单选题A prospective customer has selected Fiber Channel （FC） for performance reasons. The prospect does not appear to understand the terminology and options of the fiber channel but is very interested in learning before investing money in this technology. What steps should be taken to make sure the customer is satisfied with the solution？（）ASend customer links to documentation for the FC components included in the solutionBDirect the customer to Red Books and White Papers on FC technologiesCWork with business partner to include Lab Services engagement to setup FC environment and perform knowledge transferDSwitch toiSCSI
单选题
A prospective customer has selected Fiber Channel （FC） for performance reasons. The prospect does not appear to understand the terminology and options of the fiber channel but is very interested in learning before investing money in this technology. What steps should be taken to make sure the customer is satisfied with the solution？（）
A
Send customer links to documentation for the FC components included in the solution
B
Direct the customer to Red Books and White Papers on FC technologies
C
Work with business partner to include Lab Services engagement to setup FC environment and perform knowledge transfer
D
Switch toiSCSI
参考解析
解析：
暂无解析
相关考题：
A Fibre Channel fabric （or Fibre Channel switched fabric， FC-SW） is a switched fabric of FibreChannel devices enabled by a Fibre Channel switch. Fabrics are normally subdivided by Fibre Channel zoning. Each fabric has a name server and provides other services. Higher redundancy over FC-AL，P2P.Which path selection protocol is used by Fibre Channel fabrics？（）A、 OSPFB、 RIPC、 FSPFD、 VSANs
A Fibre Channel fabric (or Fibre Channel switched fabric, FC-SW) is a switched fabric of Fibre Channel devices enabled by a Fibre Channel switch. Fabrics are normally subdivided by Fibre Channel zoning.Each fabric has a name server and provides other services. Higher redundancy over FC-AL, P2P.Which path selection protocol is used by Fibre Channel fabrics?（）A、OSPFB、RIPC、FSPFD、VSANs
What interface is created when an FC Port Channel is created on a Cisco Unified Computing System？（）A、 An interface ’san-port-channel’ in NXOSB、 An interface ’port-channel’ in NXOSC、 An interface ’port-channel’ with ’mode fc’ configuredD、 An interface ’fc-port-channel’ in NXOS
A server has lost communication to its drives located on a fiber channel SAN.An administrator notices that the indicator lights on both the HBA and the SAN switch are not lit.Which of the following are the MOST likely causes of the problem？（）A、Failed HBAB、Failed switch portC、Faulty fiber cableD、Faulty driverE、Failed hard drivesF、Faulty configuration
A particular UCS system has 8 fiber channel uplinks c0nfigured How many VSANs are Supported by this configuration?（）A、fourB、eightC、sixteenD、thirty-two
The staff is not able to access a database server. The server has an ’Operating System not found’error and is set to boot from a fiber channel SAN. All other database servers are set to boot from the SAN and access the same switch and data as this database server. Which of the following is the MOST likely cause of the problem？（）A、The SAN is offlineB、Fiber channel switchC、Multiple failed drives in the SAND、HBA
A customer has purchased a triple channel memory kit containing three DDR3 RAM modules. Theserver the RAM is intended for only has a dual channel capable motherboard. Which of the following is the BEST action to perform？（）A、Install only two modules as the RAM has to be installed in pairsB、Purchase one additional RAM module to make it even. Three modules will function as triplechannel and the additional module will be for parityC、Purchase dual channel memory. The triple channel memory may be incompatible with theserver motherboardD、Install the RAM.Two modules will perform as dual channel and one as single channel
A system administrator has been instructed to attach storage in their client LPARs, in a Power 770, with fibre channel adapters using N_port ID virtualization (NPIV). Which of the following partitions has the minimum requirements to utilize virtual fibre channel?（）A、LPAR-A with 1Gb FC HBA and SAN connectionB、LPAR-B with 2Gb FC HBA and SAN connectionC、LPAR-C with 4Gb FC HBA and SAN connectionD、LPAR-D with 8Gb FC HBA and SAN connection
