单选题When STP UplinkFast is enabled on a switch utilizing the default bridge priority， what will the new bridgepriority be changed to？（）A8192B16384C49152D65535
单选题
When STP UplinkFast is enabled on a switch utilizing the default bridge priority， what will the new bridgepriority be changed to？（）
A
8192
B
16384
C
49152
D
65535
参考解析
解析：
暂无解析
相关考题：
提高Caralyst 6500 发生直接链路失效的收敛速度，正确配置STP可选功能的命令是A．set spanctree backbenefast enableB．set spanctree uplinkfast enableC．set spanctree portfst3/2 enableD．set spanctree portfast bpdu-filter enable
（ 20 ）提高 Catalyst 6500 发生间接链路失效的收敛速度，正确配置 STP 可选功能的命令是A ） set spantree backbonefast enableB ） set spantree uplinkfast enableC ） set spantree portfast 3/2 enableD ） set spantree portfast bpdu-filter enable
为了提高Catalyst 6500交换机在发生直接链路失效时的收敛速度，正确配置STP可选功能的命令是______。A．set spantree portfast 3/2 enableB．set spantree backbonefast enableC．set spantree uplinkfast enableD．set spantree portfast bpdu-filter enable
When is a switched network that is running the Spanning Tree Protocol considered to be fully converged?A．when all switches have the same BID as the root switchB．when all switches have received the MAC address of each neighboring switchC．when every enabled switch port has been assigned a unique identifierD．when every operating switch port is in either the blocking or forwarding stateE．when all switches are in either client, server, or transparent mode
提高Catalyst 6500发生间接链路失效的收敛速度，正确配置STP可选功能的命令是______。A．set spantree backbonefast enableB．set spantree uplinkfast enableC．set spantree portfast 3/2 enableD．set spantree portfast bpdu-filter enable
When is a switched network that is running the Spanning Tree Protocol considered to be fully converged?（）A、when all switches have the same BID as the root switchB、when all switches have received the MAC address of each neighboring switchC、when every enabled switch port has been assigned a unique identifierD、when every operating switch port is in either the blocking or forwarding stateE、when all switches are in either client, server, or transparent mode
When NIC teaming is used, how are Loops avoided in a virtual switch?（）A、By using active / passive teaming with spanning tree on the active IinkB、By using active / passive teaming with onIy the active Iink in useC、By using active / activate teaming with VM utilizing both uplink ports
Which three of these pre-requisite for resetting a Catalyst Express 500 switch when Cisco Network Assistant is unavailable？（）A、At Least one enabled switch port that is unconnected to any deviceB、A PC pre-configured with a specific IP Address and MaskC、A PC or laptop with Windows 2000 or Windows XP installed and a web browser that has Java Script enabledD、Physical Access to SwitchE、A Switch with no connected devices
You have configured voice VLANs on Catalyst switch R1. Which two statements are true about the operation of voice VLANs on this device？ （）A、 When the voice VLAN feature is enabled， all untagged traffic is sent according to the default CoS priority of the port.B、 Enabling voice VLANs enables the switch to create multiple queues for traffic that is entering a port.C、 When voice VLANs are configured on a trunk link， UplinkFast must also be enabled.D、 Voice VLANs are configured to enable the switch to forward frames marked with the proper CoS values over separate physical links.E、 Enabling voice VLANs enables the switch to forward frames with a specific 802.1P marking.
Which two of the following statements describe a routed switch port on a multilayer switch？（）A、Layer 2 switching and Layer 3 routing are mutually supported.B、The port will not be associated with any VLAN.C、The routed switch port supports VLAN subinterfaces.D、The routed switch port is used when a switch has only one port per VLAN or subnet.E、The routed switch port ensures that STP remains in the forwarding state.
You work as a network Technician. A new workstation has consistently been unable to obtain anIP address from the DHCP server when the workstation boots. Older workstations function normally， and the new workstation obtains an address when manually forced to renew its address. What should be configured on the switch to allow the workstation to obtain an IP address at boot？（）A、UplinkFast on the switch port connected to the serverB、BackboneFast on the switch port connected to the serverC、PortFast on the switch port connected to the workstationD、trunking on the switch
Which two statements correctly describe UDLD？ （）A、Unidirectional link detection is achieved through monitoring STP BPDUs.B、It is recommended that it be enabled globally rather than on an individual port.C、When an error is detected， normal mode will disable a port.D、It is recommended that it be enabled in normal mode.E、It is recommended that it be used with the loop guard feature.
