单选题A technician is troubleshooting a WLAN card in a laptop. The wireless infrastructure is 802.11g. The WLAN card is showing connected at 11Mbps. Which of the following would be the BEST reason why the WLAN card is performing at that speed?()AThe WLAN card is 802.11g.BThe WLAN card is 802.11b.CThe WLAN card is 802.11n.DThe WLAN card is 802.11a.

单选题
A technician is troubleshooting a WLAN card in a laptop. The wireless infrastructure is 802.11g. The WLAN card is showing connected at 11Mbps. Which of the following would be the BEST reason why the WLAN card is performing at that speed?()
A

The WLAN card is 802.11g.

B

The WLAN card is 802.11b.

C

The WLAN card is 802.11n.

D

The WLAN card is 802.11a.


参考解析

解析: 暂无解析

相关考题:

After a technician replaces a laptop display, the technician now notices that the wireless no longer works. Which of the following would be the MOST likely cause?() A. The wireless switch was damaged during the display installation.B. The network card has failed.C. The new display is interfering with the wireless signal.D. The antenna connector was not reconnected.

After swapping an internal wireless card on a laptop with an identical model, the technician notices that the wireless does not work. Which of the following would be the MOST likely cause?() A. Antennae is not connectedB. Wireless card is defectiveC. Drivers needs to be updatedD. OS needs to be updated

A wireless client cannot connect to an 802.11b/g BSS with a b/g wireless card. The client section of the access point does not list any active WLAN clients. What is a possible reason for this?() A. The incorrect channel is configured on the client.B. The client‘s IP address is on the wrong subnet.C. The client has an incorrect pre-shared key.D. The SSID is configured incorrectly on the client.

Which two WLAN implementation statements are true?()A、An autonomous wireless solution includes lightweight APs and WLAN controllers. The APs and the WLAN controllers are managed by a WLAN solution engine (WLSE/WLSM).B、An autonomous wireless solution includes lightweight APs and WLAN controllers. The APs and the WLAN controllers are managed by the Cisco Wireless Control System (WCS).C、A lightweight wireless solution includes lightweight APs and WLAN controllers. The APs and the WLAN controllers are managed by a WLAN solution engine (WLSE/WLSM).D、A lightweight wireless solution consists of autonomous access points (APs), which are managed by a WLAN solution engine (WLSE/WLSM).E、A lightweight wireless solution includes lightweight APs and WLAN controllers. The APs and the WLAN controllers are managed by the Cisco Wireless Control System (WCS).

Which explanation describes a wireless client IGMP multicast join request using a Cisco Unified Wireless Network v5.2 architecture of AP to WLAN controller?()A、passed by the AP to its connected switch and then forwarded directly to the connected router,which creates an MGID table entryB、passed by the AP to the WLAN controller and then forwarded to the source PIM-enabled router,which creates an MGID table entryC、passed by the AP to the WLAN controller, which creates an MGID table entry before forwarding to the directly connected PIM-enabled routerD、passed by the AP to its connected switch and then forwarded to the rendezvous point router,which creates an MGID table entry

Which of the following expansion slots would be BEST for a fiber network card?()A、 ISAB、 PCIxC、 PCIeD、 AGP

After a technician replaces a laptop display, the technician now notices that the wireless no longer works. Which of the following would be the MOST likely cause?()A、The wireless switch was damaged during the display installation.B、The network card has failed.C、The new display is interfering with the wireless signal.D、The antenna connector was not reconnected.

A technician is trying to install a previous-generation expansion card into their new laptop.However, the card refuses to fit into the expansion slot. Which of the following is MOST likely the reason?()A、The card needs to have the compatibility jumpers set before it can be installed into the system.B、The card is a PCI Express card and the laptop supports pcmica.C、The expansion slot needs to be enabled in theblos first.D、The card is a PCMCIA card and the laptop supports PCI Express cards.

As the Company wireless administrator, you required to be knowledgeable about the wireless LAN  components.  Which two statements about these components are true? ()A、 In the autonomous access point solution, control is provided by the WLAN controller.B、 In the lightweight access point solution, WLAN management is provided by the WLAN Control  System (WCS).C、 In the autonomous access point solution, control is provided by the WDS (Wireless Domain  Services).D、 Cisco Aironet autonomous access points cannot be supported by the Cisco Unified Wireless  Network.E、 Ii the lightweight access point solution, WLAN management is provided by the WLAN Solution  Engine (WLSE).F、 Cisco Aironet lightweight access points cannot be supported by the Cisco Unified Wireless  Network.

A technician is troubleshooting a WLAN card in a laptop. The wireless infrastructure is 802.11g. TheWLAN card is showing connected at 11Mbps. Which of the following would be the BEST reason why theWLAN card is performing at that speed? ()A、The WLAN card is 802.11g.B、The WLAN card is 802.11b.C、The WLAN card is 802.11n.D、The WLAN card is 802.11a.

After swapping an internal wireless card on a laptop with an identical model, the technician notices that the wireless does not work. Which of the following would be the MOST likely cause?()A、Antennae is not connectedB、Wireless card is defectiveC、Drivers needs to be updatedD、OS needs to be updated

A technician is troubleshooting a WLAN card in a laptop. The wireless infrastructure is 802.11g. The WLAN card is showing connected at 11Mbps. Which of the following would be the BEST reason why the WLAN card is performing at that speed?() A、The WLAN card is 802.11g.B、The WLAN card is 802.11b.C、The WLAN card is 802.11n.D、The WLAN card is 802.11a.