A prospective customer has a SCSI installed. The new project requires a large high performance storage and tape network . The customer does not appear to understand the terminology and options of the fiber channel components of the solution. Further discussion confirms that the customers only has cursory knowledge of fiber channel and is not currently prepared to for the installation. What steps should be taken to make sure customer is satisfied with the solution？ （）A、Suggest a cloud networkB、Direct the customer to redbooks and white papers on FC technologiesC、Work with business partner to include Lab Service engagement to setup FC environment and perform knowledge transferD、Switch project to iSCSI
A customer has an 8-way p5-570 with eight internal disk drives and AIX 5.2. Which of the following must be added， if anything， to the configuration to support four LPARs， assuming each LPAR requires twodisk drives？（）A、7311-D20 drawer with four disksB、Upgrade to AIX 5.3C、Fiber adapters to attach to SAND、Nothing
An IBM Business Partner has sold a DS5020 and new IBM SAN switches to replace a customer EMC storage infrastructure. The customer dissatisfaction has arisen during the installation because according to the DS5020 interoperability matrix， two HP Proliant servers running Exchange have FC HBAs that are not supported. Which of the following is the most probable cause of the customer dissatisfaction（）A、The EMC storage specialist has not participated in the TDA meetingB、The FC HBAs are 4 Gbps technologyC、The Technical and Delivery Assessment review actions were not executedD、The customer should have checked that the HBAs are supported according to the HP storage interoperability matrix
A customer has two sites located 500 kilometers apart. The customer has both a high-speedInternet link and dark fiber between the sites. The customer wants to utilize storage resources ateither site leveraging replication for disaster recovery implementations. The customer wants to linkthese two sites together. Which option provides the highest performance and is most reliable？（）A、iFCP routerB、FCIP routerC、DWDM and CWDMD、LC multi-mode 50 micron fiber
A customer is ready to order a pSeries solution. However， the pSeries technical specialist is unsure whether the customer preferred the fibre channel or the external SCSI disk attachment option. What is the most appropriate action for the specialist to take next？（）A、Ask the customer to confirm which option is best for their environment.B、Order the fibre channel option and purchase a converter later if necessary.C、Order both SCSI and fibre channel adapters to cover both potential options.D、Inform the customer that fibre channel was selected for performance reasons.
A prospective customer has selected Fiber Channel （FC） for performance reasons. The prospect does not appear to understand the terminology and options of the fiber channel but is very interested in learning before investing money in this technology. What steps should be taken to make sure the customer is satisfied with the solution？（）A、Send customer links to documentation for the FC components included in the solutionB、Direct the customer to Red Books and White Papers on FC technologiesC、Work with business partner to include Lab Services engagement to setup FC environment and perform knowledge transferD、Switch toiSCSI
A customer has the following equipment installed in their data center： （1）an IBM BladeCenter H chassis （2）two power supplies （3）six HS22V blades （4）three Nortel 1/10 GB ESMs The retail customer purchased a new HX5 with MAX5. Which of the following must be added to install the HX5 with MAX5？（）A、Two additional power suppliesB、Fibre Channel （FC） switches and SAN storageC、A Nortel 1/10 GB ESMD、SSD for the HX5
An IBM technician specialist has a prospective customer who is excited about eX5 and is working on configuration for a very large complex opportunity. During the engagement the customer has changed the design several times and has significantly increased the scope. The customers recently selected a Business Partner who has been involved in the last few design changes. What steps should the IBM technician specialist take to make sure the customer is satisfied with the solution？（）A、Turn over current design to Techline to create configurationsB、Perform knowledge transfer of design requirements to Business partner then disengageC、Work with Business Partner to engage Techline to assist with configuration and request technical and Delivery Assessment （TDA）D、Work with business partner to engage Techline to create configurations
