单选题You creating a report that will run in both character mode and bitmapped environments. You include some printer codes in your report. What will happen when you run the report in bitmapped mode? （）AThe report will not execute. BThe report will only accept destination type of previewer or printer. CPrinter codes will be ignored. DOnly the printer codes that apply will be processes.
单选题
You creating a report that will run in both character mode and bitmapped environments. You include some printer codes in your report. What will happen when you run the report in bitmapped mode? （）
A
The report will not execute.
B
The report will only accept destination type of previewer or printer.
C
Printer codes will be ignored.
D
Only the printer codes that apply will be processes.
参考解析
解析：
暂无解析
相关考题：
Examine this statement: SELECT student_id, gpa FROM student_grades WHERE gpa > You run the statement once, and when prompted you enter a value of 2.0. A report is produced. What happens when you run the statement a second time?（）A. An error is returned.B. You are prompted to enter a new value.C. A report is produced that matches the first report produced.D. You are asked whether you want a new value or if you want to run the report based on the previous value.
You are the administrator of three SQL Server 2000 computers at Five Lakes Publishing. One server, FLPSQL01, stores order data. You want to be able to use the other two servers, FLPSQL02 and FLPSQL03, to answer queries and run report. The planned network configuration is shown in the exhibit.You want to use the database Maintenance Plan wizard to configure log shipping from FLPSQL01 to FLPSQL02 and FLPSQL03. You do not want users to add any new data on FLPSQL02 and FLPSQL03, but they must be able to run queries and reports.Which two actions should you take? (Each correct answer presents part of the solution. Choose two)A．Set the database load state for each destination server to No recovery mode.B．Set the database load state for each destination server to standby mode.C．Enable the allow database to assume primary role option for both destination servers.D．Enable the allow database to assume primary role option for one destination server and then disable this option for other destination server.E．Disable the allow database to assume primary role option for both destination servers.
Refer to the exhibit. You have completed an OSPF implementation, and you are verifying OSPF operation. You notice that router A and router B are stuck in the two - way state. From the show ip ospf interface command output, what is the cause of this issue?（）A. All OSPF implementations must have at le ast one interface in area 0.B. You are attempting to run in the broadcast mode over an NBMA interface.C. Both routers are configured to function as a BDR; therefore, there is no DR router.D. Someone has changed the OSPF router ID; therefore you must clear the OSPF process.E. The OSPF priority is set to 0 on both routers; therefore neither can become the DR.
Which of the following is TRUE about the ping -f command?（）A、 It is useful for diagnosing data dependent problems by filling the packet with the byte pattern following the "f" in the command line. B、 It is useful for flooding from slow character based terminals since it only displays a dot "." for each packet sent in fast mode. C、 It is useful for flooding from slow character based terminals since it only displays a dot "." for each packet sent and a backspace on returned in fast mode. D、 The command can only be run by root.
You are the desktop administrator for ExamSheet. Your Windows 2000 Professional computer is configured to support two monitors. You install a DOS-based application on your computer. The application uses the Windows 2000 Professional default settings Autoexec.nt and Config.nt. Your primary and secondary video adapters are both set to 32 bit color, 800 x 600 resolution, and default refresh rates. You create a shortcut for the DOS-based application on the primary monitor's desktop and use the default PIF settings. You attempt to run the DOS-based application on the primary monitor. The application opens, but the display area is scrambled. You then attempt to run the DOS-based application on the secondary monitor. The application does not open. Both monitors function correctly when you run Windows based applications. You want to be able to run the DOS-based application on either monitor. What should you do?（）A、Reconfigure the PIF settings of the DOS-based application to start in a window.B、Reconfigure the shortcut properties to run the DOS-based application in full screen mode.C、Change the drivers for both video adapters from WDM compliant drivers to DOS drivers.D、Change the refresh rate setting to 72 hertz for both video adapters.E、Change the color setting for both video adapters to 256 colors.
You creating a report that will run in both character mode and bitmapped environments. You include some printer codes in your report. What will happen when you run the report in bitmapped mode? （）A、The report will not execute. B、The report will only accept destination type of previewer or printer. C、Printer codes will be ignored. D、Only the printer codes that apply will be processes.
Your business has departmental reports that are generated every day. Each department must use the same set of queries， but access a different subset of data in the tables， depending on which department generates the report. The format of the reports is being developed； currently， the format changes daily. How would you configure the database to ensure that each department generates its report （based on its target data） using the most recent report format every day？（）A、 By having each user run the report generation procedure at the scheduled time， supplying the necessary input variables.B、 By creating a program using DBMS_JOB that accepts one or more variables， and creating a job that calls this program using DBMS_JOB.C、 By having each user schedule a job using DBMS_JOB that accepts one or more input variables and calls a procedure that generates the report.D、 By having each user create a job using DBMS_SCHEDULER that includes all the information and commands necessary to generate the report.E、 By creating a program using DBMS_SCHEDULER that accepts one or more variables， and creating a job that calls this program using DBMS_SCHEDULER.
