单选题You install a SCSI adapter and a SCSI tape drive on your Windows 2000 Professional computer. You start the computer. Windows 2000 Professional detects and installs drivers for the new SCSI devices. Later the same day, you restart your computer. During the startup process, the computer stops loading Windows 2000 Professional. You then restart the computer and it stops again. You want to enable your Windows 2000 Professional computer to start successfully. What should you do? （）AStart the computer in safe mode. Enable driver signing.BStart the computer in safe mode. Use Device Manager to remove the SCSI tape device.CStart the computer by using the Recovery Console. Repair the Master Boot Record by using the fixmbr command.DStart the computer by using the Recovery Console. Disable the SCSI adapter device driver by using the disable command.
单选题
You install a SCSI adapter and a SCSI tape drive on your Windows 2000 Professional computer. You start the computer. Windows 2000 Professional detects and installs drivers for the new SCSI devices. Later the same day, you restart your computer. During the startup process, the computer stops loading Windows 2000 Professional. You then restart the computer and it stops again. You want to enable your Windows 2000 Professional computer to start successfully. What should you do? （）
A
Start the computer in safe mode. Enable driver signing.
B
Start the computer in safe mode. Use Device Manager to remove the SCSI tape device.
C
Start the computer by using the Recovery Console. Repair the Master Boot Record by using the fixmbr command.
D
Start the computer by using the Recovery Console. Disable the SCSI adapter device driver by using the disable command.
参考解析
解析：
暂无解析
相关考题：
You need to install Windows 2000 Server on one of your older Windows NT Server 4.0 computers. The server has dual processors, 2 GB of RAM, a RAID controller with five SCSI hard disks in an array, and a generic 10/100-MB network adapter. You begin the server installation by updating the SCSI firmware.You then start the installation of the Windows 2000 Server operating system. During the next portion of the installation, you receive an error message indicating that no hard disks can be found.You want to successfully install Windows 2000 Server on the computer.What should you do? (Each correct answer presents part of the solution. Choose two)A．Restart the installation by using the Windows 2000 Installation CD-ROM. Press F3 during the text-mode setup.B．Restart the installation by using the Windows 2000 Installation CD-ROM. Press F6 during the text-mode setup.C．Restart the installation by using a MS-DOS boot disk with a CD-ROM driver.D．Insert a disk with the original SCSI firmware.E．Insert a disk with the OEM SCSI driver.
Which command enables new devices that are connected to the scsi5 adapter without performing a full scan of the system?() A.cfgmgr -f scsi5B.cfgmgr -i scsi5C.cfgmgr -t scsi5D.cfgmgr -l scsi5
You install Windows 2000 Professional onto an NTFS partition on your computer. During theinstallation, you manually specify the OEM driver for the tape device SCSI controller. After theinstallation, you run the Winnt32 /cmdcons command. Then you successfully install the latest Windows2000 service pack.Next, you install an updated driver for the tape device SCSI controller. When you restart the system andlog on to the computer, you receive a stop error.You need to restore the functionality of the SCSI controller with the least amount of administrative effort. What should you do? （）A、Restart the computer in Safe Mode. Reinstall the functional SCSI controller driver. B、Restart the computer into Recovery Console. Replace the faulty SCSI controller driver with the functional one. C、Start the computer by using a Windows 2000 Professional disk. Replace the faulty SCSI controller driver with the functional one. D、Install a parallel copy of Windows 2000 Professional in a separate folder. Copy the functional SCSI controller driver into the original system folder, and restart the computer to the previous installation.
Company.com wants to create four partitions on a pSeries p5-570 8-way with one SCSI PCI adapter connected to an external LTO tape drive. The partitions are to be created from an existing system image backup tape. Which of the following actions will enable the creation of the partitions with minimal intervention？（）A、Install a VIO partition to share the tape drive.B、Purchase three external SCSI adapters and physically move the tape drive when needed.C、Create the partition definitions with the SCSI adapter as a desired resource and use DLPAR commands to move the tape drive.D、Create the partition definitions with the SCSI adapter as a required resource for all partitions and use DLPAR commands to move the tape drive.
You install Windows 2000 Professional on your portable computer. You use a docking station for your portable computer when you are in the office. You install an ISA-based SCSI adapter in your docking station. You insert your computer into the docking station and start the computer. The SCSI adapter is not detected during the startup process. You start the Add/Remove Hardware wizard. When the wizard process is finished, the SCSI adapter is not listed. You want to allow Windows 2000 Professional to detect the SCSI adapter. What should you do? （）A、Restart the Add/Remover Hardware wizard. Manually add the SCSI adapter drivers.B、Restart the computer in safe mode. Restart the Add/Remove Hardware wizard to detect the SCSI adapter.C、Configure Windows 2000 Professional to use driver signing. Restart the Add/Remove Hardware wizard to detect the SCSI adapter.D、Copy the SCSI adapter drivers to the Winnt/Driver Cache/i386 folder. Restart the Add/Remover Hardware wizard to detect the SCSI adapter.
