单选题A system administrator has been instructed to attach storage in their client LPARs, in a Power 770, with fibre channel adapters using N_port ID virtualization (NPIV). Which of the following partitions has the minimum requirements to utilize virtual fibre channel?（）ALPAR-A with 1Gb FC HBA and SAN connectionBLPAR-B with 2Gb FC HBA and SAN connectionCLPAR-C with 4Gb FC HBA and SAN connectionDLPAR-D with 8Gb FC HBA and SAN connection
单选题
A system administrator has been instructed to attach storage in their client LPARs, in a Power 770, with fibre channel adapters using N_port ID virtualization (NPIV). Which of the following partitions has the minimum requirements to utilize virtual fibre channel?（）
A
LPAR-A with 1Gb FC HBA and SAN connection
B
LPAR-B with 2Gb FC HBA and SAN connection
C
LPAR-C with 4Gb FC HBA and SAN connection
D
LPAR-D with 8Gb FC HBA and SAN connection
参考解析
解析：
暂无解析
相关考题：
A customer has provided the pSeries technical specialist with details of an HACMP solution that they would like validated. The solution is for two POWER4+ p630 servers directly attached to a FAStT600 storage server as the shared storage. Each system has the following： ？ 2 integrated network ports ？ 2 fibre channel adapter cards ？ 1 power supply and redundant cooling ？ HACMP v5.1 In addition to a second power supply， what further requirements， if any， are needed to validate this solution and ensure no single point of failure？ （）A、One fibre channel switchB、Two fibre channel switchesC、Two Ethernet cardsD、Nothing
Which of the following describes the advantage of using Fibre Channel over Ethernet （FCoE） in POWER6 and POWER7 Blades？（）A、The FCoE card provides both LAN and fibre channel function from a single card on the blade. B、The FCoE advanced technology removes the need for any BladeCenter switching to support this function.C、Component reliability on the fibre channel over Ethernet is higher than on regular Ethernet and fibre channel adapters.D、The AIX device driver for FCoE has been completely rewritten for the current adapter， eliminating errors and performance issues.
A customer wants to install an IBM BladeCenter infrastructure but is concerned about the cost of the full fabric internal fibre switches. Consequently， the customer is considering an N_Port ID Virtualization （NPIV） capable switch. Which of the following should be mentioned to the customer regarding the NPIV switch？（）A、Youcan not use an NPIV switch in the same IBM BladeCenter chassis as a Cisco Intelligent Ethernet SwitchB、Using blade servers with the NPIV switch will require morefibre ports on the external fibre switchC、Storage devices likeFibre Channel Tape and Disk cannot be attached to the NPIV Switch but must connect to a core fabric switch.D、The NPIV switch will count against the number of domains in a fabric
After a server has been installed into a rack, an administrator must ensure which of the following?（）A、Warm air flow is permitted through the front bezelB、The system is labeled so that it can be identifiedC、Verify the change control process can be implementedD、Determine the correct power requirements
A customer has defined their server needs as a four-LPAR 16-way p570 with 64GB of memory， four 10/100/1000 TX LAN adapters， and six fibre channel adapters to external storage in an IBM ESS （Shark）. They like the idea of being able to do SAN maintenance while not incurring downtime. If all LPARs are production related and similar， which question is most appropriate for the pSeries technical specialist to ask？（）A、Would 10/100 Ethernets work as well？B、Should there be eight fibre channel adapters？C、Should there be an async adapter for heartbeat？D、Will all LPARs need access to a common fibre channel tape drive？
While using virtualization to share SAN adapters on a server, how does Node Port ID Virtualization (NPIV) differ from Virtual SCSI (vSCSI) related to the use of multipathing software?（）A、NPIV and vSCSI both require multipathing in VIO Server only. B、NPIV requires multipathing software on client LPARs, vSCSI requires multipathing software on VIO Server. C、NPIV requires multipathing software on VIO Server, vSCSI requires multipathing software on client LPARs. D、NPIV requires multipathing and MPIO software on VIO Server LPARs, vSCSI requires multipathing software on VIO Server and MPIO on client LPARs.
