单选题Study the Exhibit below carefully: London#show vtp VTP Version: 2 Configuration Revision: 0 Maximum VLANs supported locally: 64 Number of existing VLANs: 5 VTP Operating Mode: Client VTP Domain Name: London VTP Pruning Mode: Disabled VTP V2 Mode: Disabled VTP Traps Generation: Disabled Based on the information given above, what is the VTP function of this particular switch?（）ALearn and save VTP configuration in the running configuration.BCreate and change VLANs.CForwards information about VTP configuration.DVTP is disabled on this device.EVTP is not saved to NVRAM.
单选题
Study the Exhibit below carefully: London#show vtp VTP Version: 2 Configuration Revision: 0 Maximum VLANs supported locally: 64 Number of existing VLANs: 5 VTP Operating Mode: Client VTP Domain Name: London VTP Pruning Mode: Disabled VTP V2 Mode: Disabled VTP Traps Generation: Disabled Based on the information given above, what is the VTP function of this particular switch?（）
A
Learn and save VTP configuration in the running configuration.
B
Create and change VLANs.
C
Forwards information about VTP configuration.
D
VTP is disabled on this device.
E
VTP is not saved to NVRAM.
参考解析
解析：
暂无解析
相关考题：
某局域网内交换机为VTP SERVER,VTP Domain Name:CISCO,Configuration Revision:4,下面哪台交换机可以同步到它的VTP配置()。 A.Mode：Transparent，Domain Name：CISCO，Configuration Revision：3B.Mode：Client，Domain Name：CISCO，Configuration Revision：3C.Mode：Client，Domain Name：CISCO，Configuration Revision：5D.Mode：Client，Domain Name：CISCO1，Configuration Revision：3
阅读下面的配置信息，将(1)～(4)处空缺的内容填写在相应位置。SW1＞enable (进入特权模式)SW1vlan database (进入VLAN配置子模式)SW1(vlan)vtp server (设置本交换机为Server模式)SW1(vlan)vtp domain (1) (设置域名)SW1(vlan) (2) (启动修剪功能)SW1(vlan)exit (退出VLAN配置模式)SW1show (3) (查看VTP设置信息)VTP Vetsion :2Configuration Revision :0Maximum VLANs supported locrlly :64Number of existing VLANs :1VTP Operating Mode :ServerVTP Domain Name :Server1VTP Pruning Mode :EnableVTP V2 Mode :DisabledVTP Traps Generation :DisabledMD5 digest :0x82 0x6B 0xFB 0x94 0x41 0xEF 0x92 0x30Configuration last modified by 0.0.0.0 at 7-1-05 00:07:51SW2vlan databaseSW2(vlan)vtp domain NULLSW2(vlan) (4)Setting device to VTP CLIENT mode.SW2(vlan)exit
如下图所示，利用VLAN技术可以把物理上连接的网络从逻辑上划分为多个不同的虚拟子网，可以对各个子网实施不同的管理策略。阅读以下的配置信息，将 【6】 ～【10】 处空缺的内容填写在答题纸相应位置。SWlenable （进入特权模式）SWlvaln database （设置VLAN配置子模式）SWl(valn)vtp server （设置本交换机为Server模式）SWl(valn)vtp domain 【6】 （设置域名）SWl(valn) __【7】 （启动修剪功能）SWl(valn)exit （退出VLAN配置模式）SWlshow【8】 （查看VTP设置信息）VTP version:2ConfigurationRevision: 0Maximum VLANs supposedlocally: 64Number of existing VLANs: 1VTP Operating Mode: ServerVTP Domain Name: ServerlVTP Pruning Mode: EnableVTP V2 Mode：DisabledVTP Traps Generation: DisabledMD5 digest: Ox82 0x6B OxFB Ox94 0x41 0xEF Ox92 0x30Configuration last modified by 0.0.0.0 at 5-1-03 00: 06: 44SW2valn databaseSW2(valn)vtp domain NULLSW2(vlan) 【9】 （修改交换机SW2的VTP的工作模式为VTP客户机）Setting device to VTP CLIENT modeSW2(vlan) 【10】 （退出）
阅读以下的配置信息，将(1)～(4)处空缺的内容填写相应的位置。SW1＞enable //进入特权模式SW1vlan database //进入vlan配置子模式SW1(lan)vtp server //设置本交换机为Server模式SW1(lan)vtp domain(1) //设置域名SW1(lan)(2) //启动修剪功能SW1(lan)exit //退出vlan配置模式SW1(lan)(3) //查看vtp设置信息VTP version:2Configuration Revision:0Maximum VLANs supported locally:64Number of existing VLANs:1VTP Operating Mode:ServerlVTP domain Name:ServerlVTP pruning Mode:EnableVTP V2 Mode:DisabledVTP Traps Generation:DisabledMD5 digest:0x82 0x6B 0xFB 0x94 0xEF 0x92 0x30Configuartion last modified by 0.0.0.0 at 7-1-05 00:07:51SW2vlan databaseSW2(vlan)vtp domain NULLSW2(vlan)(4)Swtting device to VTP CLIENT modeSW2(vlan)exit