HP Library Tape Tools的功能有（）A、查看autoloader和drive的错误日志B、可以识别出连接主机的所有SCSI 设备C、查看autoloader的详细配置和信息D、升级autoloader和drive的firmware
An administrator is up grading the back up server from a single tape drive to a SCSI tape library. The library has been unpackaged， mounted， and the library drivers installed. Which of the following items should the administrator have to connect the device to the backup server？（）A、 SCSI cableB、 SCSI interface adapter on the tape libraryC、 SCSI termination card on the serverD、 iSCSI cable
You ran out of space and added a eighth disk to your SCSI-1 system. When you try to start， the system no longer boots. What is most likely the cause of this problem？（）A、 SCSI-1 supports only 8 devices including the adaptor.B、 SCSI-1 supports only 6 disks per adaptor.C、 There is a SCSI-ID conflict that causes that problem.D、 You forgot to set the SCSI-ID #8 for the new disk.
A customer has an x445 and uses the internal LSI adapter to manage two 146GB drives in the chassis. The customer is noticing performance issues when deploying a database with significant write activity on the internal drives. Should they consider using a ServeRAID-6M with 256MB of cache instead， and why or why not？（）A、Yes， the internal LSI SCSI adapter has no write cache.B、Yes， the internal LSI SCSI adapter is unreliable.C、No， the downtime to install the card and reformat the drives would be cost prohibitive.D、No， there will be no performance benefit， because drive performance is the bottleneck.
A client has an existing Logical Partition (LPAR) on a p650 running AIX 5.2 and will be porting this LPAR to a p5 590. A mksysb has been run to tape, and a compatible tape drive is available and allocated to the target LPAR on the p5 590. What additional resource needs to be available on the p5 590?（）A、A CD or DVD with installation mediaB、An internal SCSI adapter in the target LPARC、An Ethernet adapter for access to an FTP serverD、Advanced Power Virtualization feature of the p5 590
Which command enables new devices that are connected to the scsi5 adapter without performing a full scan of the system?（）A、cfgmgr -f scsi5B、cfgmgr -i scsi5C、cfgmgr -t scsi5D、cfgmgr -l scsi5
You install Windows 2000 Professional on your portable computer. You install an SCSI and PC card adapter, that you can use in the office to use color scanner. You use a docking station for your computer when you are in the office. You want to maximize the battery performance for your portable computer. You also want to prevent the driver from loading whenever you are away from the office. What should you do?（）A、When away from the office use Device Manager to remove the adapter. B、When away from the office configure the startup properties for the adapter to be automatic. C、Remove the computer from the docking station and start Windows 2000 Professional to disable the SCSI PC card adapter device for the current profile.D、Remove the computer from the docking station and start Windows 2000 Professional, use Device Manager to remove SCSI PC card adapter device.
You are the network administrator for ExamSheet. You have implemented the Hisecws.inf security template on all the Windows 2000 Professional client computers in your network. A user has received a driver and utility software for an internal SCSI controller in his computer. The SCSI controller is not currently on the Hardware Compatibility List (HCL). He uses the manufacturer provided CD to install the driver and the utility. He restarts the computer and reports that the internal SCSI controller is not working correctly. You discover that the driver is not installed correctly. You want to install the SCSI driver without permanently reducing security on the client computer. What should you do?（）A、Run theSfc /cancelcommand.B、Run theSigverifcommand.C、Reconfigure the Driver Signing option.D、Install the SCSI driver.E、Run theSfc /enablecommand. F、Reapply the security template settings.
You are the network administrator for ExamSheet.net. You install Windows 2000 Professional on your portable computer. You use a docking station for your portable computer when you are in the office. You install a ISA-based network adapter in your docking station. You insert your computer into the docking station and start the computer. The network adapter is not detected during the startup process. You obtain a disk that contains the supported driver from the network adapter manufacturer. You want to allow Windows 2000 Professional to use the network adapter. What should you do?（）A、Restart the computer in the docking station.B、Run the Add/Remove Hardware wizard.C、Use Device Manager to scan for hardware changes.D、Copy the network adapter driver to the Winnt/Driver Cache/i386 folder.E、Install the new network adapter driver.