A system administrator has been instructed to attach storage in their client LPARs, in a Power 770, with fibre channel adapters using N_port ID virtualization (NPIV). Which of the following partitions has the minimum requirements to utilize virtual fibre channel?（）A、LPAR-A with 1Gb FC HBA and SAN connectionB、LPAR-B with 2Gb FC HBA and SAN connectionC、LPAR-C with 4Gb FC HBA and SAN connectionD、LPAR-D with 8Gb FC HBA and SAN connection
A small organization is purchasing a POWER5 to consolidate four applications. Currently， each application has two Host Bus Adapters （HBA） connected to an Enterprise Storage Server （ESS）. The customer is concerned about the cost of purchasing eight new HBAs. Which feature of virtualization will be most beneficial to this organization？（）A、Virtual EthernetB、Micro-PartitioningC、Virtual I/O ServerD、Capped and uncapped partitions
A system is being planned with three production partitions, one each for an IBM i, AIX standard edition, and Power Linux applications. One fibre-channel attached TS3100 tape library will be shared between the partitions for backup. Which solution provides tape library sharing with minimum operator intervention?（）A、Configure VIO Server Express Edition to control the tape library through one fibre channel card.Assign the library to the production partitions when needed.B、Configure the IBM i partition to own the tape library.Use IBM i virtualization to host a virtual tape libraryconnection to the AIX and Linux partition.Assign the library to the production partitions when needed.C、Configure a fibre channel card for each partition， and a configure fibre switch.Connect the partitions and tape library to the switch.Zone the switch so all partitions can enable the tape when needed and disable the tape when finished.D、Configure AIX to control the tape library through one fibre channel adapter.Use AIX virtualization to host a virtual tape library connection to the IBM i and Linux partitions.Assign the library to the production partitions when needed.
Company.com has non-IBM fibre attached storage. The storage is connected to a node in the cluster that has multiple adapters and virtual paths. There is a concern about detecting the loss of one of the fibre adapters since there is no indication to the administrator that one has failed. What feature of HACMP can be sued to assist with this issue？（） A、 Disk heartbeatB、 Error notificationC、 Event notificationD、 Application monitor
A System p administrator has been instructed to verify that all filesets have all required requisitesand are completely installed. Which of the following commands will provide this information（）A、lslppB、lppchkC、geninstallD、installp
Company.com has two POWER5 servers. They want the two servers’ virtual Ethernets to appear on the same IP subnet. Which of the following will connect the client virtual Ethernet adapters to the physical Ethernet switch connecting the two servers？（）A、Configure a Shared Ethernet Adapter on the Virtual I/O Server.B、Use the same virtual LAN ID on each LPAR.C、Set up IP routing through an LPAR on each system.D、Set up an IP firewall through an LPAR on each system.
A customer wants to install an IBM BladeCenter infrastructure but is concerned about the cost of the full fabric internal fibre switches. Consequently, the customer is considering an N_Port ID Virtualization (NPIV) capable switch.Which of the following should be mentioned to the customer regarding the NPIV switch?（）A、You can not use an NPIV switch in the same IBM BladeCenter chassis as a Cisco Intelligent Ethernet Switch B、Using blade servers with the NPIV switch will require more fibre ports on the external fibre switch C、Storage devices like Fibre Channel Tape and Disk cannot be attached to the NPIV Switch but must connect to a core fabric switchD、The NPIV switch will count against the number of domains in a fabric
A customer plans to consolidate to high-end enterprise level servers using multiple partitions. They are evaluating an IBM POWER5 solution for their server consolidation environment. Which of the following best describes the value of the IBM solution as compared with the competition？（）A、The POWER5 system has greater memory and processor granularity and can also run both Linux and AIX at the same time in different LPARs.B、The POWER5 system supports more partitions， processors， and memory than any competitor’s solution.C、The POWER5 system has the lowest partitioning overhead and can also run both Linux and AIX at the same time in different LPARs.D、The POWER5 system supports more partitions and has the lowest partitioning overhead.
单选题A customer wants to install an IBM BladeCenter infrastructure but is concerned about the cost of the full fabric internal fibre switches. Consequently, the customer is considering an N_Port ID Virtualization (NPIV) capable switch.Which of the following should be mentioned to the customer regarding the NPIV switch?（）AYou can not use an NPIV switch in the same IBM BladeCenter chassis as a Cisco Intelligent Ethernet Switch BUsing blade servers with the NPIV switch will require more fibre ports on the external fibre switch CStorage devices like Fibre Channel Tape and Disk cannot be attached to the NPIV Switch but must connect to a core fabric switchDThe NPIV switch will count against the number of domains in a fabric
单选题A customer wants to install an IBM BladeCenter infrastructure but is concerned about the cost of the full fabric internal fibre switches. Consequently， the customer is considering an N_Port ID Virtualization （NPIV） capable switch. Which of the following should be mentioned to the customer regarding the NPIV switch？（）AYoucan not use an NPIV switch in the same IBM BladeCenter chassis as a Cisco Intelligent Ethernet SwitchBUsing blade servers with the NPIV switch will require morefibre ports on the external fibre switchCStorage devices likeFibre Channel Tape and Disk cannot be attached to the NPIV Switch but must connect to a core fabric switch.DThe NPIV switch will count against the number of domains in a fabric