What is the purpose of the command shown below?vtp password Fl0r1da() A. It is used to validate the sources of VTP advertisements sent between switches.B. It is used to access the VTP server to make changes to the VTP configuration.C. It allows two VTP servers to exist in the same domain, each configured with different passwords.D. It is the password required when promoting a switch from VTP client mode to VTP server mode.E. It is used to prevent a switch newly added to the network from sending incorrect VLAN information to the other switches in the domain.
What are two results of entering the Switch(config) vtp mode client command on a Catalyst switch?() A. The switch will ignore VTP summary advertisementsB. The switch will forward VTP summary advertisementsC. The switch will process VTP summary advertisementsD. The switch will originate VTP summary advertisementsE. The switch will create, modify and delete VLANs for the entire VTP domain
You are a senior network administrator at TestKing and your trusty junior administrator tells you that he failed his task of adding VLAN 50 to a Catalyst switch in the network. You enter in the ‘show vtp status‘ command and get this output:TK2 show vtp statusVTP Version :2Configuration Revision :7Maximum VLANs supported local :68Number of existing VLANs :8VTP Operating Mode :ClientVTP Domain Name :corpVTP Pruning Mode :DisabledVTP V2 Mode :DisabledVTP Traps Generation :DisabledMD5 digest :0x22 0xF3 0x1AConfiguration last modified by 172.18.22.15 at 5-28-03 1t:53:20What commands must be issued on this switch to add VLAN 50 to the database?（）A. TK2(config-if)# switchport access vlan 50B. TK2(vlan)# vtp serverC. TK2(config)# config-revision 20D. TK2(config)# vlan 50 name TechE. TK2(vlan)# vlan 50F. TK2(vlan)# switchport trunk vlan 50
A network administrator is explaining VTP configuration to a new technician. What should the network administrator tell the new technician about VTP configuration?() A. A switch in the VTP client mode cannot update its local VLAN database.B. A trunk link must be configured between the switches to forward VTP updates.C. A switch in the VTP server mode can update a switch in the VTP transparent mode.D. A switch in the VTP transparent mode will forward updates that it receives to other switches.E. A switch in the VTP server mode only updates switches in the VTP client mode that have a higher VTP revision number.F. A switch in the VTP server mode will update switches in the VTP client mode regardless of the configured VTP domain membership.
What are two characteristics of a switch that is configured as a VTP client?() A.if a switch that is configured to operate in client mode cannot access a VTP server,then the switch reverts to transparent mode.B.The local vlan configuration is updated only when an update that has a higher configuration revision number is received.C.Vtp advertisements are not forwarded to neighboring switches that are configured in vtp transparent mode.D.When switches in vtp client mode are rebooted,they send a vtp advertisement request to the vtp servers.E.Vtp client is the default vtp modeF.On switches that are configured to operate in client mode ,vlans can be created,deleted,or renamed locally
What is the purpose of the command shown below?vtp password Fl0r1da（）A、It is used to validate the sources of VTP advertisements sent between switches.B、It is used to access the VTP server to make changes to the VTP configuration.C、It allows two VTP servers to exist in the same domain, each configured with different passwords.D、It is the password required when promoting a switch from VTP client mode to VTP server mode.E、It is used to prevent a switch newly added to the network from sending incorrect VLAN information to the other switches in the domain.
