单选题What is the correct procedure to update the UEFI on HX5 with MAX5 blades without using the AMM?（）AInsert the ServerGuide CD/DVD, boot the HX5 blade and follow the prompts BBoot the blade from the HX5 Bootable Media Creator (BoMC) and follow the prompts CPress F1 when the HX5 system is booting, select Update UEFI, insert the CD/DVD and select OKDMount the IMM virtual disk
单选题
What is the correct procedure to update the UEFI on HX5 with MAX5 blades without using the AMM?（）
A
Insert the ServerGuide CD/DVD, boot the HX5 blade and follow the prompts
B
Boot the blade from the HX5 Bootable Media Creator (BoMC) and follow the prompts
C
Press F1 when the HX5 system is booting, select Update UEFI, insert the CD/DVD and select OK
D
Mount the IMM virtual disk
参考解析
解析：
暂无解析
相关考题：
A manufacturing customer has an IBM BladeCenter H chassis with four， HX5 with MAX5 4-socket blades installed. Each blade has the optional Fibre Channel Expansion card. The customer wants redundancy and is going to install the following configuration： （1）two Brocade 20-Port SAN Switch Modules （2）two Nortel Networks 1/10 GB Uplink ESM （3）a redundant AMM What is the minimum number of power supplies needed for this configuration to have full redundancy？（）A、4B、3C、2D、8
A banking customer plans to implement a BladeCenter H chassis. They plan for seven HS22 blades， six HX5 blades with MAX5， one 1U external Fibre Channel switch， and two 3U Fibre Channel storage devices with fourteen 146GB drives. Which is the minimum amount of rack space required to implement the solution of the following？（）A、32UB、21UC、25UD、22U
A customer asks the sales professional how to update the UEFI on the HX5. They do not want to use AMM. Which is the procedure of the following？（）A、InstallServerGuide CD/DVD,boot the HX5 blade and follow the promptsB、Boot the blade from the HX5 Bootable Media Creator （BoMC） and follow the promptsC、Press F1 while the HX5 is booting，incert the CD/DVD and select "OK"D、Mount the IMM virtual disk
Which of the following Blade servers offer hot swap internal hard drives？（）A、HS21B、HS22C、HS22VD、HX5
A blade server has been configured to boot from SAN. After an HBA firmware upgrade the blade was rebooted and cannot find the operating system. Which of the following should the administrator do NEXT to troubleshoot the issue？（）A、Verify all HBA settings.B、Upgrade the blade firmware.C、Upgrade the OS level HBA drivers.D、Set the system to boot from the local disk.
What is the correct procedure to update the UEFI on HX5 with MAX5 blades without using the AMM?（）A、Insert the ServerGuide CD/DVD, boot the HX5 blade and follow the prompts B、Boot the blade from the HX5 Bootable Media Creator (BoMC) and follow the prompts C、Press F1 when the HX5 system is booting, select Update UEFI, insert the CD/DVD and select OKD、Mount the IMM virtual disk
During system boot， the system hangs at LED 0C31. What is the first step the system administrator should take to correct the problem？（）A、Check system console connectionsB、Check system network connectionsC、Boot in service mode and change the bootlistD、Boot from the AIX installation media and mount rootvg filesystems
A customer wants to boot from an iSCSI SAN with their IBM BladeCenter infrastructure running Microsoft Windows Server 2000. What is required for the customer to be able to perform this？（）A、Fibre Channel Expansion Card for each Blade ServerB、cKVM Card for each Blade ServerC、iSCSI Expansion Card for each Blade ServerD、4Gb Modular Flash Drive
A customer has the following equipment installed in their data center： （1）an IBM BladeCenter H chassis （2）two power supplies （3）six HS22V blades （4）three Nortel 1/10 GB ESMs The retail customer purchased a new HX5 with MAX5. Which of the following must be added to install the HX5 with MAX5？（）A、Two additional power suppliesB、Fibre Channel （FC） switches and SAN storageC、A Nortel 1/10 GB ESMD、SSD for the HX5