单选题A client has an existing Logical Partition (LPAR) on a p650 running AIX 5.2 and will be porting this LPAR to a p5 590. A mksysb has been run to tape, and a compatible tape drive is available and allocated to the target LPAR on the p5 590. What additional resource needs to be available on the p5 590?（）AA CD or DVD with installation mediaBAn internal SCSI adapter in the target LPARCAn Ethernet adapter for access to an FTP serverDAdvanced Power Virtualization feature of the p5 590
单选题You ran out of space and added a eighth disk to your SCSI-1 system. When you try to start， the system no longer boots. What is most likely the cause of this problem？（）A SCSI-1 supports only 8 devices including the adaptor.B SCSI-1 supports only 6 disks per adaptor.C There is a SCSI-ID conflict that causes that problem.D You forgot to set the SCSI-ID #8 for the new disk.
多选题You are the network administrator for ExamSheet. You have implemented the Hisecws.inf security template on all the Windows 2000 Professional client computers in your network. A user has received a driver and utility software for an internal SCSI controller in his computer. The SCSI controller is not currently on the Hardware Compatibility List (HCL). He uses the manufacturer provided CD to install the driver and the utility. He restarts the computer and reports that the internal SCSI controller is not working correctly. You discover that the driver is not installed correctly. You want to install the SCSI driver without permanently reducing security on the client computer. What should you do?（）ARun theSfc /cancelcommand.BRun theSigverifcommand.CReconfigure the Driver Signing option.DInstall the SCSI driver.ERun theSfc /enablecommand.FReapply the security template settings.
单选题A customer is ready to place an order for a p5-570 Express. The external storage proposed for this solution is a 1TB FAStT600 storage server. The customer now wishes to attach a SCSI LTO-2 tape drive to the server to enable them to backup their data. Which of the following should the pSeries technical specialist recommend for the tape drive？（）AAdd a PCI-X Dual Channel Ultra320 SCSI Adapter （FC 5712）.BAdd a PCI-X Fibre Channel Adapter （FC 5716）.CAdd the optional External SCSI Port Enablement Cable （FC 4273）.DUse the integrated external SCSI port on the p5-570 Express server.
单选题You install a SCSI adapter and a SCSI tape drive on your Windows 2000 Professional computer. You start the computer. Windows 2000 Professional detects and installs drivers for the new SCSI devices. Later the same day, you restart your computer. During the startup process, the computer stops loading Windows 2000 Professional. You then restart the computer and it stops again. You want to enable your Windows 2000 Professional computer to start successfully. What should you do? （）AStart the computer in safe mode. Enable driver signing.BStart the computer in safe mode. Use Device Manager to remove the SCSI tape device.CStart the computer by using the Recovery Console. Repair the Master Boot Record by using the fixmbr command.DStart the computer by using the Recovery Console. Disable the SCSI adapter device driver by using the disable command.
单选题You install a SCSI adapter and a SCSI tape drive on your Windows 2000 Professional computer. You start the computer and Windows 2000 Professional detects and installs drivers for the new SCSI devices. Later the same day, you restart your computer. During the startup process, the computer stops loading Windows 2000 Professional. You then restart the computer and it stops again. You want to enable your Windows 2000 Professional computer to start successfully. What should you do?（）AStart the computer in Safe Mode. Enable driver signing.BStart the computer in Safe Mode. Use Device Manager to remove the SCSI tape device.CStart the computer by using the Recovery Console. Repair the Master Boot Record by using the fixmbr command.DStart the computer by using the Recovery Console. Disable the SCSI adapter device driver by using the disable command.
单选题You install Windows 2000 Professional onto an NTFS partition on your computer. During theinstallation, you manually specify the OEM driver for the tape device SCSI controller. After theinstallation, you run the Winnt32 /cmdcons command. Then you successfully install the latest Windows2000 service pack.Next, you install an updated driver for the tape device SCSI controller. When you restart the system andlog on to the computer, you receive a stop error.You need to restore the functionality of the SCSI controller with the least amount of administrative effort. What should you do? （）ARestart the computer in Safe Mode. Reinstall the functional SCSI controller driver. BRestart the computer into Recovery Console. Replace the faulty SCSI controller driver with the functional one. CStart the computer by using a Windows 2000 Professional disk. Replace the faulty SCSI controller driver with the functional one. DInstall a parallel copy of Windows 2000 Professional in a separate folder. Copy the functional SCSI controller driver into the original system folder, and restart the computer to the previous installation.