Which two statements correctly describe VTP？（）A、Transparent mode always has a configuration revision number of 0.B、Transparent mode cannot modify a VLAN database.C、Client mode cannot forward received VTP advertisements.D、Client mode synchronizes its VLAN database from VTP advertisements.E、Server mode can synchronize across VTP domains.
A VTP domain has six active VLANs. Without notice， all VLANs except VLAN1 fail. Just prior tothe failure， Switch2 was added to the network. Which three issues on Switch2 could be the cause？（）A、Switch2 is configured for only VLAN1B、Switch2 is a VTP server in a different domainC、Switch2 is a VTP server in the Company domainD、Switch2 is not a VTP domain.E、Switch2 has a lower VTP configuration revision number than the current VTP revisionF、Switch2 has a higher VTP configuration revision number than the current VTP revision
The Company switches are configured to use VTP. What’s true about the VLAN trunking protocol （VTP）？（）A、VTP messages will not be forwarded over nontrunk links.B、VTP domain names need to be identical. However，case doesn’t matter.C、A VTP enabled device which receives multiple advertisements will ignore advertisements with higher configuration revision numbers.D、A device in "transparent" VTP v.1 mode will not forward VTP messages.E、VTP pruning allows switches to prune VLANs that do not have any active ports associated with them.
What are two characteristics of a switch that is configured as a VTP client？（）A、if a switch that is configured to operate in client mode cannot access a VTP server，then the switch reverts to transparent mode.B、The local vlan configuration is updated only when an update that has a higher configuration revision number is received.C、Vtp advertisements are not forwarded to neighboring switches that are configured in vtp transparent mode.D、When switches in vtp client mode are rebooted，they send a vtp advertisement request to the vtp servers.E、Vtp client is the default vtp modeF、On switches that are configured to operate in client mode ，vlans can be created，deleted，or renamed locally
What are two results of entering the Switch(config)# vtp mode client command on a Catalyst switch?（）A、The switch will ignore VTP summary advertisements.B、The switch will forward VTP summary advertisements.C、The switch will process VTP summary advertisements.D、The switch will originate VTP summary advertisements.E、The switch will create, modify and delete VLANs for the entire VTP domain.
Which VTP mode is capable of creating only local VLANs and does not synchronize with other switches in the VTP domain?（）A、clientB、dynamicC、serverD、staticE、transparent
What are two results of entering the Switch(config)# vtp mode client command on a Catalyst switch?（）A、The switch will ignore VTP summary advertisementsB、The switch will forward VTP summary advertisementsC、The switch will process VTP summary advertisementsD、The switch will originate VTP summary advertisementsE、The switch will create, modify and delete VLANs for the entire VTP domain
Before inserting a new switch in the network，the network administrator checks that the VTP domain name is correct，the VTP mode is set to server， and revision is lower than the switches in the network. The administrator then configures interfaces and trunks，erases existing VLANs，and connects the switch to the network. Following that procedure，there is no connectivity in the network. What is a possible cause of this problem？（）A、Because the configuration revision of the new switches is lower than the rest of the network， it can change the VLAN database of the other switches.B、As a VTP server， the new switch deleted all VLANs of the network.C、Erasing VLANs increases the VTP configuration revision.D、Since the configuration revision of the network is higher than the new switch， the VLAN database was automatically synchronized.
Study the Exhibit below carefully: London#show vtp VTP Version: 2 Configuration Revision: 0 Maximum VLANs supported locally: 64 Number of existing VLANs: 5 VTP Operating Mode: Client VTP Domain Name: London VTP Pruning Mode: Disabled VTP V2 Mode: Disabled VTP Traps Generation: Disabled Based on the information given above, what is the VTP function of this particular switch?（）A、Learn and save VTP configuration in the running configuration.B、Create and change VLANs.C、Forwards information about VTP configuration.D、VTP is disabled on this device.E、VTP is not saved to NVRAM.