Which of the following is the correct procedure to update the BIOS on LS42 blades without using the AMM?（）A、Insert the Update eXpress Service Pack Installer (UXSPI) CD, boot the LS42 blade and follow the prompts B、Boot the blade to the Bootable Media Creator (BoMC) CD and follow the prompts C、Press F1 when the LS42 system is booting, select Update BIOS, insert the diskette into the diskette drive, and select OK D、Use the Remote Supervisor Adapter virtual disk
Customer requests a HX5 blade but his application may demand more than its 16 memory DIMMS. Software licensing is a big concern. Which of the following additions meets this requirement？ （）A、Another HX5B、MAX5C、HS22VD、x3850 X5
A customer wants a Blade to run a very memory intensive application. They require 48 GB with later expansion to 160 GB using 4 GB DIMMs. Which of the following products supports this requirement？（）A、HS22B、HS22VC、LS42D、HX5
QUESTION 14 You have a computer that contains a DVD drive and a single 350-GB hard disk drive. You attempt to installWindows 7 on the computer by using the DVD installation media and receive the following error message:Reboot and Select proper Boot device or Insert Boot Media in selected Boot device. You need to ensurethat you can install Windows 7 on the computer by using the DVD installation media. What should you do?（）A、From the BIOS, modify the startup order.B、From the BIOS, enable Pre-Boot Execution Environment (PXE).C、Create an answer file named oobe.xml and place the file on the hard disk drive.D、Create an answer file named autounattend.xml and place the file on the hard disk drive.
A medical customer has an installed HS21 blade with no local disk. They are attempting to set up boot from SAN using a Windows 2003 CD. Which sequence is correct for this procedure? （）A、Install Windows from the CD using the QLogic driver provided on the CD, configure the LUN and zone for the target server, and then configure the blade UEFI to boot from SAN.B、Configure the LUN and zone for the target server, install Windows from the CD and press F6 when prompted to supply the driver, and then configure the QLogic adapter BIOS to boot from SAN. C、Configure the LUN and zone for the target server, configure the QLogic adapter BIOS to boot from SAN, install Windows from the CD, and then press F6 when prompted to supply the driver. D、Configure the blade UEFI to boot from SAN, configure the LUN and zone for the target server, and then install Windows from the CD using the QLogic driver provided on the CD
An A+ Certified Technician MUST do an install on a Windows XP system from the distribution CD. However， the system does not boot from this CD. What is the MOST likely cause of this problem？（）A、The CD is defective.B、The CD is not bootable.C、The CD-ROM drive is defective.D、The Boot Sequence is not set in the BIOS to boot first from the CD
单选题What is the correct procedure to update the UEFI on HX5 with MAX5 blades without using the AMM?（）AInsert the ServerGuide CD/DVD, boot the HX5 blade and follow the prompts BBoot the blade from the HX5 Bootable Media Creator (BoMC) and follow the prompts CPress F1 when the HX5 system is booting, select Update UEFI, insert the CD/DVD and select OKDMount the IMM virtual disk
单选题A customer asks the sales professional how to update the UEFI on the HX5. They do not want to use AMM. Which is the procedure of the following？（）AInstallServerGuide CD/DVD,boot the HX5 blade and follow the promptsBBoot the blade from the HX5 Bootable Media Creator （BoMC） and follow the promptsCPress F1 while the HX5 is booting，incert the CD/DVD and select OKDMount the IMM virtual disk
单选题A banking customer plans to implement a BladeCenter H chassis. They plan for seven HS22 blades， six HX5 blades with MAX5， one 1U external Fibre Channel switch， and two 3U Fibre Channel storage devices with fourteen 146GB drives. Which is the minimum amount of rack space required to implement the solution of the following？（）A32UB21UC25UD22U
单选题A blade server has been configured to boot from SAN. After an HBA firmware upgrade the blade was rebooted and cannot find the operating system. Which of the following should the administrator do NEXT to troubleshoot the issue？（）AVerify all HBA settings.BUpgrade the blade firmware.CUpgrade the OS level HBA drivers.DSet the system to boot from the local disk.