While performing a preventative maintenance check on a personal computer, a technician notices thatseveralunused expansion card slots have open ports. Which of the following BEST describes why the covers for these card slots should be reinstalled?()A、Help limit radio frequency interference (RFI) inside the case.B、Help ensure proper air flow through the case.C、Help prevent moisture buildup in the case.D、Help limit electrostatic discharge (ESD) inside the case.

单选题A wireless client cannot connect to an 802.11b/g BSS with a b/g wireless carD.The client section of the access point does not list any active WLAN clients. What is a possible reason for this?()AThe incorrect channel is configured on the client.BThe client's IP address is on the wrong subnet.CThe client has an incorrect pre-shared key.DThe SSID is configured incorrectly on the client.

单选题A laptop will not output to a connected projector. Which of the following steps should a technician take FIRST?()APress the appropriate function + monitor key.BAdjust the BIOS settings for external display.CReplace the video card on the laptop.DUpdate video drivers for the video card.

多选题Which two WLAN implementation statements are true?()AAn autonomous wireless solution includes lightweight APs and WLAN controllers. The APs and the WLAN controllers are managed by a WLAN solution engine (WLSE/WLSM).BAn autonomous wireless solution includes lightweight APs and WLAN controllers. The APs and the WLAN controllers are managed by the Cisco Wireless Control System (WCS).CA lightweight wireless solution includes lightweight APs and WLAN controllers. The APs and the WLAN controllers are managed by a WLAN solution engine (WLSE/WLSM).DA lightweight wireless solution consists of autonomous access points (APs), which are managed by a WLAN solution engine (WLSE/WLSM).EA lightweight wireless solution includes lightweight APs and WLAN controllers. The APs and the WLAN controllers are managed by the Cisco Wireless Control System (WCS).

单选题A technician has replaced a video card with another manufacturer’s video card. The driverinstallation does not complete. Which of the following steps should the technician take FIRST?()ARoll back the driver.BInstall the original video card and reboot.CDelete the monitor.DRemove the video card and reboot.

单选题A user replaces a laptop’s wireless PCMCIA card with a different vendor’s card. All of the new card configuration steps have been followed. The OS sees all known wireless networks but cannot connect to the user’s network. Which of the following is the MOST likely reason for this behavior?()ADMZ is enabled.BMAC filtering is enabled.CWEP is being used.DSSID broadcast is disabled.

单选题After swapping an internal wireless card on a laptop with an identical model, the technician notices that the wireless does not work. Which of the following would be the MOST likely cause?()AAntennae is not connectedBWireless card is defectiveCDrivers needs to be updatedDOS needs to be updated

单选题A technician is troubleshooting a WLAN card in a laptop. The wireless infrastructure is 802.11g. The WLAN card is showing connected at 11Mbps. Which of the following would be the BEST reason why the WLAN card is performing at that speed?()AThe WLAN card is 802.11g.BThe WLAN card is 802.11b.CThe WLAN card is 802.11n.DThe WLAN card is 802.11a.

单选题A technician is trying to install a previous-generation expansion card into their new laptop.However, the card refuses to fit into the expansion slot. Which of the following is MOST likely the reason?()AThe card needs to have the compatibility jumpers set before it can be installed into the system.BThe card is a PCI Express card and the laptop supports pcmica.CThe expansion slot needs to be enabled in theblos first.DThe card is a PCMCIA card and the laptop supports PCI Express cards.

单选题Which explanation describes a wireless client IGMP multicast join request using a Cisco Unified Wireless Network v5.2 architecture of AP to WLAN controller?()Apassed by the AP to its connected switch and then forwarded directly to the connected router,which creates an MGID table entryBpassed by the AP to the WLAN controller and then forwarded to the source PIM-enabled router,which creates an MGID table entryCpassed by the AP to the WLAN controller, which creates an MGID table entry before forwarding to the directly connected PIM-enabled routerDpassed by the AP to its connected switch and then forwarded to the rendezvous point router,which creates an MGID table entry

单选题While performing a preventative maintenance check on a personal computer, a technician notices thatseveralunused expansion card slots have open ports. Which of the following BEST describes why the covers for these card slots should be reinstalled?()AHelp limit radio frequency interference (RFI) inside the case.BHelp ensure proper air flow through the case.CHelp prevent moisture buildup in the case.DHelp limit electrostatic discharge (ESD) inside the case.

单选题What is recommended for a wireless LAN infrastructure configuration when using SVP-version SpectraLink phones?()ADisable DTPC on the radio.BDisable higher data rates on the radio.CDisable WMM policy on the WLAN.DDisable multicast on the WLAN.

单选题A technician is troubleshooting a WLAN card in a laptop. The wireless infrastructure is 802.11g. The WLAN card is showing connected at 11Mbps. Which of the following would be the BEST reason why the WLAN card is performing at that speed?()AThe WLAN card is 802.11g.BThe WLAN card is 802.11b.CThe WLAN card is 802.11n.DThe WLAN card is 802.11a.

单选题After a technician replaces a laptop display, the technician now notices that the wireless no longer works. Which of the following would be the MOST likely cause?()AThe wireless switch was damaged during the display installation.BThe network card has failed.CThe new display is interfering with the wireless signal.DThe antenna connector was not reconnected.

单选题A technician is troubleshooting a WLAN card in a laptop. The wireless infrastructure is 802.11g. TheWLAN card is showing connected at 11Mbps. Which of the following would be the BEST reason why theWLAN card is performing at that speed? ()AThe WLAN card is 802.11g.BThe WLAN card is 802.11b.CThe WLAN card is 802.11n.DThe WLAN card is 802.11a.

单选题Which of the following expansion slots would be BEST for a fiber network card?()A ISAB PCIxC PCIeD AGP