You have a server that runs Windows Server 2003 Service Pack 2 (SP2). A server application creates report files. The application saves the report files in a folder named Report. A service account is listed as the owner of all report files. You need to assign ownership of the report files to a user in a department named Audit. You must achieve this goal by using the minimum amount of administrative effort. What should you do? （）A、Rewrite the application.B、Create a scheduled task to run Attrib.exe.C、Create a scheduled task to run Icacls.exe.D、Use the Advanced Security settings to change the owner of each file.
You have two computers named Computer1 and Computer2 that run Windows 7. Both computers are members of an Active Directory domain. Windows Remote Management (WinRM) is enabled on both computers. You need to remotely create additional disk volumes on Computer1 from Computer2. What should you do? （）A、On Computer2, run Winrs and then run Diskpart. B、On Computer2, run Winrs and then run Diskmgmt.msc. C、On Computer1, install the Telnet Client and then run Diskpart from Computer2. D、On Computer1, install the Telnet Client and then use Disk Management from Computer2.
You are the desktop administrator for ExamSheet. Your Windows 2000 Professional computer is configured to support two monitors. You install a DOS-based application on your computer. The application uses the Windows 2000 Professional default settings Autoexec.nt and Config.nt. Your primary video adapter is set to 24 bit color, 800 x 600 resolution, and default refresh rates. Your secondary video adapter is set to 32 bit color, 1024 x 768 resolution, and a refresh refresh of 72 hertz. You create a shortcut for the DOS-based application on the secondary monitor's desktop and use the default PIF settings. You attempt to run the DOS-based application on the secondary monitor. The application opens, but the display area is scrambled. You then attempt to run the DOS-based application on the primary monitor. The application does not open. Both monitors function correctly when you run Windows based applications. You want to be able to run the DOS-based application on either monitor. What should you do?（）A、Reconfigure the shortcut properties to run the DOS-based application in full screen mode.B、Reconfigure the PIF settings of the DOS-based application to start in a window.C、Change the drivers for both video adapters from WDM compliant drivers to DOS drivers.D、Change the refresh rate setting to 72 hertz for both video adapters.E、Change the color setting for both video adapters to 256 colors.
Two Exchange Servers 2010 has Mailbox Servers.You create a DAG.You need to install all of Failover Clustering Components on Mailbox Servers. What should you do？（）A、Add both Servers to DAGB、Install Application Server Role on both ServersC、Run Setup /Roles：MB /NewCMS on both serversD、Run Start -clusteredMailboxServer cmdlet on both servers
You are the desktop administrator for your company. All users in the network have Windows XP Professional computers. Users in the research department have dual-processor computers. Users in the research department report that when they run 16-bit Windows programs, their computer performance becomes very slow. You use System Monitor to monitor the users’ computers. You discover that when the users are running their 16-bit applications, one processor shows a sustained utilization of more than 90 percent while the other processor only shows utilization of less than 10 percent. You need to improve application performance for the users in the research department. What should you do?（）A、Configure each application to run in a separate memory space.B、Configure each application to run in AboveNormal priority class.C、For each application, set the compatibility mode to Windows 95. D、Configure processor affinity for each application to allow it to run on both processors.
You notice a performance change in your production Oracle database and you want to know which change has made this performance difference. You generate the Compare Period Automatic Database Diagnostic Monitor (ADDM) report to further investigation. Which three findings would you get from the report?（）A、It detects any configuration change that caused a performance difference in both time periods.B、It identifies any workload change that caused a performance difference in both time periods.C、It detects the top wait events causing performance degradation.D、It shows the resource usage for CPU, memory, and I/O in both time periods.E、It shows the difference in the size of memory pools in both time periods.F、It gives information about statistics collection in both time periods.
单选题Your business has departmental reports that are generated every day. Each department must use the same set of queries， but accesses a different subset of data in the tables， depending on which department generates the report. The format of the reports is being developed; currently， the format changes daily. How would you configure the database to ensure that each department generates its report （based on its target data） using the most recent report format every day？（）Aby having each user run the report generation procedure at the scheduled time， supplying the necessary input variablesBby creating a program using DBMS_JOB that accepts one or more variables， and creating a job that calls this program using DBMS_JOBCby having each user schedule a job using DBMS_JOB that accepts one or more input variables and calls a procedure that generates the reportDby having each user create a job using DBMS_SCHEDULER that includes all the information and commands necessary to generate the reportEby creating a program using DBMS_SCHEDULER that accepts one or more variables， and creating a job that calls this program using DBMS_SCHEDULER
单选题You created a department report and preview it in life preview. The font for the department name is too small and you want to enlarge it but do not want to change the font for any other fields. What is the easiest way to make this change?（）ASelect the text to be enlarged in the life previewer and make the size change using the style bar. BSelect the text to be enlarged in the layout mode and make the change. COpen the report wizard in the re-entrant mode and make the change. DMake the copy of the report, open the copy, make the changes and then delete the original report.