单选题You are the network administrator for Company.com. Your computer has a CD-ROM drive attached to a SCSI adapter. You plan to upgrade your computer from Windows NT Workstation 4.0 to Windows 2000 Professional. You determine that the SCSI adapter is not included on the current Hardware Compatibility List (HCL) and that the original SCSI drivers that you used for Windows NT are not compatible with Windows 2000 Professional. You want to upgrade your computer to Windows 2000 Professional. What should you do?（）A Replace the SCSI adapter card with a Windows 2000 Professional compatible SCSI adapter. Start the installation from the Windows 2000 Professional CD-ROM. Add the new adapter card drivers when you are prompted. B Obtain Windows 2000 drivers from the SCSI adapter manufacturer. Copy the drivers to C:/Winnt folder. Start the installation from the Windows 2000 Professional CD-ROM. C Obtain Windows 2000 drivers from the SCSI adapter manufacturer. Start the installation by using the Windows 2000 Professional CD-ROM- Add the new adapter card drivers when you are prompted. D Modify Config.sys to use your existing SCSI adapter and existing CD-ROM drive. Using Windows NT 4.0, start the installation by running Winnt32.exe from the I386 folder on the Windows 2000 Professional CD-ROM.
多选题You are the network administrator for ExamSheet.net. You install Windows 2000 Professional on your portable computer. You use a docking station for your portable computer when you are in the office. You install a ISA-based network adapter in your docking station. You insert your computer into the docking station and start the computer. The network adapter is not detected during the startup process. You obtain a disk that contains the supported driver from the network adapter manufacturer. You want to allow Windows 2000 Professional to use the network adapter. What should you do?（）ARestart the computer in the docking station.BRun the Add/Remove Hardware wizard.CUse Device Manager to scan for hardware changes.DCopy the network adapter driver to the Winnt/Driver Cache/i386 folder.EInstall the new network adapter driver.
单选题Company.com wants to create four partitions on a pSeries p5-570 8-way with one SCSI PCI adapter connected to an external LTO tape drive. The partitions are to be created from an existing system image backup tape. Which of the following actions will enable the creation of the partitions with minimal intervention？（）AInstall a VIO partition to share the tape drive.BPurchase three external SCSI adapters and physically move the tape drive when needed.CCreate the partition definitions with the SCSI adapter as a desired resource and use DLPAR commands to move the tape drive.DCreate the partition definitions with the SCSI adapter as a required resource for all partitions and use DLPAR commands to move the tape drive.
单选题An administrator is up grading the back up server from a single tape drive to a SCSI tape library. The library has been unpackaged， mounted， and the library drivers installed. Which of the following items should the administrator have to connect the device to the backup server？（）A SCSI cableB SCSI interface adapter on the tape libraryC SCSI termination card on the serverD iSCSI cable
单选题ou need additional storage space on your Windows 2000 Professional computer. You install a second SCSI controller and a second hard disk. During the installation of the SCSI driver, you receive a warning that the driver is unsigned. You complete the installation of the driver and restart Windows 2000 Professional. During startup, you receive a Stop error. You need to correct the error and start Windows 2000 as quickly as possible. What should you do?（）AStart the computer in Recovery Console. Delete the SCSI controller driver.BStart the computer by using the last known good configuration.CStart the computer by using the Windows 2000 startup floppy disks， and repair the system files.DStart the computer by using the Windows 2000 startup floppy disks， and repair the registry.
单选题A customer has an x445 and uses the internal LSI adapter to manage two 146GB drives in the chassis. The customer is noticing performance issues when deploying a database with significant write activity on the internal drives. Should they consider using a ServeRAID-6M with 256MB of cache instead， and why or why not？（）AYes， the internal LSI SCSI adapter has no write cache.BYes， the internal LSI SCSI adapter is unreliable.CNo， the downtime to install the card and reformat the drives would be cost prohibitive.DNo， there will be no performance benefit， because drive performance is the bottleneck.
单选题Company.com is having trouble installing a fresh AIX image onto a newly defined partition on a p5-520. The assignment of the adapters to the each of the partitions is as follows： Fibre Channel Card 01 - partition one - required Fibre Channel Card 02 - partition one - required SCSI adapter 01 - partition one - desired IDE adapter 01 - partition one - required Ethernet adapter 01 - partition one - required Ethernet adapter 01 - partition two - required SCSI adapter 02 - partition two - required IDE adapter 01 - partition two - desired Which of the following actions will enable the installation of the AIX image？（）AChange the IDE adapter from desired to required in partition two and restart the partition to release the resource.BPurchase a SCSI DVD-ROM drive to connect to the SCSI adapter in partition two.CPurchase an LTO tape drive so that a system image backup can be created to install a new AIX partition.DChange the IDE adapter from required to desired in partition one and restart the partition to release the resource.