单选题A floppy drive is replaced in a computer and now when the computer is turned on the floppy drive light is constantly lit. Which of the following is the MOST likely cause?（）AThe power supply has failed.BThe drive cable is connected backwards.CThe floppy drive has failed.DThe proper drivers have not been loaded.
单选题
A floppy drive is replaced in a computer and now when the computer is turned on the floppy drive light is constantly lit. Which of the following is the MOST likely cause?（）
A
The power supply has failed.
B
The drive cable is connected backwards.
C
The floppy drive has failed.
D
The proper drivers have not been loaded.
参考解析
解析：
暂无解析
相关考题：
A folder on your Windows 2000 Professional computer contains bitmap files that have been compressed from 2MB to 1MB. You want to copy one of the compressed bitmap files from the hard disk to 1.4-MB floppy disk.When you attempt to copy, you receive the following error message 'Destination drive is Full'.What should to do?A．Move, rather than copy, the compressed bitmap file to the floppy disk.B．Reformat the floppy disk. Then copy the compressed bitmap file to the floppy disk.C．Use another program to compress the bitmap file before copying it to the floppy disk.D．Copy an empty compressed folder to the floppy disk. Then copy the compressed bitmap file to the folder on the floppy disk.
You are installing Windows 2000 Server on a new computer that has a hardware-based RAID array, a floppy disk drive, and a CD-ROM drive. The disk controller for the RAID array is not included on the current Hardware Compatibility List (HCL). You run Windows 2000 Setup by starting the computer from the Windows 2000 Server CD-ROM.When the computer restarts at the end of the text mode portion of Windows 2000 Setup, you receive the following STOP error: "INACCESSABLE_BOOT_DEVICE ".Which two actions should you take to eliminate the STOP error? (Choose Two)A. Modify the Boot.ini file.B. Restart Windows 2000 Setup by using the Windows 2000 Server CD-ROM.C. Select Safe Mode from the Windows 2000 boot menu.D. Remove the Windows 2000 Server CD-ROM from the CD-ROM drive.E. Install a driver for the RAID controller form. a floppy disk.F. Use Device Manager to update the driver for the RAID controller.
A technician replaced a floppy drive and now the front indicator light is consistently illuminated.Which of the following is the cause for this?() A. It is a feature of new floppy drives.B. The data cable was put on backwards.C. A disk is being read by the floppy drive.D. The new floppy drive is defective.
A technician has installed a secondary hard drive for a computer. However, the hard drive is not appearing under My Computer. The disk is receiving power, and appeared on the POST when Windows started.Which of the following Windows utilities would help configure the new hard disk?（）A. Disk ManagementB. Services and ApplicationsC. Removable StorageD. Device Manager
When servicing a laptop, which of the following components usually requires the keyboard to beremoved before the component can be replaced?() A. ProcessorB. Hard driveC. BatteryD. Optical drive
Your Windows 2000 Server computer has a 10-GB hard disk with two partitions: Drive C and drive D. Windows 2000 Server is installed on Drive D. Both partitions are formatted as NTFS. Your office experiences a power failure that causes your Windows 2000 Server computer to restart.When the computer is restarting, you receive the following error message "NTLDR is missing. Press any key to restart".What should you do?A．Start the computer by using Windows 2000 Server computer CD-ROM and choose to repair the installation. Select the Recovery Console and copy the NTLDR file on the CD-ROM to the root of the system partition.B．Start the computer in debugging mode. Copy the NTLDR file on the CD-ROM to the root of the system partition.C．Start the computer by using the Windows 2000 bootable floppy disk. From a command prompt, run the sfc/scanboot command.D．Start the computer by using a Windows 2000 bootable floppy disk. Run the File Signature Verification utility.
When servicing a laptop, which of the following components usually requires the keyboard to beremoved before the component can be replaced?（）A、ProcessorB、Hard driveC、BatteryD、Optical drive
When a user’s computer is first turned on, they see a lock symbol and a blinking cursor. Which of the following was configured in the BIOS to show this?（）A、Intrusion detectionB、Power on passwordC、Drive encryptionD、BIOS password
A folder on your Windows 2000 Professional computer contains bitmap files that have been compressed from 2MB to 1MB. You want to copy one of the compressed bitmap files from the hard disk to 1.4-MBfloppy disk. When you attempt to copy， you receive the following error message ‘Destination drive is Full’. What should to do？（）A、Move， rather than copy， the compressed bitmap file to the floppy disk.B、Reformat the floppy disk.Then copy the compressed bitmap file to the floppy disk.C、Use another program to compress the bitmap file before copying it to the floppy disk.D、Copy an empty compressed folder to the floppy disk. Then copy the compressed bitmap file to the folder on the floppy disk.
A technician replaced a floppy drive and now the front indicator light is consistently illuminated.Which of the following is the cause for this?（）A、It is a feature of new floppy drives.B、The data cable was put on backwards.C、A disk is being read by the floppy drive.D、The new floppy drive is defective.
A computer has been upgraded with a new hard drive and after reassembling the computer and turning the computer on， the drive LED remains lit and an error message during power-on self test （POST） states， ’No Drive Present.’ Which of the following would MOST likely be the cause？（）A、The motherboard was damaged and needs replacing.B、The floppy drive was not reconnected.C、A configuration disk was left in the floppy drive.D、The ribbon cable has been installed incorrectly.
The error ’invalid boot disk’ means：（）A、the BIOS settings are incorrect.B、there is no floppy disk in the drive.C、the computer was unable to make temporary space for the boot process.D、the computer was unable to find the information needed to start the boot process.