单选题Before inserting a new switch in the network，the network administrator checks that the VTP domain name is correct，the VTP mode is set to server， and revision is lower than the switches in the network. The administrator then configures interfaces and trunks，erases existing VLANs，and connects the switch to the network. Following that procedure，there is no connectivity in the network. What is a possible cause of this problem？（）ABecause the configuration revision of the new switches is lower than the rest of the network， it can change the VLAN database of the other switches.BAs a VTP server， the new switch deleted all VLANs of the network.CErasing VLANs increases the VTP configuration revision.DSince the configuration revision of the network is higher than the new switch， the VLAN database was automatically synchronized.
单选题What is the purpose of the command shown below? vtp password Fl0r1da（）。AIt is used to validate the sources of VTP advertisements sent between switches.BIt is used to access the VTP server to make changes to the VTP configuration.CIt allows two VTP servers to exist in the same domain， each configured with different passwords.DIt is the password required when promoting a switch from VTP client mode to VTP server mode.EIt is used to prevent a switch newly added to the network from sending incorrect VLAN information to the other switches in the domain.
多选题What are two characteristics of a switch that is configured as a VTP client？（）Aif a switch that is configured to operate in client mode cannot access a VTP server，then the switch reverts to transparent mode.BThe local vlan configuration is updated only when an update that has a higher configuration revision number is received.CVtp advertisements are not forwarded to neighboring switches that are configured in vtp transparent mode.DWhen switches in vtp client mode are rebooted，they send a vtp advertisement request to the vtp servers.EVtp client is the default vtp modeFOn switches that are configured to operate in client mode ，vlans can be created，deleted，or renamed locally
多选题What are two results of entering the Switch(config)# vtp mode client command on a Catalyst switch?（）AThe switch will ignore VTP summary advertisements.BThe switch will forward VTP summary advertisements.CThe switch will process VTP summary advertisements.DThe switch will originate VTP summary advertisements.EThe switch will create, modify and delete VLANs for the entire VTP domain.
单选题Assuming default setting，how can you erase the VTP database of VLANs on a CISCO IOS switch running in VTP server mode？（）AEnable VTP pruningBFrom privileged mode，erase the startup configuration file，then reload.CFrom privileged mode，erase the vlan date file，then reload.DCycle the switch power.
多选题Which two statements correctly describe VTP？（）ATransparent mode always has a configuration revision number of 0.BTransparent mode cannot modify a VLAN database.CClient mode cannot forward received VTP advertisements.DClient mode synchronizes its VLAN database from VTP advertisements.EServer mode can synchronize across VTP domains.
单选题Which VTP mode is capable of creating only local VLANs and does not synchronize with other switches in the VTP domain?（）AclientBdynamicCserverDstaticEtransparent
单选题Study the Exhibit below carefully: London#show vtp VTP Version: 2 Configuration Revision: 0 Maximum VLANs supported locally: 64 Number of existing VLANs: 5 VTP Operating Mode: Client VTP Domain Name: London VTP Pruning Mode: Disabled VTP V2 Mode: Disabled VTP Traps Generation: Disabled Based on the information given above, what is the VTP function of this particular switch?（）ALearn and save VTP configuration in the running configuration.BCreate and change VLANs.CForwards information about VTP configuration.DVTP is disabled on this device.EVTP is not saved to NVRAM.
多选题A VTP domain has six active VLANs. Without notice， all VLANs except VLAN1 fail. Just prior tothe failure， Switch2 was added to the network. Which three issues on Switch2 could be the cause？（）ASwitch2 is configured for only VLAN1BSwitch2 is a VTP server in a different domainCSwitch2 is a VTP server in the Company domainDSwitch2 is not a VTP domain.ESwitch2 has a lower VTP configuration revision number than the current VTP revisionFSwitch2 has a higher VTP configuration revision number than the current VTP revision