单选题A customer has the following equipment installed in their data center： （1）an IBM BladeCenter H chassis （2）two power supplies （3）six HS22V blades （4）three Nortel 1/10 GB ESMs The retail customer purchased a new HX5 with MAX5. Which of the following must be added to install the HX5 with MAX5？（）ATwo additional power suppliesBFibre Channel （FC） switches and SAN storageCA Nortel 1/10 GB ESMDSSD for the HX5
单选题QUESTION 14 You have a computer that contains a DVD drive and a single 350-GB hard disk drive. You attempt to installWindows 7 on the computer by using the DVD installation media and receive the following error message:Reboot and Select proper Boot device or Insert Boot Media in selected Boot device. You need to ensurethat you can install Windows 7 on the computer by using the DVD installation media. What should you do?（）AFrom the BIOS, modify the startup order.BFrom the BIOS, enable Pre-Boot Execution Environment (PXE).CCreate an answer file named oobe.xml and place the file on the hard disk drive.DCreate an answer file named autounattend.xml and place the file on the hard disk drive.
单选题A medical customer has an installed HS21 blade with no local disk. They are attempting to set up boot from SAN using a Windows 2003 CD. Which sequence is correct for this procedure? （）AInstall Windows from the CD using the QLogic driver provided on the CD, configure the LUN and zone for the target server, and then configure the blade UEFI to boot from SAN.BConfigure the LUN and zone for the target server, install Windows from the CD and press F6 when prompted to supply the driver, and then configure the QLogic adapter BIOS to boot from SAN. CConfigure the LUN and zone for the target server, configure the QLogic adapter BIOS to boot from SAN, install Windows from the CD, and then press F6 when prompted to supply the driver. DConfigure the blade UEFI to boot from SAN, configure the LUN and zone for the target server, and then install Windows from the CD using the QLogic driver provided on the CD
单选题A banking customer plans to implement a BladeCenter H chassis. They plan for seven HS22 blades, six HX5 blades with MAX5, one 1U external Fibre Channel switch, and two 3U Fibre Channel storage devices with fourteen 146GB drives. Which of the following is the minimum amount of rack space required to implement the solution?（）A32U B25U C22U D21U
单选题An A+ Certified Technician MUST do an install on a Windows XP system from the distribution CD. However， the system does not boot from this CD. What is the MOST likely cause of this problem？（）AThe CD is defective.BThe CD is not bootable.CThe CD-ROM drive is defective.DThe Boot Sequence is not set in the BIOS to boot first from the CD
单选题Customer requests a HX5 blade but his application may demand more than its 16 memory DIMMS. Software licensing is a big concern. Which of the following additions meets this requirement？ （）AAnother HX5BMAX5CHS22VDx3850 X5
单选题A manufacturing customer has an IBM BladeCenter H chassis with four， HX5 with MAX5 4-socket blades installed. Each blade has the optional Fibre Channel Expansion card. The customer wants redundancy and is going to install the following configuration： （1）two Brocade 20-Port SAN Switch Modules （2）two Nortel Networks 1/10 GB Uplink ESM （3）a redundant AMM What is the minimum number of power supplies needed for this configuration to have full redundancy？（）A4B3C2D8
单选题A customer wants to boot from an iSCSI SAN with their IBM BladeCenter infrastructure running Microsoft Windows Server 2000. What is required for the customer to be able to perform this？（）AFibre Channel Expansion Card for each Blade ServerBcKVM Card for each Blade ServerCiSCSI Expansion Card for each Blade ServerD4Gb Modular Flash Drive
单选题Which of the following is the correct procedure to update the BIOS on LS42 blades without using the AMM?（）AInsert the Update eXpress Service Pack Installer (UXSPI) CD, boot the LS42 blade and follow the prompts BBoot the blade to the Bootable Media Creator (BoMC) CD and follow the prompts CPress F1 when the LS42 system is booting, select Update BIOS, insert the diskette into the diskette drive, and select OK DUse the Remote Supervisor Adapter virtual disk