After POST, the error message ‘Invalid system disk. Replace and press any key’ appears. Which of the following is MOST likely the cause?（）A、There is a non-bootable CD in the CD-ROM drive.B、There is a non-bootable DVD in the DVD-ROM drive.C、There is a non-bootable Blu-Ray in the Blu-Ray drive.D、There is a non-bootable floppy in the floppy drive.
A technician has installed a secondary hard drive for a computer. However, the hard drive is not appearing under My Computer. The disk is receiving power, and appeared on the POST when Windows started. Which of the following Windows utilities would help configure the new hard disk?（）A、Disk ManagementB、Services and ApplicationsC、Removable StorageD、Device Manager
Where are the first computer instructions available when a microcomputer is powering up？（）A、floppy driveB、boot.iniC、ROMD、config.sys
Which of these are symptoms of malware on a computer? （）(Select TWO).A、Hard drive and network activity is higher when the computer is idleB、CD-ROM ejects unexpectedly from the computerC、Web browser accesses unexpected websitesD、Prints from the computer have random characters and symbols instead of textE、The monitor has a permanent image burned into the display
A floppy drive is replaced in a computer and now when the computer is turned on the floppy drive light is constantly lit. Which of the following is the MOST likely cause?（）A、The power supply has failed.B、The drive cable is connected backwards.C、The floppy drive has failed.D、The proper drivers have not been loaded.
A newly installed floppy drive activity light stays on. Which of the following is the MOST likely problem?（）A、The computer does not support this type of drive.B、Connector is plugged in backwards.C、Power is plugged in backwards.D、All floppies are corrupt.
When attempting to boot a PC, the POST process completes without error. The PC then displays,‘non system disk or disk error’. Which of the following would MOST likely cause the issue?（）A、Out-of-date BIOSB、Invalid motherboard jumper settingsC、Failing power supplyD、Floppy disk in the drive
An administrator has replaced a faulty drive in a server using software RAID. The drive needs to now be partitioned before being added back to the array. Which of the following tools should the administrator use to accomplish this？（）A、chkdskB、mountC、fsckD、diskpart
You are the desktop administrator for your company. You install Windows XP Professional on a new portable computer that will be used by one of the company's software developers. You test the computer after you complete the installation and find out that the computer functions properly. The computer contains a 6-GB hard disk and a removable 4-GB hard disk. The 6-GB hard disk is configured as drive C, and the removable hard disk is configured as drive D. You install Windows 98 on drive D and deliver the computer to the software developer. The software developer reports that the computer does not start when drive D is not connected. Instead, the computer briefly displays an operating system menu, and then it displays an error message stating that an operating system could not be found. When drive D is connected, the computer starts Windows 98. You need to configure the computer so that it starts Windows XP Professional whether or not drive D is connected. What should you do?（）A、Modify the computer's BIOS so that it automatically detects whether drive D is connected.B、Modify the computer's BIOS so that drive C is first in the computer's boot order. C、Modify the Boot.ini file on the computer by changing the default= entry to the following value: multi(0)disk(0)rdisk(0)partition(1)="Microsoft Windows XP Professional" /fastdetect.D、Modify the Boot.ini file on the computer by changing the entry for Windows 98 to the following value: D: "Microsoft Windows 98" /fastdetect.
You are the desktop administrator for your company. The company's network contains a RIS server, a DHCP server, and a DNS server. You need to install Windows XP Professional on a computer that does not have a CD-ROM drive. The computer has the following configuration: a Pentium III 1-GHz processor, a 5-GB hard disk, 128 MB of RAM, a modem in the first PCI slot ,an Ethernet card in the last ISA slot. You attempt to install Windows XP Professional on the computer by using a RIS bootable floppy disk. However, you are unable to connect to the RIS server. What should you do?（） A、Move the Ethernet card to the first ISA slot. B、Remove the Ethernet card and replace it with an Ethernet card that is PXE compliant. C、Share the RIS image on the RIS server. Create a network bootable floppy disk. Insert the floppy disk, and install Windows XP Professional from the share. D、Place the NDIS network drivers in the root directory of the RIS bootable floppy disk. Use the floppy disk to connect to the RIS server.
单选题A computer has been upgraded with a new hard drive and after reassembling the computer and turning the computer on， the drive LED remains lit and an error message during power-on self test （POST） states， ’No Drive Present.’ Which of the following would MOST likely be the cause？（）AThe motherboard was damaged and needs replacing.BThe floppy drive was not reconnected.CA configuration disk was left in the floppy drive.DThe ribbon cable has been installed incorrectly.
单选题A newly installed floppy drive activity light stays on. Which of the following is the MOST likely problem?（）AThe computer does not support this type of drive.BConnector is plugged in backwards.CPower is plugged in backwards.DAll floppies are corrupt.
单选题A floppy drive is replaced in a computer and now when the computer is turned on the floppy drive light is constantly lit. Which of the following is the MOST likely cause?（）AThe power supply has failed.BThe drive cable is connected backwards.CThe floppy drive has failed.DThe proper drivers have not been loaded.
单选题A technician replaced a floppy drive and now the front indicator light is consistently illuminated.Which of the following is the cause for this?（）AIt is a feature of new floppy drives.BThe data cable was put on backwards.CA disk is being read by the floppy drive.DThe new floppy drive is defective.
单选题Which of the following errors are caused by leaving a floppy disk in the drive when a computer is powered on?（）ARandom bluescreen errorBInaccessible boot driveCMissing NTLDRDInvalid boot disk
单选题The error ’invalid boot disk’ means：（）Athe BIOS settings are incorrect.Bthere is no floppy disk in the drive.Cthe computer was unable to make temporary space for the boot process.Dthe computer was unable to find the information needed to start the boot process.