A media customer has an IBM BladeCenter E with ten HS22 Blade server installed. Currently only one Ethernet port is available for each server. What is required to enable the second port on eachserver？（）A、Fiber Channel Switch ModuleB、Gb Ethernet expansion cardC、Myrinet Cluster expansion cardD、Ethernet Switch Module
A prospective customer has selected Fiber Channel (FC) for performance reasons. The prospect does not appear to understand the terminology and options of the fiber channel but is very interested in learning before investing money in this technology.What steps should be taken to make sure the customer is satisfied with the solution?（）A、Send customer links to documentation for the FC components included in the solution B、Direct the customer to Red Books and White Papers on FC technologies C、Work with business partner to include Lab Services engagement to setup FC environment and perform knowledge transfer D、Switch to iSCSI
单选题An IBM Business Partner has sold a DS5020 and new IBM SAN switches to replace a customer EMC storage infrastructure. The customer dissatisfaction has arisen during the installation because according to the DS5020 interoperability matrix， two HP Proliant servers running Exchange have FC HBAs that are not supported. Which of the following is the most probable cause of the customer dissatisfaction（）AThe EMC storage specialist has not participated in the TDA meetingBThe FC HBAs are 4 Gbps technologyCThe Technical and Delivery Assessment review actions were not executedDThe customer should have checked that the HBAs are supported according to the HP storage interoperability matrix
单选题A Fibre Channel fabric （or Fibre Channel switched fabric， FC-SW） is a switched fabric of FibreChannel devices enabled by a Fibre Channel switch. Fabrics are normally subdivided by Fibre Channel zoning. Each fabric has a name server and provides other services. Higher redundancy over FC-AL，P2P.Which path selection protocol is used by Fibre Channel fabrics？（）A OSPFB RIPC FSPFD VSANs
单选题A customer has four AIX partitions that require a SAN. The disk subsystem must replicate to aremote site via an IP network. Each site has two Cisco MDS 9509 directors with fibre channel linecards. Which of the following must be added to each director to meet the IP requirement？（）Atri-rate SFPBupdate to the latest Cisco IOSCFCIP activation on the existing 16 FC line cardsDMultiprotocol Services Module with FCIP activation
单选题A particular UCS system has 8 fiber channel uplinks configured. How many VSANs are supports by this configuration?（）AfourBeightCsixteenDthirty-two
单选题A customer has provided the pSeries technical specialist with details of an HACMP solution that they would like validated. The solution is for two POWER4+ p630 servers directly attached to a FAStT600 storage server as the shared storage. Each system has the following： ？ 2 integrated network ports ？ 2 fibre channel adapter cards ？ 1 power supply and redundant cooling ？ HACMP v5.1 In addition to a second power supply， what further requirements， if any， are needed to validate this solution and ensure no single point of failure？ （）AOne fibre channel switchBTwo fibre channel switchesCTwo Ethernet cardsDNothing
单选题A customer is ready to place an order for a p5-570 Express. The external storage proposed for this solution is a 1TB FAStT600 storage server. The customer now wishes to attach a SCSI LTO-2 tape drive to the server to enable them to backup their data. Which of the following should the pSeries technical specialist recommend for the tape drive？（）AAdd a PCI-X Dual Channel Ultra320 SCSI Adapter （FC 5712）.BAdd a PCI-X Fibre Channel Adapter （FC 5716）.CAdd the optional External SCSI Port Enablement Cable （FC 4273）.DUse the integrated external SCSI port on the p5-570 Express server.
多选题A server has lost communication to its drives located on a fiber channel SAN.An administrator notices that the indicator lights on both the HBA and the SAN switch are not lit.Which of the following are the MOST likely causes of the problem？（）AFailed HBABFailed switch portCFaulty fiber cableDFaulty driverEFailed hard drivesFFaulty configuration
单选题A customer business requirement addresses data encryption implemented in tape and disk media. They plan to deploy a DS8700 to provide enterprise class storage and plan to configure the DS8700 with SSD and Fiber Channel disk drives. Which statement is TRUE regarding disk encryption（）ASSD disk encryption does not consume spaceBSSD disk is faster than FC disk for encryptionCno space is wasted due to encryption on DS8700Dthere is higher processor utilization using FDE drives