What two things will occur when an edge port receives a BPDU？（）A、The port immediately transitions to the Forwarding state.B、The switch generates a Topology Change Notification （TCN） BPDU.C、The port immediately transitions to the err-disable state.D、The port becomes a normal STP switch port.
Which two statements are true about BPDU port-guard and BPDU filtering？（）A、BPDU port-guard can be enabled globally， whereas BPDU filtering must be enabled on a per-interface basis.B、When globally enabled， BPDU port-guard and BPDU filtering apply only to PortFast enabled ports.C、When globally enabled， BPDU port-guard and BPDU filtering apply only to trunking-enabled ports.D、When a BPDU is received on a BPDU port-guard enabled port， the interface goes into the err-disabled state.E、When a BPDU is received on a BPDU filtering enabled port， the interface goes into the err-disabled state.F、When a BPDU is received on a BPDU filtering enabled port， the interface goes into the STP blocking state.
When STP UplinkFast is enabled on a switch utilizing the default bridge priority， what will the new bridge priority be changed to？（）A、8192B、16384C、49152D、65535
When STP UplinkFast is enabled on a switch utilizing the default bridge priority， what will the new bridgepriority be changed to？（）A、8192B、16384C、49152D、65535
Two Company switches are connected via a trunk using VTP. Which VTP information does a Catalyst switch advertise on its trunk ports when using VTP？（）A、STP root statusB、VTP modeC、Negotiation statusD、Management domainE、Configuration revision number
When the Catalyst switch R1 is enabled to use VTP， which information does it advertise on its trunk ports？（）A、 VTP modeB、 STP root statusC、 Negotiation statusD、 Management domainE、 Configuration revision number
A technician needs to add network capacity. However, when plugging a second switch into the first switch, there is no link light. Which of the following is the cause of this situation?（）A、The switches are not stackableB、The cable was not wired using 568AC、The cable needs to be a crossover cableD、The switches have IGMP snooping enabled
多选题You have configured voice VLANs on Catalyst switch R1. Which two statements are true about the operation of voice VLANs on this device？ （）AWhen the voice VLAN feature is enabled， all untagged traffic is sent according to the default CoS priority of the port.BEnabling voice VLANs enables the switch to create multiple queues for traffic that is entering a port.CWhen voice VLANs are configured on a trunk link， UplinkFast must also be enabled.DVoice VLANs are configured to enable the switch to forward frames marked with the proper CoS values over separate physical links.EEnabling voice VLANs enables the switch to forward frames with a specific 802.1P marking.
单选题A technician needs to add network capacity. However, when plugging a second switch into the first switch, there is no link light. Which of the following is the cause of this situation?（）AThe switches are not stackableBThe cable was not wired using 568ACThe cable needs to be a crossover cableDThe switches have IGMP snooping enabled
单选题When NIC teaming is used ,how are loops avoided in a virtual switch?（）ABy using active / passive teaming with spanning tree on the active linkBBy using active / passive teaming with only the active link in useCBy using active / active teaming with VM utilizing both uplink ports
多选题When the Catalyst switch R1 is enabled to use VTP， which information does it advertise on its trunk ports？（）AVTP modeBSTP root statusCNegotiation statusDManagement domainEConfiguration revision number
多选题On a Nexus 5000 Series Switch， when a VFC is not online， what are the causes？（）ALLDP transmit and receive are disabledBThe initiator server has no connectivity to the target storageCFIP negotiation timingDPeer does not support LLDPEVSAN trunk protocol has been enabled
多选题What two things will occur when an edge port receives a BPDU？（）AThe port immediately transitions to the Forwarding state.BThe switch generates a Topology Change Notification （TCN） BPDU.CThe port immediately transitions to the err-disable state.DThe port becomes a normal STP switch port.
多选题Which three of these pre-requisite for resetting a Catalyst Express 500 switch when Cisco Network Assistant is unavailable？（）AAt Least one enabled switch port that is unconnected to any deviceBA PC pre-configured with a specific IP Address and MaskCA PC or laptop with Windows 2000 or Windows XP installed and a web browser that has Java Script enabledDPhysical Access to SwitchEA Switch with no connected devices
多选题Which two of the following statements describe a routed switch port on a multilayer switch？（）ALayer 2 switching and Layer 3 routing are mutually supported.BThe port will not be associated with any VLAN.CThe routed switch port supports VLAN subinterfaces.DThe routed switch port is used when a switch has only one port per VLAN or subnet.EThe routed switch port ensures that STP remains in the forwarding state.
单选题When STP UplinkFast is enabled on a switch utilizing the default bridge priority， what will the new bridge priority be changed to？（）A8192B16384C49152D65535