to transport VLAN information between switches. When adding a switch to the network that has been used in the lab previously， you notice that a lot of the existingVLANs have been deleted or replaced with other names. What can you do to prevent this from happeningin the future， without losing all VTP features that you are using today？（）Aconfigure a hard-to-guess VTP domain nameBuse a hard-to-guess VTP passwordCuse VTP transparent modeDimplement VTP version 3
多选题VTP switches use advertisements to exchange information with each other. Which of the following advertisement types are associated with VTP？（）ADomain advertisementsBAdvertisement requests from clientsCSubset advertisementsDSummary advertisements
多选题The Company switches are configured to use VTP. What’s true about the VLAN trunking protocol （VTP）？（）AVTP messages will not be forwarded over nontrunk links.BVTP domain names need to be identical. However，case doesn’t matter.CA VTP enabled device which receives multiple advertisements will ignore advertisements with higher configuration revision numbers.DA device in transparent VTP v.1 mode will not forward VTP messages.EVTP pruning allows switches to prune VLANs that do not have any active ports associated with them.
多选题You need to investigate a VTP problem between two Company switches. The lack of which two prevents VTP information from propagating between switches？（）AA root VTP serverBA trunk portCVTP priorityDVLAN 1ENone of the other alternatives apply