单选题You use a Windows 2000 Professional computer to run a weekly report. When the report is running on the computer, another task stops responding and eventually times out. When you run only the other task, the task completes successfully. You use Task Manager to view your system resources. In the weekly report, the processor time counter reads a high value. You want to resolve the problem by using Task Manager. What should you do?（）AUpgrade the RAM of this computer.BAdd another hard disk to the computer and execute the report application from that hard drive.CSplit the paging file across two physical disks.DDecrease the base priority of the weekly report task.
多选题You are the desktop administrator for ExamSheet. Your Windows 2000 Professional computer is configured to support two monitors. You install a DOS-based application on your computer. The application uses the Windows 2000 Professional default settings Autoexec.nt and Config.nt. Your primary and secondary video adapters are both set to 32 bit color, 800 x 600 resolution, and default refresh rates. You create a shortcut for the DOS-based application on the primary monitor's desktop and use the default PIF settings. You attempt to run the DOS-based application on the primary monitor. The application opens, but the display area is scrambled. You then attempt to run the DOS-based application on the secondary monitor. The application does not open. Both monitors function correctly when you run Windows based applications. You want to be able to run the DOS-based application on either monitor. What should you do?（）AReconfigure the PIF settings of the DOS-based application to start in a window.BReconfigure the shortcut properties to run the DOS-based application in full screen mode.CChange the drivers for both video adapters from WDM compliant drivers to DOS drivers.DChange the refresh rate setting to 72 hertz for both video adapters.EChange the color setting for both video adapters to 256 colors.
单选题You are creating a tabular report for the sales department with a department break group. You need to ensure that if al least six sales records will not fit at the button of a page, the group will start on the next page. Which printing frame property would you alter to achieve these results?（）ASource BPrint direction CMaximum records per page DMinimum Widow records EColumn mode
单选题36 You are creating a report wizard to create a matrix report. The query build, you select the patient_name column from the patient table; the doctor_name from the doctors table; and the doctor_ID, patient_ID and ID columns from the procedure table. In the report wizard you select patient_name as the row value, doctor_ID as the column values and the count as the cell values. You need to add a total for each doctors column. In the wizard report which tab will allow you to create the summary column?（）ARows BTotals CColumns DCells EData
单选题Examine this statement: SELECT student_id, gpa FROM student_grades WHERE gpa value; You run the statement once, and when prompted you enter a value of 2.0. A report is produced. What happens when you run the statement a second time?（）AAn error is returned.BYou are prompted to enter a new value.CA report is produced that matches the first report produced.DYou are asked whether you want a new value or if you want to run the report based on the previous value.
单选题The character mode sales report is stored on the network drive as a .REX. You need to make changes to the report layout. Using the report builder how would you change this file?（）AOpen the file using the menu option file-open make the changes and recompile the report. BConvert the file into .REP file using the report compiler make the changes and convert the file back to a .REX file. CExecute the R30CONV command to convert the file to a .RDF file, make the changes and convert the file back to a .REX file. DChoose file - administration-compile. Convert the file to a .REP file, make the changes and convert the file back to a .REX file. EExecute the R30CONV command to convert the file to a .REP file, make the changes and convert the file back to a .REX file.
单选题You create the sales report and run it in the live previewer. After which change would the live previewer require the data? （）ARemoving column from the available list in the report wizard. BRemoving the column from the displayed list in the report wizard. CChanging the display width of a column in the report wizard. DAdding a column to both the available list and displayed list in the report wizard. ERemoving a column in the live previewer.
多选题You need to create a trigger to locate the Product report in the Rpt_Server, run the report, and test the status of the report. Which three built-ins would you use to accomplish this task?（）ARUN_PRODUCTBSET_REPORT_OBJECT_PROPERTYCRUN_REPORT_OBJECTDFIND_REPORT_OBJECTEREPORT_OBJECT_STATUSFCOPY_REPORT_OBJECT_OUTPUT
单选题You are the top of the hierarchy in configuration mode. How would you save your configuration to a file on the router?（）Asave configuration filenameBsave config filenameCsave filenameDsave run filename
单选题You have a portable computer that runs Windows 7. You configure the computer to enter sleep mode after10 minutes of inactivity. You do not use the computer for 15 minutes and discover that the computer has notentered sleep mode. You need to identify what is preventing the computer from entering sleep mode. What should you do?（）AAt a command prompt， run Powercfg energy.BAt a command prompt， run Systeminfo /s localhost.CFrom Performance Monitor， review the System Summary.DFrom Performance Information and Tools， review the detailed performance and system information.
单选题Examine this statement: SELECT student_id, gpa FROM student_grades WHERE gpa value; You run the statement once, and when prompted you enter a value of 2.0. A report is produced. What happens when you run the statement a second time?（）AAn error is returned.BYou are prompted to enter a new value.CA report is produced that matches the first report produced.DYou are asked whether you want a new value or if you want to run the report based on the previous value.