单选题A customer has defined their server needs as a four-LPAR 16-way p570 with 64GB of memory， four 10/100/1000 TX LAN adapters， and six fibre channel adapters to external storage in an IBM ESS （Shark）. They like the idea of being able to do SAN maintenance while not incurring downtime. If all LPARs are production related and similar， which question is most appropriate for the pSeries technical specialist to ask？（）AWould 10/100 Ethernets work as well？BShould there be eight fibre channel adapters？CShould there be an async adapter for heartbeat？DWill all LPARs need access to a common fibre channel tape drive？
单选题A customer has provided the pSeries technical specialist with details of an HACMP solution that they would like validated. The solution is for two POWER4+ p630 servers directly attached to a FAStT600 storage server as the shared storage. Each system has the following： ？ 2 integrated network ports ？ 2 fibre channel adapter cards ？ 1 power supply and redundant cooling ？ HACMP v5.1 In addition to a second power supply， what further requirements， if any， are needed to validate this solution and ensure no single point of failure？ （）AOne fibre channel switchBTwo fibre channel switchesCTwo Ethernet cardsDNothing
单选题A System p administrator has been instructed to verify that all filesets have all required requisitesand are completely installed. Which of the following commands will provide this information（）AlslppBlppchkCgeninstallDinstallp
单选题Company.com has non-IBM fibre attached storage. The storage is connected to a node in the cluster that has multiple adapters and virtual paths. There is a concern about detecting the loss of one of the fibre adapters since there is no indication to the administrator that one has failed. What feature of HACMP can be sued to assist with this issue？（）A Disk heartbeatB Error notificationC Event notificationD Application monitor
单选题Which of the following describes the advantage of using Fibre Channel over Ethernet （FCoE） in POWER6 and POWER7 Blades？（）AThe FCoE card provides both LAN and fibre channel function from a single card on the blade. BThe FCoE advanced technology removes the need for any BladeCenter switching to support this function.CComponent reliability on the fibre channel over Ethernet is higher than on regular Ethernet and fibre channel adapters.DThe AIX device driver for FCoE has been completely rewritten for the current adapter， eliminating errors and performance issues.
单选题A customer plans to consolidate to high-end enterprise level servers using multiple partitions. They are evaluating an IBM POWER5 solution for their server consolidation environment. Which of the following best describes the value of the IBM solution as compared with the competition？（）AThe POWER5 system has greater memory and processor granularity and can also run both Linux and AIX at the same time in different LPARs.BThe POWER5 system supports more partitions， processors， and memory than any competitor’s solution.CThe POWER5 system has the lowest partitioning overhead and can also run both Linux and AIX at the same time in different LPARs.DThe POWER5 system supports more partitions and has the lowest partitioning overhead.
单选题After a server has been installed into a rack, an administrator must ensure which of the following?（）AWarm air flow is permitted through the front bezelBThe system is labeled so that it can be identifiedCVerify the change control process can be implementedDDetermine the correct power requirements
单选题A system is being planned with three production partitions, one each for an IBM i, AIX standard edition, and Power Linux applications. One fibre-channel attached TS3100 tape library will be shared between the partitions for backup. Which solution provides tape library sharing with minimum operator intervention?（）AConfigure VIO Server Express Edition to control the tape library through one fibre channel card.Assign the library to the production partitions when needed.BConfigure the IBM i partition to own the tape library.Use IBM i virtualization to host a virtual tape libraryconnection to the AIX and Linux partition.Assign the library to the production partitions when needed.CConfigure a fibre channel card for each partition， and a configure fibre switch.Connect the partitions and tape library to the switch.Zone the switch so all partitions can enable the tape when needed and disable the tape when finished.DConfigure AIX to control the tape library through one fibre channel adapter.Use AIX virtualization to host a virtual tape library connection to the IBM i and Linux partitions.Assign the library to the production partitions when needed.
单选题While using virtualization to share SAN adapters on a server, how does Node Port ID Virtualization (NPIV) differ from Virtual SCSI (vSCSI) related to the use of multipathing software?（）ANPIV andvSCSI both require multipathing in VIO Server only.BNPIV requiresmultipathing software on client LPARs, vSCSI requires multipathing software on VIO Server.CNPIV requiresmultipathing software on VIO Server, vSCSI requires multipathing software on client LPARs.DNPIV requiresmultipathing and MPIO software on VIO Server LPARs, vSCSI requires multipathing software on VIO Server and MPIO on client LPARs.
单选题A "trusted" client needs to communicate with a server that has been configured to use CLIENT authentication. Which of the following will be used to verify passwords?（）AUser ID/password fileBCommunications layerCClient applicationsDOperating system
单选题Company.com has two POWER5 servers. They want the two servers’ virtual Ethernets to appear on the same IP subnet. Which of the following will connect the client virtual Ethernet adapters to the physical Ethernet switch connecting the two servers？（）AConfigure a Shared Ethernet Adapter on the Virtual I/O Server.BUse the same virtual LAN ID on each LPAR.CSet up IP routing through an LPAR on each system.DSet up an IP firewall through an LPAR on each system.